Daily Papers

Agent Skills package reusable procedural knowledge as external artifacts for frozen language-model agents, yet existing optimizers do not jointly resolve where a failure occurs in a workflow, which mechanism caused it, and how relevant knowledge from third-party Skills should be reused locally. We introduce Workflow-Localized Mechanism Learning (WML). Its Node--Mechanism Attribution identifies the failed workflow node, implicated mechanisms, and smallest valid edit target, routing single-mechanism defects to L3 resources and relational defects across mechanisms to L2 composition protocols. A six-module Workflow-Guided Skill Optimization (WGSO) loop then selects provenance- and scope-aware third-party knowledge, applies bounded patches, evaluates candidates, and stores verified outcomes in optimizer-side memory. On SpreadsheetBench, WML reaches 90.33 +/- 1.53 and 74.67 +/- 3.51 Hard Accuracy with DeepSeek and Qwen3.6-Flash, respectively; without additional optimization, the learned Skills transfer to WikiTableQuestions with 84.00 +/- 2.00 and 83.00 +/- 2.00 Denotation Accuracy. On Compiler-Supported50, WML attains both the highest hard-PASS rate and the lowest cost per successful task; compiled execution sharply reduces tokens and calls relative to a direct SkillAgent while retaining most of its successful tasks. Code and artifacts are available at https://github.com/xiaolin9595/workflow-localized-mechanism-learning.

Text-to-SQL has recently achieved impressive progress, yet remains difficult to apply effectively in real-world scenarios. This gap stems from the reliance on single static workflows, fundamentally limiting scalability to out-of-distribution and long-tail scenarios. Instead of requiring users to select suitable methods through extensive experimentation, we attempt to enable systems to adaptively construct workflows at inference time. Through theoretical and empirical analysis, we demonstrate that optimal dynamic policies consistently outperform the best static workflow, with performance gains fundamentally driven by heterogeneity across candidate workflows. Motivated by this, we propose SquRL, a reinforcement learning framework that enhances LLMs' reasoning capability in adaptive workflow construction. We design a rule-based reward function and introduce two effective training mechanisms: dynamic actor masking to encourage broader exploration, and pseudo rewards to improve training efficiency. Experiments on widely-used Text-to-SQL benchmarks demonstrate that dynamic workflow construction consistently outperforms the best static workflow methods, with especially pronounced gains on complex and out-of-distribution queries. The codes are available at https://github.com/Satissss/SquRL

Recent studies have shown that carefully designed workflows coordinating large language models(LLMs) significantly enhance task-solving capabilities compared to using a single model. While an increasing number of works focus on autonomous workflow construction, most existing approaches rely solely on historical experience, leading to limitations in efficiency and adaptability. We argue that while historical experience is valuable, workflow construction should also flexibly respond to the unique characteristics of each task. To this end, we propose an a priori dynamic framework for automated workflow construction. Our framework first leverages Q-table learning to optimize the decision space, guiding agent decisions and enabling effective use of historical experience. At the same time, agents evaluate the current task progress and make a priori decisions regarding the next executing agent, allowing the system to proactively select the more suitable workflow structure for each given task. Additionally, we incorporate mechanisms such as cold-start initialization, early stopping, and pruning to further improve system efficiency. Experimental evaluations on four benchmark datasets demonstrate the feasibility and effectiveness of our approach. Compared to state-of-the-art baselines, our method achieves an average improvement of 4.05%, while reducing workflow construction and inference costs to only 30.68%-48.31% of those required by existing methods.

Recent advancements in large language models (LLMs) have driven a revolutionary paradigm shift in process automation from Robotic Process Automation to Agentic Process Automation by automating the workflow orchestration procedure based on LLMs. However, existing LLMs (even the advanced OpenAI GPT-4o) are confined to achieving satisfactory capability in workflow orchestration. To address this limitation, we present WorkflowLLM, a data-centric framework elaborately designed to enhance the capability of LLMs in workflow orchestration. It first constructs a large-scale fine-tuning dataset WorkflowBench with 106,763 samples, covering 1,503 APIs from 83 applications across 28 categories. Specifically, the construction process can be divided into three phases: (1) Data Collection: we collect real-world workflow data from Apple Shortcuts and RoutineHub, transcribing them into Python-style code. We further equip them with generated hierarchical thought via ChatGPT. (2) Query Expansion: we prompt ChatGPT to generate more task queries to enrich the diversity and complexity of workflows. (3) Workflow Generation: we leverage an annotator model trained on collected data to generate workflows for synthesized queries. Finally, we merge the synthetic samples that pass quality confirmation with the collected samples to obtain the WorkflowBench. Based on WorkflowBench, we fine-tune Llama-3.1-8B to obtain WorkflowLlama. Our experiments show that WorkflowLlama demonstrates a strong capacity to orchestrate complex workflows, while also achieving notable generalization performance on previously unseen APIs. Additionally, WorkflowBench exhibits robust zero-shot generalization capabilities on an out-of-distribution task planning dataset, T-Eval. Our data and code are available at https://github.com/OpenBMB/WorkflowLLM.

Large language models (LLMs) have demonstrated remarkable potential in solving complex tasks across diverse domains, typically by employing agentic workflows that follow detailed instructions and operational sequences. However, constructing these workflows requires significant human effort, limiting scalability and generalizability. Recent research has sought to automate the generation and optimization of these workflows, but existing methods still rely on initial manual setup and fall short of achieving fully automated and effective workflow generation. To address this challenge, we reformulate workflow optimization as a search problem over code-represented workflows, where LLM-invoking nodes are connected by edges. We introduce AFlow, an automated framework that efficiently explores this space using Monte Carlo Tree Search, iteratively refining workflows through code modification, tree-structured experience, and execution feedback. Empirical evaluations across six benchmark datasets demonstrate AFlow's efficacy, yielding a 5.7% average improvement over state-of-the-art baselines. Furthermore, AFlow enables smaller models to outperform GPT-4o on specific tasks at 4.55% of its inference cost in dollars. The code will be available at https://github.com/geekan/MetaGPT.

Workflow generation in visual creation systems such as ComfyUI demands not only syntactic accuracy but also expert-level reasoning over modular compositions. Existing large language model (LLM) approaches often treat this as a direct text-to-JSON generation task, struggling with structural brittleness and lacking the experiential knowledge required for effective design. We argue that successful workflow generation requires modeling knowledge itself, including its structure, hierarchy, and reasoning dynamics. To this end, we propose a knowledge-centric framework that learns to invert, inject, and infer with knowledge across multiple abstraction levels. We first perform knowledge inversion to distill hierarchical representations, ranging from full pseudo-codes and skeletons to high-level strategies, from large collections of real-world workflows. We then conduct knowledge injection through supervised fine-tuning, teaching the model to reason from task descriptions to strategies and from strategies to executable structures. During inference, the model performs reversible reasoning to synthesize executable workflows, augmented by self-refinement for structural coherence. Extensive experiments demonstrate that our method produces workflows with richer node diversity, more coherent structures, and higher execution success rates than existing systems, establishing a new foundation for knowledge-driven, agentic workflow generation.

Large Language Model (LLM)-based multi-agent systems are increasingly powerful, but current agentic workflow optimization paradigms make an unsatisfying trade-off. Task-level methods spend substantial offline compute yet deploy only a single workflow, leaving complementary candidates unused, while query-level methods synthesize a new workflow per query at substantial inference cost. Our motivating analysis shows these paradigms are more complementary than competing: workflows discovered during offline search often solve different subsets of queries, and many queries handled by expensive query-level generation can already be solved by cheaper precomputed workflows. This suggests a different objective: rather than searching for one universally best workflow or regenerating one per instance, we should build a compact bank of reusable, complementary workflows and select among them adaptively at inference time. Doing so requires solving three coupled problems: generating complementary rather than redundant candidates, compressing them into a small deployable portfolio, and assigning each query to the right workflow under a performance-cost trade-off. To this end, we present FlowBank, a three-stage framework for portfolio-based agentic workflow optimization. Diversifying proposes DiverseFlow to steer search toward under-covered queries and produce a high-coverage candidate pool. Curating proposes CuraFlow to compress this pool into a compact portfolio with minimal redundancy. Matching casts deployment as edge-value prediction on a query-workflow bipartite graph and routes each incoming query to the portfolio member with the best predicted utility. Across five benchmarks, FlowBank achieves the highest average score among the evaluated methods while remaining cost-competitive, improving over the strongest automated and handcrafted baselines by 4.26% and 14.92% relative, respectively.

Structured LLM workflows, where specialized LLM sub-agents execute according to a predefined graph, have become a powerful abstraction for solving complex tasks. Optimizing such workflows, i.e., selecting configurations for each sub-agent to balance accuracy and latency, is challenging due to the combinatorial design space over model choices, reasoning budgets, and workflow structures. Existing cost-aware methods largely treat workflow optimization as a routing problem, selecting a configuration at inference time for each query according to the accuracy-latency objective used during training. We argue that structured LLM workflows can also be optimized from a compilation perspective: before deployment, the system can globally explore the workflow design space and construct a reusable set of workflow-level configurations spanning diverse accuracy-latency trade-offs. Drawing inspiration from machine learning compilers, we introduce FlowCompile, a structured LLM workflow compiler that performs compile-time design space exploration to identify a high-quality, reusable trade-off set. FlowCompile decomposes a workflow into sub-agents, profiles each sub-agent under diverse configurations, and composes these measurements through a structure-aware proxy to estimate workflow-level accuracy and latency. It then identifies diverse high-quality configurations in a single compile-time pass, without retraining or online adaptation. Experiments across diverse workflows and challenging benchmarks show that FlowCompile consistently outperforms heuristically optimized workflow configurations and routing-based baselines, delivering up to 6.4x speedup. The compiled configuration set further serves as a reusable optimization artifact, enabling flexible deployment under varying runtime preferences and supporting downstream selection or routing.

This paper introduces the Opus Prompt Intention Framework, designed to improve complex Workflow Generation with instruction-tuned Large Language Models (LLMs). We propose an intermediate Intention Capture layer between user queries and Workflow Generation, implementing the Opus Workflow Intention Framework, which consists of extracting Workflow Signals from user queries, interpreting them into structured Workflow Intention objects, and generating Workflows based on these Intentions. Our results show that this layer enables LLMs to produce logical and meaningful outputs that scale reliably as query complexity increases. On a synthetic benchmark of 1,000 multi-intent query-Workflow(s) pairs, applying the Opus Prompt Intention Framework to Workflow Generation yields consistent improvements in semantic Workflow similarity metrics. In this paper, we introduce the Opus Prompt Intention Framework by applying the concepts of Workflow Signal and Workflow Intention to LLM-driven Workflow Generation. We present a reproducible, customizable LLM-based Intention Capture system to extract Workflow Signals and Workflow Intentions from user queries. Finally, we provide empirical evidence that the proposed system significantly improves Workflow Generation quality compared to direct generation from user queries, particularly in cases of Mixed Intention Elicitation.

Workflows are a fundamental component of automation in enterprise platforms, enabling the orchestration of tasks, data processing, and system integrations. Despite being widely used, building workflows can be complex, often requiring manual configuration through low-code platforms or visual programming tools. To simplify this process, we explore the use of generative foundation models, particularly vision-language models (VLMs), to automatically generate structured workflows from visual inputs. Translating hand-drawn sketches or computer-generated diagrams into executable workflows is challenging due to the ambiguity of free-form drawings, variations in diagram styles, and the difficulty of inferring execution logic from visual elements. To address this, we introduce StarFlow, a framework for generating structured workflow outputs from sketches using vision-language models. We curate a diverse dataset of workflow diagrams -- including synthetic, manually annotated, and real-world samples -- to enable robust training and evaluation. We finetune and benchmark multiple vision-language models, conducting a series of ablation studies to analyze the strengths and limitations of our approach. Our results show that finetuning significantly enhances structured workflow generation, outperforming large vision-language models on this task.

Reinforcement learning (RL) agents improve through trial-and-error, but when reward is sparse and the agent cannot discover successful action sequences, learning stagnates. This has been a notable problem in training deep RL agents to perform web-based tasks, such as booking flights or replying to emails, where a single mistake can ruin the entire sequence of actions. A common remedy is to "warm-start" the agent by pre-training it to mimic expert demonstrations, but this is prone to overfitting. Instead, we propose to constrain exploration using demonstrations. From each demonstration, we induce high-level "workflows" which constrain the allowable actions at each time step to be similar to those in the demonstration (e.g., "Step 1: click on a textbox; Step 2: enter some text"). Our exploration policy then learns to identify successful workflows and samples actions that satisfy these workflows. Workflows prune out bad exploration directions and accelerate the agent's ability to discover rewards. We use our approach to train a novel neural policy designed to handle the semi-structured nature of websites, and evaluate on a suite of web tasks, including the recent World of Bits benchmark. We achieve new state-of-the-art results, and show that workflow-guided exploration improves sample efficiency over behavioral cloning by more than 100x.

Large language model (LLM)-based systems are becoming increasingly popular for solving tasks by constructing executable workflows that interleave LLM calls, information retrieval, tool use, code execution, memory updates, and verification. This survey reviews recent methods for designing and optimizing such workflows, which we treat as agentic computation graphs (ACGs). We organize the literature based on when workflow structure is determined, where structure refers to which components or agents are present, how they depend on each other, and how information flows between them. This lens distinguishes static methods, which fix a reusable workflow scaffold before deployment, from dynamic methods, which select, generate, or revise the workflow for a particular run before or during execution. We further organize prior work along three dimensions: when structure is determined, what part of the workflow is optimized, and which evaluation signals guide optimization (e.g., task metrics, verifier signals, preferences, or trace-derived feedback). We also distinguish reusable workflow templates, run-specific realized graphs, and execution traces, separating reusable design choices from the structures actually deployed in a given run and from realized runtime behavior. Finally, we outline a structure-aware evaluation perspective that complements downstream task metrics with graph-level properties, execution cost, robustness, and structural variation across inputs. Our goal is to provide a clear vocabulary, a unified framework for positioning new methods, a more comparable view of existing body of literature, and a more reproducible evaluation standard for future work in workflow optimizations for LLM agents.

This paper introduces Opus, a novel framework for generating and optimizing Workflows tailored to complex Business Process Outsourcing (BPO) use cases, focusing on cost reduction and quality enhancement while adhering to established industry processes and operational constraints. Our approach generates executable Workflows from Intention, defined as the alignment of Client Input, Client Output, and Process Context. These Workflows are represented as Directed Acyclic Graphs (DAGs), with nodes as Tasks consisting of sequences of executable Instructions, including tools and human expert reviews. We adopt a two-phase methodology: Workflow Generation and Workflow Optimization. In the Generation phase, Workflows are generated using a Large Work Model (LWM) informed by a Work Knowledge Graph (WKG) that encodes domain-specific procedural and operational knowledge. In the Optimization phase, Workflows are transformed into Workflow Graphs (WFGs), where optimal Workflows are determined through path optimization. Our experiments demonstrate that state-of-the-art Large Language Models (LLMs) face challenges in reliably retrieving detailed process data as well as generating industry-compliant workflows. The key contributions of this paper include: - The integration of a Work Knowledge Graph (WKG) into a Large Work Model (LWM), enabling the generation of context-aware, semantically aligned, structured and auditable Workflows. - A two-phase approach that combines Workflow Generation from Intention with graph-based Workflow Optimization. - Opus Alpha 1 Large and Opus Alpha 1 Small, models that outperform state-of-the-art LLMs by 38\% and 29\% respectively in Workflow Generation for a Medical Coding use case.

Automatic workflow generation is the process of automatically synthesizing sequences of LLM calls, tool invocations, and post-processing steps for complex end-to-end tasks. Most prior methods cast this task as an optimization problem with limited theoretical grounding. We propose to cast workflow generation as Bayesian inference over a posterior distribution on workflows, and introduce Bayesian Workflow Generation (BWG), a sampling framework that builds workflows step-by-step using parallel look-ahead rollouts for importance weighting and a sequential in-loop refiner for pool-wide improvements. We prove that, without the refiner, the weighted empirical distribution converges to the target posterior. We instantiate BWG as BayesFlow, a training-free algorithm for workflow construction. Across six benchmark datasets, BayesFlow improves accuracy by up to 9 percentage points over SOTA workflow generation baselines and by up to 65 percentage points over zero-shot prompting, establishing BWG as a principled upgrade to search-based workflow design. Code will be available on https://github.com/BoYuanVisionary/BayesFlow.

This paper introduces the Opus Workflow Evaluation Framework, a probabilistic-normative formulation for quantifying Workflow quality and efficiency. It integrates notions of correctness, reliability, and cost into a coherent mathematical model that enables direct comparison, scoring, and optimization of Workflows. The framework combines the Opus Workflow Reward, a probabilistic function estimating expected performance through success likelihood, resource usage, and output gain, with the Opus Workflow Normative Penalties, a set of measurable functions capturing structural and informational quality across Cohesion, Coupling, Observability, and Information Hygiene. It supports automated Workflow assessment, ranking, and optimization within modern automation systems such as Opus and can be integrated into Reinforcement Learning loops to guide Workflow discovery and refinement. In this paper, we introduce the Opus Workflow Reward model that formalizes Workflow success as a probabilistic expectation over costs and outcomes. We define measurable Opus Workflow Normative Penalties capturing structural, semantic, and signal-related properties of Workflows. Finally, we propose a unified optimization formulation for identifying and ranking optimal Workflows under joint Reward-Penalty trade-offs.

Multi-Agent Systems (MAS) built on large language models typically solve complex tasks by coordinating multiple agents through workflows. Existing approaches generates workflows either at task level or query level, but their relative costs and benefits remain unclear. After rethinking and empirical analyses, we show that query-level workflow generation is not always necessary, since a small set of top-K best task-level workflows together already covers equivalent or even more queries. We further find that exhaustive execution-based task-level evaluation is both extremely token-costly and frequently unreliable. Inspired by the idea of self-evolution and generative reward modeling, we propose a low-cost task-level generation framework SCALE, which means \textbf{S}elf prediction of the optimizer with few shot \textbf{CAL}ibration for \textbf{E}valuation instead of full validation execution. Extensive experiments demonstrate that SCALE maintains competitive performance, with an average degradation of just 0.61\% compared to existing approach across multiple datasets, while cutting overall token usage by up to 83\%.

In task-oriented dialogue, a system often needs to follow a sequence of actions, called a workflow, that complies with a set of guidelines in order to complete a task. In this paper, we propose the novel problem of multi-step workflow action prediction, in which the system predicts multiple future workflow actions. Accurate prediction of multiple steps allows for multi-turn automation, which can free up time to focus on more complex tasks. We propose three modeling approaches that are simple to implement yet lead to more action automation: 1) fine-tuning on a training dataset, 2) few-shot in-context learning leveraging retrieval and large language model prompting, and 3) zero-shot graph traversal, which aggregates historical action sequences into a graph for prediction. We show that multi-step action prediction produces features that improve accuracy on downstream dialogue tasks like predicting task success, and can increase automation of steps by 20% without requiring as much feedback from a human overseeing the system.

Large Language Models (LLMs), with their exceptional ability to handle a wide range of tasks, have driven significant advancements in tackling reasoning and planning tasks, wherein decomposing complex problems into executable workflows is a crucial step in this process. Existing workflow evaluation frameworks either focus solely on holistic performance or suffer from limitations such as restricted scenario coverage, simplistic workflow structures, and lax evaluation standards. To this end, we introduce WorFBench, a unified workflow generation benchmark with multi-faceted scenarios and intricate graph workflow structures. Additionally, we present WorFEval, a systemic evaluation protocol utilizing subsequence and subgraph matching algorithms to accurately quantify the LLM agent's workflow generation capabilities. Through comprehensive evaluations across different types of LLMs, we discover distinct gaps between the sequence planning capabilities and graph planning capabilities of LLM agents, with even GPT-4 exhibiting a gap of around 15%. We also train two open-source models and evaluate their generalization abilities on held-out tasks. Furthermore, we observe that the generated workflows can enhance downstream tasks, enabling them to achieve superior performance with less time during inference. Code and dataset will be available at https://github.com/zjunlp/WorFBench.

Tool-augmented large language models have advanced from single-turn question answering to deep research workflows that iteratively plan queries, invoke external tools, and synthesize information to address complex information needs. Evaluating such workflows presents a fundamental challenge: reliance on live APIs introduces non-determinism, as tool invocations may yield different results across runs due to temporal drift, rate limiting, and evolving backend states. This variance undermines reproducibility and invalidates cross-system comparisons. We present ScholarGym, a simulation environment for reproducible evaluation of deep research workflows on academic literature. The environment decouples workflow components into query planning, tool invocation, and relevance assessment, enabling fine-grained analysis of each stage under controlled conditions. Built on a static corpus of 570K papers with deterministic retrieval, ScholarGym provides 2,536 queries with expert-annotated ground truth. Experiments across diverse backbone models reveal how reasoning capabilities, planning strategies, and selection mechanisms interact over iterative refinement.

Agent harnesses often improve language models with human-designed workflows, but as models grow more capable, unreliable guidance can increasingly constrain their execution. We call the ability to benefit from useful guidance while overriding unreliable guidance thinking outside the box. We introduce Box^2-Bench, which holds the model and task fixed while varying workflow reliability to isolate how models regulate their reliance on guidance. On Box^2-Bench, frontier models often benefit from reliable guidance but remain vulnerable when it is misleading or becomes unreliable. To test whether this capability can be learned, we train two open-weight models using bad workflows, reserving good workflows for evaluation. We explore two complementary training strategies: counterfactual supervised fine-tuning improves robustness, while outcome-based reinforcement learning can shift the balance toward greater use of helpful workflows. We further find that this behavior extends beyond workflows to other forms of external information, improving peer correction and robustness to corrupted memory. Together, our results identify selective reliance on fallible external information as a dimension of agent reliability not captured by task performance alone.

Recent advances in LLM-based multi-agent systems (MAS) show that workflows composed of multiple LLM agents with distinct roles, tools, and communication patterns can outperform single-LLM baselines on complex tasks. However, most frameworks are homogeneous, where all agents share the same base LLM and differ only in prompts, tools, and positions in the workflow. This raises the question of whether such workflows can be simulated by a single agent through multi-turn conversations. We investigate this across seven benchmarks spanning coding, mathematics, general question answering, domain-specific reasoning, and real-world planning and tool use. Our results show that a single agent can reach the performance of homogeneous workflows with an efficiency advantage from KV cache reuse, and can even match the performance of an automatically optimized heterogeneous workflow. Building on this finding, we propose OneFlow, an algorithm that automatically tailors workflows for single-agent execution, reducing inference costs compared to existing automatic multi-agent design frameworks without trading off accuracy. These results position the single-LLM implementation of multi-agent workflows as a strong baseline for MAS research. We also note that single-LLM methods cannot capture heterogeneous workflows due to the lack of KV cache sharing across different LLMs, highlighting future opportunities in developing truly heterogeneous multi-agent systems.

The practical use of text-to-image generation has evolved from simple, monolithic models to complex workflows that combine multiple specialized components. While workflow-based approaches can lead to improved image quality, crafting effective workflows requires significant expertise, owing to the large number of available components, their complex inter-dependence, and their dependence on the generation prompt. Here, we introduce the novel task of prompt-adaptive workflow generation, where the goal is to automatically tailor a workflow to each user prompt. We propose two LLM-based approaches to tackle this task: a tuning-based method that learns from user-preference data, and a training-free method that uses the LLM to select existing flows. Both approaches lead to improved image quality when compared to monolithic models or generic, prompt-independent workflows. Our work shows that prompt-dependent flow prediction offers a new pathway to improving text-to-image generation quality, complementing existing research directions in the field.

ComfyUI provides a widely-adopted, workflow-based interface that enables users to customize various image generation tasks through an intuitive node-based architecture. However, the intricate connections between nodes and diverse modules often present a steep learning curve for users. In this paper, we introduce ComfyGPT, the first self-optimizing multi-agent system designed to generate ComfyUI workflows based on task descriptions automatically. ComfyGPT comprises four specialized agents: ReformatAgent, FlowAgent, RefineAgent, and ExecuteAgent. The core innovation of ComfyGPT lies in two key aspects. First, it focuses on generating individual node links rather than entire workflows, significantly improving generation precision. Second, we proposed FlowAgent, a LLM-based workflow generation agent that uses both supervised fine-tuning (SFT) and reinforcement learning (RL) to improve workflow generation accuracy. Moreover, we introduce FlowDataset, a large-scale dataset containing 13,571 workflow-description pairs, and FlowBench, a comprehensive benchmark for evaluating workflow generation systems. We also propose four novel evaluation metrics: Format Validation (FV), Pass Accuracy (PA), Pass Instruct Alignment (PIA), and Pass Node Diversity (PND). Experimental results demonstrate that ComfyGPT significantly outperforms existing LLM-based methods in workflow generation.

Tool-integrated reasoning (TIR) enables LLM agents to solve tasks through planning, tool use, and iterative revision, but outcome-only reinforcement learning in this setting suffers from sparse, delayed rewards and weak step-level credit assignment. In long-horizon TIR trajectories, an early irrecoverable mistake can determine success or failure, making it crucial to localize the first irrecoverable step and leverage it for fine-grained credit assignment. We propose Error-Localized Policy Optimization (ELPO), which localizes the first irrecoverable step via binary-search rollout trees under a fixed rollout budget, converts the resulting tree into stable learning signals through hierarchical advantage attribution, and applies error-localized adaptive clipping to strengthen corrective updates on the critical step and its suffix. Across TIR benchmarks in math, science QA, and code execution, ELPO consistently outperforms strong Agentic RL baselines under comparable sampling budgets, with additional gains in Pass@K and Major@K scaling, rollout ranking quality, and tool-call efficiency. Our code will be publicly released soon.

AI-generated content has evolved from monolithic models to modular workflows, particularly on platforms like ComfyUI, enabling customization in creative pipelines. However, crafting effective workflows requires great expertise to orchestrate numerous specialized components, presenting a steep learning curve for users. To address this challenge, we introduce ComfyUI-R1, the first large reasoning model for automated workflow generation. Starting with our curated dataset of 4K workflows, we construct long chain-of-thought (CoT) reasoning data, including node selection, workflow planning, and code-level workflow representation. ComfyUI-R1 is trained through a two-stage framework: (1) CoT fine-tuning for cold start, adapting models to the ComfyUI domain; (2) reinforcement learning for incentivizing reasoning capability, guided by a fine-grained rule-metric hybrid reward, ensuring format validity, structural integrity, and node-level fidelity. Experiments show that our 7B-parameter model achieves a 97\% format validity rate, along with high pass rate, node-level and graph-level F1 scores, significantly surpassing prior state-of-the-art methods that employ leading closed-source models such as GPT-4o and Claude series. Further analysis highlights the critical role of the reasoning process and the advantage of transforming workflows into code. Qualitative comparison reveals our strength in synthesizing intricate workflows with diverse nodes, underscoring the potential of long CoT reasoning in AI art creation.

Co-work agents execute complex workflows that combine information gathering, tool use, coding, and file manipulation across many model invocations. Because cost and latency accumulate over the full episode, their practical value depends not only on peak capability but also on how efficiently that capability is delivered. Yet many steps in everyday work emphasize state tracking, coordination, recovery, and follow-through rather than frontier-scale reasoning. We present Occamy-1.0, a cost-efficient co-work model obtained by further training the post-trained Qwen3.6-35B-A3B checkpoint. We construct execution-grounded data and environments, capture replayable long-horizon trajectories across multiple harnesses, and use staged post-training to develop and consolidate complementary execution capabilities. Across a broad suite of co-work benchmarks, Occamy-1.0 is consistently among the strongest comparably sized models and remains competitive with substantially larger frontier systems on several tasks. Under our stated evaluation and pricing protocol, its aggregate performance across four representative benchmarks places it at the low-cost knee of the observed cost--performance Pareto frontier. Supporting evaluations in tool calling, coding, and instruction following further show that this specialization preserves broad agentic capability. We release the model weights and a subset of the training data to support research on practical co-work agents and agentic post-training.

Long-horizon workflow agents that operate effectively over extended periods are essential for truly autonomous systems. Their reliable execution critically depends on the ability to reason through ambiguous situations in which clarification seeking is necessary to ensure correct task execution. However, progress is limited by the lack of scalable, task-agnostic frameworks for systematically curating and measuring the impact of ambiguity across custom workflows. We address this gap by introducing LHAW (Long-Horizon Augmented Workflows), a modular, dataset-agnostic synthetic pipeline that transforms any well-specified task into controllable underspecified variants by systematically removing information across four dimensions - Goals, Constraints, Inputs, and Context - at configurable severity levels. Unlike approaches that rely on LLM predictions of ambiguity, LHAW validates variants through empirical agent trials, classifying them as outcome-critical, divergent, or benign based on observed terminal state divergence. We release 285 task variants from TheAgentCompany, SWE-Bench Pro and MCP-Atlas according to our taxonomy alongside formal analysis measuring how current agents detect, reason about, and resolve underspecification across ambiguous settings. LHAW provides the first systematic framework for cost-sensitive evaluation of agent clarification behavior in long-horizon settings, enabling development of reliable autonomous systems.

Multi-agent frameworks powered by large language models (LLMs) have demonstrated great success in automated planning and task execution. However, the effective adjustment of Agentic workflows during execution has not been well-studied. A effective workflow adjustment is crucial, as in many real-world scenarios, the initial plan must adjust to unforeseen challenges and changing conditions in real-time to ensure the efficient execution of complex tasks. In this paper, we define workflows as an activity-on-vertex (AOV) graphs. We continuously refine the workflow by dynamically adjusting task allocations based on historical performance and previous AOV with LLM agents. To further enhance system performance, we emphasize modularity in workflow design based on measuring parallelism and dependence complexity. Our proposed multi-agent framework achieved efficient sub-task concurrent execution, goal achievement, and error tolerance. Empirical results across different practical tasks demonstrate dramatic improvements in the efficiency of multi-agent frameworks through dynamic workflow updating and modularization.

Augmenting large language models (LLMs) with external tools has emerged as a promising approach to extend their utility, empowering them to solve practical tasks. Existing work typically empowers LLMs as tool users with a manually designed workflow, where the LLM plans a series of tools in a step-by-step manner, and sequentially executes each tool to obtain intermediate results until deriving the final answer. However, they suffer from two challenges in realistic scenarios: (1) The handcrafted control flow is often ad-hoc and constraints the LLM to local planning; (2) The LLM is instructed to use only manually demonstrated tools or well-trained Python functions, which limits its generalization to new tools. In this work, we first propose Automatic Tool Chain (ATC), a framework that enables the LLM to act as a multi-tool user, which directly utilizes a chain of tools through programming. To scale up the scope of the tools, we next propose a black-box probing method. This further empowers the LLM as a tool learner that can actively discover and document tool usages, teaching themselves to properly master new tools. For a comprehensive evaluation, we build a challenging benchmark named ToolFlow, which diverges from previous benchmarks by its long-term planning scenarios and complex toolset. Experiments on both existing datasets and ToolFlow illustrate the superiority of our framework. Analysis on different settings also validates the effectiveness and the utility of our black-box probing algorithm.

The automated generation of agentic workflows is a promising frontier for enabling large language models (LLMs) to solve complex tasks. However, our investigation reveals that the robustness of agentic workflow remains a critical, unaddressed challenge. Current methods often generate wildly inconsistent workflows when provided with instructions that are semantically identical but differently phrased. This brittleness severely undermines their reliability and trustworthiness for real-world applications. To quantitatively diagnose this instability, we propose metrics based on nodal and topological similarity to evaluate workflow consistency against common semantic variations such as paraphrasing and noise injection. Subsequently, we further propose a novel training framework, RobustFlow, that leverages preference optimization to teach models invariance to instruction variations. By training on sets of synonymous task descriptions, RobustFlow boosts workflow robustness scores to 70\% - 90\%, which is a substantial improvement over existing approaches. The code is publicly available at https://github.com/DEFENSE-SEU/RobustFlow.

Scientific literature search often requires more than retrieving papers from a single query: users' intents are underspecified, preference-dependent, and evolve through interaction. Existing search agents typically rely on fixed pipelines or implicit language-only reasoning, making their search strategies difficult to control, inspect, and refine. We introduce PaperPilot, a multi-turn literature search agent that frames scientific search as workflow induction. Given an anchor paper and a user query, PaperPilot constructs an executable DAG of paper-search operators, including keyword search, citation expansion, filtering, scoring, reranking, and evidence extraction. User feedback is then used to refine both the query and the workflow itself. We train PaperPilot with supervised workflow imitation and preference optimization over controlled workflow corruptions. Experiments show that PaperPilot-9B improves over the base Qwen3.5-9B toolset agent under multi-turn interaction, increasing Hit@5 from 58.0 to 77.0, MRR from 47.5 to 59.4, and nDCG@10 from 26.8 to 32.5, while reducing workflow execution errors from 9.5% to 0%. These results show that explicit, editable search workflows provide an effective and controllable interface for aligning literature search agents with complex scientific intent.

Terminal agents are increasingly deployed beyond software engineering in science and other specialized domains. Constructing training environments requires executable reference behavior and a domain-specific verifier that distinguishes semantic correctness from superficially plausible artifacts. Authoring these components for each task requires repeated engineering and limits reuse. We introduce software-in-the-loop reconstruction, a self-supervised framework that obtains reference outputs and verification targets from existing software workflows, executable programs mapping structured inputs to outputs. For each workflow, we execute multiple input configurations and partition cases into public observations and hidden evaluations. Given the instruction, input schema, and public input--output observations, an agent constructs an editable program without access to the source workflow. The candidate is evaluated on hidden configurations against workflow outputs. A hierarchical verifier combines domain-specific semantic comparison, structural validity, and anti-shortcut checks, while public feedback supports iterative revision. The construction admits additional workflows and configurations without authoring a reference solution for each task. We instantiate SWR with 500 workflows and 46 software families across six domains. Across three attempts per task, Qwen3.8-Max solves 838 tasks and produces 1,422 verified trajectories, which we oversample to 3,000 reconstruction-only training examples. Supervised fine-tuning of Qwen3.8-27B improves mean Terminal-Bench 2 performance from 47.94% to 53.56% across three seeds and achieves the highest mean among four matched-token corpus controls on all four reported evaluations. These results indicate that existing scientific software can provide scalable, behaviorally verified supervision for terminal agents.

Large language model (LLM)-based agents are widely deployed in user-facing services but remain error-prone in new tasks, tend to repeat the same failure patterns, and show substantial run-to-run variability. Fixing failures via environment-specific training or manual patching is costly and hard to scale. To enable self-evolving agents in user-facing service environments, we propose WISE-Flow, a workflow-centric framework that converts historical service interactions into reusable procedural experience by inducing workflows with prerequisite-augmented action blocks. At deployment, WISE-Flow aligns the agent's execution trajectory to retrieved workflows and performs prerequisite-aware feasibility reasoning to achieve state-grounded next actions. Experiments on ToolSandbox and τ^2-bench show consistent improvement across base models.

We introduce a finance & accounting benchmark (Finch) for evaluating AI agents on real-world, enterprise-grade professional workflows -- interleaving data entry, structuring, formatting, web search, cross-file retrieval, calculation, modeling, validation, translation, visualization, and reporting. Finch is sourced from authentic enterprise workspaces at Enron (15,000 spreadsheets and 500,000 emails from 150 employees) and other financial institutions, preserving in-the-wild messiness across multimodal artifacts (text, tables, formulas, charts, code, and images) and spanning diverse domains such as budgeting, trading, and asset management. We propose a workflow construction process that combines LLM-assisted discovery with expert annotation: (1) LLM-assisted, expert-verified derivation of workflows from real-world email threads and version histories of spreadsheet files, and (2) meticulous expert annotation for workflows, requiring over 700 hours of domain-expert effort. This yields 172 composite workflows with 384 tasks, involving 1,710 spreadsheets with 27 million cells, along with PDFs and other artifacts, capturing the intrinsically messy, long-horizon, knowledge-intensive, and collaborative nature of real-world enterprise work. We conduct both human and automated evaluations of frontier AI systems including GPT 5.1, Claude Sonnet 4.5, Gemini 3 Pro, Grok 4, and Qwen 3 Max, and GPT 5.1 Pro spends 16.8 minutes per workflow yet passes only 38.4% of workflows, while Claude Sonnet 4.5 passes just 25.0%. Comprehensive case studies further surface the challenges that real-world enterprise workflows pose for AI agents.

LLM-based agents have emerged as promising tools, which are crafted to fulfill complex tasks by iterative planning and action. However, these agents are susceptible to undesired planning hallucinations when lacking specific knowledge for expertise-intensive tasks. To address this, preliminary attempts are made to enhance planning reliability by incorporating external workflow-related knowledge. Despite the promise, such infused knowledge is mostly disorganized and diverse in formats, lacking rigorous formalization and comprehensive comparisons. Motivated by this, we formalize different formats of workflow knowledge and present FlowBench, the first benchmark for workflow-guided planning. FlowBench covers 51 different scenarios from 6 domains, with knowledge presented in diverse formats. To assess different LLMs on FlowBench, we design a multi-tiered evaluation framework. We evaluate the efficacy of workflow knowledge across multiple formats, and the results indicate that current LLM agents need considerable improvements for satisfactory planning. We hope that our challenging benchmark can pave the way for future agent planning research.

Agentic systems increasingly solve complex user requests by executing orchestrated workflows, where subtasks are assigned to specialized models or tools and coordinated according to their dependencies. While recent work improves agent efficiency by optimizing the performance--cost--latency frontier, real deployments often impose concrete requirements: a workflow must be completed within a specified budget and before a specified deadline. This shifts the goal from average efficiency optimization to maximizing the probability that the entire workflow completes successfully under explicit budget and deadline constraints. We study constraint-driven online resource allocation for agentic workflows. Given a dependency-structured workflow and estimates of success rates and generation lengths for each subtask--model pair, the executor allocates models and parallel samples across simultaneously executable subtasks while managing the remaining budget and time. We formulate this setting as a finite-horizon stochastic online allocation problem and propose Monte Carlo Portfolio Planning (MCPP), a lightweight closed-loop planner that directly estimates constrained completion probability through simulated workflow executions and replans after observed outcomes. Experiments on CodeFlow and ProofFlow demonstrate that MCPP consistently improves constrained completion probability over strong baselines across a wide range of budget--deadline constraints.

LLM-based multi-agent systems decompose complex tasks into interacting roles, but most remain manually orchestrated by prompts, tools, and control rules, while agents are rarely optimized through a unified reinforcement learning interface. Existing RL post-training frameworks mainly target single-policy optimization and lack abstractions for user-defined multi-agent workflows, structured interaction, role-specific credit assignment, and configurable parameter sharing. We present UnityMAS-O, a general RL optimization framework for LLM-based multi-agent systems. UnityMAS-O treats the complete workflow as the optimization unit, rather than a single response or policy trajectory. It represents workflows through four first-class objects: logical agent roles, graph trajectories, user-defined rewards, and agent--model mappings. This decouples logical agents from physical model parameters, supporting full sharing, full separation, and partial sharing, with rewards assigned at role, turn, and trajectory levels. UnityMAS-O extends verl with a Ray-based star-topology runtime. A central controller executes workflows, invokes tools, records structured trajectories, and assembles rewards; model-local worker groups handle rollout, buffering, advantage computation, and distributed PPO-style updates. Users can define agents, workflows, model mappings, and rewards without rewriting the optimization infrastructure. We instantiate UnityMAS-O on retrieval-augmented QA, iterative agentic search, and reflective code generation. Across Natural Questions, HotpotQA, and held-out code tasks, multi-agent RL improves manually specified workflows after optimization, with especially large gains for smaller models and strict code all-passed metrics. These results show that UnityMAS-O can serve as a reusable substrate for converting diverse LLM-based multi-agent workflows into trainable multi-agent RL systems.

As modern microservice systems grow increasingly popular and complex-often consisting of hundreds or even thousands of fine-grained, interdependent components-they are becoming more susceptible to frequent and subtle failures. Ensuring system reliability therefore hinges on accurate and efficient failure localization. Traditional failure localization approaches based on small models lack the flexibility to adapt to diverse failure scenarios, while recent LLM-based methods suffer from two major limitations: they often rely on rigid invocation workflows that constrain the model's ability to dynamically explore optimal localization paths, and they require resource-intensive inference, making them cost-prohibitive for real-world deployment. To address these challenges, we explore the use of reinforcement fine-tuning to equip lightweight LLMs with reasoning and self-refinement capabilities, significantly improving the cost-effectiveness and adaptability of LLM-based failure localization. We begin with an empirical study to identify three key capabilities essential for accurate localization. Building on these insights, we propose a progressive multi-stage GRPO fine-tuning framework, which integrates a multi-factor failure localization grader and a recursion-of-thought actor module. The resulting model, ThinkFL, not only outperforms existing state-of-the-art LLMs and baseline methods in localization accuracy but also reduces end-to-end localization latency from minutes to seconds, demonstrating strong potential for real-world applications.

Automating real-world software engineering tasks remains challenging for large language model (LLM)-based agents due to the need for long-horizon reasoning over large, evolving codebases and making consistent decisions across interdependent actions. Existing approaches typically rely on static prompting strategies or handcrafted heuristics to select actions such as code editing, file navigation, and test execution, but they lack fine-grained feedback on intermediate decisions. This leads to inefficient exploration, error propagation, and brittle solution trajectories. To address this limitation, we propose SWE-Shepherd, a framework that introduces Process Reward Models (PRMs) to provide dense, step-level supervision for repository-level code agents. Using trajectories from SWE-Bench, we construct an action-level reward dataset and train a lightweight reward model on a base LLM to estimate the usefulness of intermediate actions. During inference, the PRM evaluates candidate actions and guides the agent toward higher-reward decisions without requiring full reinforcement learning. Experiments on SWE-Bench Verified demonstrate improved interaction efficiency and action quality, while also highlighting challenges in aligning intermediate rewards with final task success.

Compact language models (LMs) reduce cost, latency, and deployment risk for tool agents. Yet MCP-style tool use requires more than isolated function calling: an agent must discover tools from live catalogs, satisfy schemas, preserve dependencies across intermediate outputs, and ground final responses in executed evidence. Small planners often generate plausible workflow graphs that fail under tool resolution, parameter validation, dependency tracking, or execution. We argue that this failure mode is poorly handled by small-corpus distillation. A few hundred teacher traces can teach workflow format, but rarely cover the recovery behavior needed to repair failed plans over changing tool catalogs. We introduce Evoflux, an inference-time evolutionary search method that treats compact tool use as the repair of executable tool workflows. It evolves typed workflow graphs through structured edits, execution feedback, adaptive intensity, meta-guided redesign, and diversity pruning. On held-out MCP-Bench tasks spanning live MCP servers and 250 tools, Evoflux raises execution feasibility from roughly 3% to 17-24% across small planners. In contrast, SFT and SFT+DPO on the same search-mined data match, underperform, or collapse below zero-shot performance; ReAct reaches higher peaks, but with higher variance and token cost. These results show that execution-grounded search is more reliable under scarce teacher-trace budgets.

This paper introduces Workflow Intention, a novel framework for identifying and encoding process objectives within complex business environments. Workflow Intention is the alignment of Input, Process and Output elements defining a Workflow's transformation objective interpreted from Workflow Signal inside Business Artefacts. It specifies how Input is processed to achieve desired Output, incorporating quality standards, business rules, compliance requirements and constraints. We adopt an end-to-end Business Artefact Encoder and Workflow Signal interpretation methodology involving four steps: Modality-Specific Encoding, Intra-Modality Attention, Inter-Modality Fusion Attention then Intention Decoding. We provide training procedures and critical loss function definitions. In this paper we introduce the concepts of Workflow Signal and Workflow Intention, where Workflow Signal decomposed into Input, Process and Output elements is interpreted from Business Artefacts, and Workflow Intention is a complete triple of these elements. We introduce a mathematical framework for representing Workflow Signal as a vector and Workflow Intention as a tensor, formalizing properties of these objects. Finally, we propose a modular, scalable, trainable, attention-based multimodal generative system to resolve Workflow Intention from Business Artefacts.

Agentic workflows -- where multiple large language model (LLM) instances interact to solve tasks -- are increasingly built on feedback mechanisms, where one model evaluates and critiques another. Despite the promise of feedback-driven improvement, the stability of agentic workflows rests on the reliability of the judge. However, judges may hallucinate information, exhibit bias, or act adversarially -- introducing critical vulnerabilities into the workflow. In this work, we present a systematic analysis of agentic workflows under deceptive or misleading feedback. We introduce a two-dimensional framework for analyzing judge behavior, along axes of intent (from constructive to malicious) and knowledge (from parametric-only to retrieval-augmented systems). Using this taxonomy, we construct a suite of judge behaviors and develop WAFER-QA, a new benchmark with critiques grounded in retrieved web evidence to evaluate robustness of agentic workflows against factually supported adversarial feedback. We reveal that even strongest agents are vulnerable to persuasive yet flawed critiques -- often switching correct answers after a single round of misleading feedback. Taking a step further, we study how model predictions evolve over multiple rounds of interaction, revealing distinct behavioral patterns between reasoning and non-reasoning models. Our findings highlight fundamental vulnerabilities in feedback-based workflows and offer guidance for building more robust agentic systems.

Scientific workflow management systems (WMS) support scalable and reproducible execution of complex pipelines, but workflow design, implementation, and debugging remain largely manual and require significant expertise. Recent approaches using large language models (LLMs) show promise for workflow generation from natural language, but often rely on direct code synthesis, which limits transparency, reproducibility, and integration with workflow systems. We present an AI-assisted approach to scientific workflow management that combines specification-driven workflow generation, automated debugging, and distributed execution. The method introduces a structured specification phase that separates workflow intent, design, and implementation, allowing validation prior to code generation. We also develop an LLM-based debugging agent that diagnoses and resolves failures across multiple system layers. To support distributed execution and user interaction, we integrate Pegasus, a widely used WMS, with a Model Context Protocol (MCP) layer, providing a unified interface for workflow submission, monitoring, and control. We evaluate the approach using a federated learning workflow for medical imaging, chosen for its parallel, iterative, and dependency-intensive structure. The system generated and executed large-scale workflows with thousands of jobs, reduced debugging effort, and allowed non-expert users to construct workflows with expert-level design patterns. These results indicate that end-to-end AI-assisted workflow generation and execution is feasible, and point toward AI-driven platforms for managing the scientific workflow lifecycle.

Agentic frameworks powered by Large Language Models (LLMs) can be useful tools in scientific workflows by enabling human-AI co-creation. A key challenge is recommending the next steps during workflow creation without relying solely on LLMs, which risk hallucination and require fine-tuning with scarce proprietary data. We propose an episodic memory architecture that stores and retrieves past workflows to guide agents in suggesting plausible next tasks. By matching current workflows with historical sequences, agents can recommend steps based on prior patterns.

Despite the potential of language model-based agents to solve real-world tasks such as web navigation, current methods still struggle with long-horizon tasks with complex action trajectories. In contrast, humans can flexibly solve complex tasks by learning reusable task workflows from past experiences and using them to guide future actions. To build agents that can similarly benefit from this process, we introduce Agent Workflow Memory (AWM), a method for inducing commonly reused routines, i.e., workflows, and selectively providing workflows to the agent to guide subsequent generations. AWM flexibly applies to both offline and online scenarios, where agents induce workflows from training examples beforehand or from test queries on the fly. We experiment on two major web navigation benchmarks -- Mind2Web and WebArena -- that collectively cover 1000+ tasks from 200+ domains across travel, shopping, and social media, among others. AWM substantially improves the baseline results by 24.6% and 51.1% relative success rate on Mind2Web and WebArena while reducing the number of steps taken to solve WebArena tasks successfully. Furthermore, online AWM robustly generalizes in cross-task, website, and domain evaluations, surpassing baselines from 8.9 to 14.0 absolute points as train-test task distribution gaps widen.

The evolution of Retrieval-Augmented Generation (RAG) has shifted from static retrieval pipelines to dynamic, agentic workflows where a central planner orchestrates multi-turn reasoning. However, existing paradigms face a critical dichotomy: they either optimize modules jointly within rigid, fixed-graph architectures, or empower dynamic planning while treating executors as frozen, black-box tools. We identify that this decoupled optimization creates a ``strategic-operational mismatch,'' where sophisticated planning strategies fail to materialize due to unadapted local executors, often leading to negative performance gains despite increased system complexity. In this paper, we propose JADE (Joint Agentic Dynamic Execution), a unified framework for the joint optimization of planning and execution within dynamic, multi-turn workflows. By modeling the system as a cooperative multi-agent team unified under a single shared backbone, JADE enables end-to-end learning driven by outcome-based rewards. This approach facilitates co-adaptation: the planner learns to operate within the capability boundaries of the executors, while the executors evolve to align with high-level strategic intent. Empirical results demonstrate that JADE transforms disjoint modules into a synergistic system, yielding remarkable performance improvements via joint optimization and enabling a flexible balance between efficiency and effectiveness through dynamic workflow orchestration.

Recent years have witnessed the rapid evolution of AI agents toward handling increasingly complex, real-world tasks. However, existing benchmarks rarely evaluate whether agents can operate graphical user interfaces to complete long-horizon, high-value professional workflows across diverse domains. Current GUI benchmarks still predominantly focus on general-purpose software, relatively simple applications, and short-horizon tasks, leaving it largely unknown whether modern agents can follow user instructions to autonomously operate domain-specific professional software and accomplish economically valuable work in an end-to-end manner. To bridge this gap, we introduce Workflow-GYM, a benchmark for long-horizon GUI tasks centered on professional domains and specialized software environments. Through extensive experiments on state-of-the-art models, we find that even the strongest models achieve only slightly above 30% success rates, highlighting that professional long-horizon GUI workflows remain highly challenging for current GUI agents. Further analysis reveals that current agents struggle to maintain long-horizon workflow consistency, frequently exhibiting workflow stage omission, error propagation, objective drift, and insufficient understanding of professional software environments. Our findings provide important insights into the limitations of current agent systems and suggest key directions for the next generation of GUI-agent research.

Context adaptation automates prompt engineering in LLM-based systems by iteratively revising tunable prompts from task feedback, without modifying model weights. Extending this paradigm to multi-LLM agentic systems is crucial: existing methods suffer from inaccurate credit assignment and lack convergence guarantees. We propose Graph-based Target Back-Propagation (GTBP), a context adaptation framework for agentic workflows modeled as directed acyclic graphs. GTBP propagates local target outputs backward through the workflow graph and uses target--output discrepancies to guide a stage-wise prompt update mechanism. Theoretically, we show that GTBP's stage-wise prompt updates become stable over iterations, and that a sufficiently capable LLM optimizer can decrease the overall objective. Empirically, GTBP consistently outperforms strong baselines across three benchmarks while maintaining comparable computational cost.

Much previous AI research has focused on developing monolithic models to maximize their intelligence and capability, with the primary goal of enhancing performance on specific tasks. In contrast, this paper explores an alternative approach: collaborative AI systems that use workflows to integrate models, data sources, and pipelines to solve complex and diverse tasks. We introduce GenAgent, an LLM-based framework that automatically generates complex workflows, offering greater flexibility and scalability compared to monolithic models. The core innovation of GenAgent lies in representing workflows with code, alongside constructing workflows with collaborative agents in a step-by-step manner. We implement GenAgent on the ComfyUI platform and propose a new benchmark, OpenComfy. The results demonstrate that GenAgent outperforms baseline approaches in both run-level and task-level evaluations, showing its capability to generate complex workflows with superior effectiveness and stability.

Critical peer review of scientific manuscripts presents a significant challenge for Large Language Models (LLMs), partly due to data limitations and the complexity of expert reasoning. This report introduces Persistent Workflow Prompting (PWP), a potentially broadly applicable prompt engineering methodology designed to bridge this gap using standard LLM chat interfaces (zero-code, no APIs). We present a proof-of-concept PWP prompt for the critical analysis of experimental chemistry manuscripts, featuring a hierarchical, modular architecture (structured via Markdown) that defines detailed analysis workflows. We develop this PWP prompt through iterative application of meta-prompting techniques and meta-reasoning aimed at systematically codifying expert review workflows, including tacit knowledge. Submitted once at the start of a session, this PWP prompt equips the LLM with persistent workflows triggered by subsequent queries, guiding modern reasoning LLMs through systematic, multimodal evaluations. Demonstrations show the PWP-guided LLM identifying major methodological flaws in a test case while mitigating LLM input bias and performing complex tasks, including distinguishing claims from evidence, integrating text/photo/figure analysis to infer parameters, executing quantitative feasibility checks, comparing estimates against claims, and assessing a priori plausibility. To ensure transparency and facilitate replication, we provide full prompts, detailed demonstration analyses, and logs of interactive chats as supplementary resources. Beyond the specific application, this work offers insights into the meta-development process itself, highlighting the potential of PWP, informed by detailed workflow formalization, to enable sophisticated analysis using readily available LLMs for complex scientific tasks.

Large language model (LLM) agents have shown strong performance in long-horizon tasks that require planning, tool use, and interaction with external environments. However, most existing benchmarks implicitly assume a monolingual setting, where the entire execution process, including reasoning, tool invocation, and output generation, is conducted within a single language. In contrast, real-world applications often involve multilingual inputs and outputs within a unified workflow, yet the interaction between multilinguality and agentic execution remains underexplored. In this work, we introduce PolyWorkBench, a benchmark for evaluating LLM agents on multilingual long-horizon workplace workflows. PolyWorkBench consists of 67 tasks across five domains, including commerce, knowledge work, legal analysis, localization, and manufacturing, where agents must process heterogeneous multilingual inputs, perform iterative reasoning, invoke external tools, and produce structured outputs. To enable comprehensive evaluation, we propose a hybrid framework that combines structural grading, executable verification, and LLM-based semantic assessment. This design allows us to capture both functional correctness and linguistic consistency across complex workflows. Empirical results show that state-of-the-art LLM agents suffer significant performance degradation in multilingual workflow settings compared to monolingual counterparts. Our analysis suggests that multilinguality introduces compounding effects across reasoning and execution steps, highlighting the importance of jointly modeling language variation and procedural decision-making in agent evaluation.

LLM agents are expected to complete end-to-end units of work across software tools, business services, and local workspaces. Yet many agent benchmarks freeze a curated task set at release time and grade mainly the final response, making it difficult to evaluate agents against evolving workflow demand or verify whether a task was executed. We introduce Claw-Eval-Live, a live benchmark for workflow agents that separates a refreshable signal layer, updated across releases from public workflow-demand signals, from a reproducible, time-stamped release snapshot. Each release is constructed from public workflow-demand signals, with ClawHub Top-500 skills used in the current release, and materialized as controlled tasks with fixed fixtures, services, workspaces, and graders. For grading, Claw-Eval-Live records execution traces, audit logs, service state, and post-run workspace artifacts, using deterministic checks when evidence is sufficient and structured LLM judging only for semantic dimensions. The release contains 105 tasks spanning controlled business services and local workspace repair, and evaluates 13 frontier models under a shared public pass rule. Experiments reveal that reliable workflow automation remains far from solved: the leading model passes only 66.7% of tasks and no model reaches 70%. Failures are structured by task family and execution surface, with HR, management, and multi-system business workflows as persistent bottlenecks and local workspace repair comparatively easier but unsaturated. Leaderboard rank alone is insufficient because models with similar pass rates can diverge in overall completion, and task-level discrimination concentrates in a middle band of tasks. Claw-Eval-Live suggests that workflow-agent evaluation should be grounded twice, in fresh external demand and in verifiable agent action.

Large language models (LLMs) increasingly construct multi-agent workflows that decompose a complex task and assign specialist agents from a pool. However, building such a workflow well remains challenging: how finely to divide the task, which agent to trust with each subtask, and when to create a new specialist are all critical decisions a workflow constructor needs to settle up front. Thus, whether each subtask succeeds remains unknown until the workflow runs. Yet, improving a workflow is costly. Locating a fault usually requires a reference answer, a graded outcome, or a trained assessor, and the fix is applied to the whole workflow through re-execution, re-search, or retraining. We propose InFlowOp, which prices every decision in one label-free cost that weighs how well an agent's competence meets what a subtask demands against how much that agent takes to run. Before execution, InFlowOp bidirectionally determines the granularity of task decomposition and agent assignment following from the cost rather than from a fixed template. During execution, InFlowOp corrects a fault with the cheapest move via the same cost that serves the workflow both as it is built and as it runs. Facing the workflow-level evaluation challenge, we introduce Braid, a benchmark whose tasks require multi-agent coordination beyond single-agent capability. Across various domains and backbones, InFlowOp outperforms single agent baselines by up to +11.97%, achieving +9.64% with in-flow optimization. Our project page: https://xhguo7.github.io/InFlowOp/.

Tackling complex real-world tasks can exceed the capabilities of a single large language model (LLM), motivating the use of multi-agent workflows that coordinate specialized agents to work together on these tasks. Recent methods train LLMs to construct better workflows from execution outcomes, but they optimize only the workflow generator, while the other agents that build or execute each workflow remain fixed even though every outcome depends on all of them. However, extending training beyond the generator is challenging: the agents are coupled, and a workflow's outcome is a single sparse score that cannot tell which agent causes a failure. We propose FloWright, which leverages the workflow as a harness to optimize workflows. By introducing a hierarchical, structure-aware reward paradigm, FloWright enables one role to self-evolve and two or more roles to co-evolve, with no additional models, labels, or executions. Considering the limitation that workflows are commonly trained and evaluated on data that a single agent can already handle, we further propose DataWright, an adaptive data hardening approach that converts existing datasets into workflow-level tasks with increased difficulty. Across document, slide, chart, code, math, and finance tasks, small open models trained with FloWright achieve improved performance by up to +7.41%, with co-evolving (+5.03%) more roles gaining more than optimizing one of them alone (+2.83%). Our project page: https://xhguo7.github.io/FloWright/.

Agentic workflows, where multiple AI agents collaborate to accomplish complex tasks like reasoning or planning, are becoming increasingly prevalent. However, these workflows often suffer from error propagation and sub-optimal performance, largely due to poorly designed prompts that fail to effectively guide individual agents. This is a critical problem because it limits the reliability and scalability of these powerful systems. We introduce ProRefine, an innovative inference-time prompt optimization method that leverages textual feedback from large language models (LLMs) to address this challenge. ProRefine dynamically refines prompts for multi-step reasoning tasks without additional training or ground truth labels. Evaluated on five benchmark mathematical reasoning datasets, ProRefine significantly surpasses zero-shot Chain-of-Thought baselines by 3 to 37 percentage points. This approach not only boosts accuracy but also allows smaller models to match the performance of larger ones, highlighting its potential for efficient and scalable AI deployment, and democratizing access to high-performing AI.

As large language models (LLMs) evolve into autonomous agents that execute long-horizon workflows, invoking a high-capability model at every step becomes economically unsustainable. While model routing is effective for single-turn queries, agentic routing is a sequential, path-dependent problem: early mistakes compound, feedback is often at the end of the episode, and deployments often demand strict per-task spending limits. We propose Budget-Aware Agentic Routing, which selects between a cheap and an expensive model at each step to optimize the cost--success frontier and to operate under strict per-task budgets. We propose Boundary-Guided Training, which leverages two boundary policies (always-small vs.\ always-large) to build a difficulty taxonomy and to anchor learning under sparse rewards. Our approach warms start with boundary-guided SFT data synthesis via stratified sampling of cost-efficient trajectories, then applies Boundary-Guided Policy Optimization (BoPO), combining boundary-relative rewards with a reference-guided advantage to avoid degenerate cheap-failure solutions. Experiment results show that our method improves the efficiency frontier, matching strong routing baselines at substantially lower cost while demonstrating generalization to strict inference-time budget constraints. Overall, our work establishes a foundational framework for agentic routing, shifting the paradigm from static model selection to dynamic, budget-aware sequential decision-making.

Agentic systems operating over large tool ecosystems must plan and execute long-horizon workflows under weak or non-verifiable supervision. While frontier models mitigate these challenges through scale and large context budgets, small language models (SLMs) remain brittle: eager tool loading saturates context, execution errors compound over time, and sparse rewards limit learning. We introduce ATLAS, a reinforcement finetuning framework that enables SLMs to operate effectively in large-scale toolspace environments by learning how to acquire context and how to execute actions. Our approach makes two key contributions. First, we treat context control and execution structure as learnable decisions, combining iterative tool loading with programmatic tool orchestration to bound context growth and stabilize long-horizon trajectories. Second, we propose rubric-based reinforcement finetuning, which decomposes task success into structured, task-aligned criteria and enables scalable training using small judge models. Across MCP benchmarks, these design choices yield large and consistent gains over generic RL baselines, allowing a 4B SLM to approach frontier-agent performance under far tighter parameter and context budgets.

Tool-calling agents are increasingly deployed in real-world customer-facing workflows. Yet most studies on tool-calling agents focus on idealized settings with general, fixed, and well-specified tasks. In real-world applications, user requests are often (1) ambiguous, (2) changing over time, or (3) infeasible due to policy constraints, and training and evaluation data that cover these diverse, complex interaction patterns remain under-represented. To bridge the gap, we present Trajectory2Task, a verifiable data generation pipeline for studying tool use at scale under three realistic user scenarios: ambiguous intent, changing intent, and infeasible intents. The pipeline first conducts multi-turn exploration to produce valid tool-call trajectories. It then converts these trajectories into user-facing tasks with controlled intent adaptations. This process yields verifiable task that support closed-loop evaluation and training. We benchmark seven state-of-the-art LLMs on the generated complex user scenario tasks and observe frequent failures. Finally, using successful trajectories obtained from task rollouts, we fine-tune lightweight LLMs and find consistent improvements across all three conditions, along with better generalization to unseen tool-use domains, indicating stronger general tool-calling ability.

Recently, large language models (LLMs) have shown great promise in time series forecasting. However, most existing LLM-based forecasting methods still follow a static generative paradigm that directly maps historical observations to future values in a single pass. Under this paradigm, forecasting is constrained by limited temporal pattern extraction, single-round acquisition of contextual features, one-shot forecast generation, and lack of support from ensemble forecasts. To address these limitations, in this work, we propose CastFlow, a dynamic agentic forecasting framework that enables multi-view temporal pattern extraction, multi-round contextual features acquisition, iterative forecast refinement, and forecasting with ensemble forecasts. First, CastFlow organizes the forecasting process into planning, action, forecasting, and reflection, establishing an agentic workflow. Second, this workflow is supported by a memory module that retrieves prior experience and a multi-view toolkit that constructs diagnostic evidence and provides a reliable ensemble forecast baseline. Third, CastFlow adopts a role-specialized design that combines general-purpose reasoning with specialized numerical forecasting. Under this design, a frozen LLM preserves general-purpose reasoning, while a fine-tuned domain-specific LLM performs evidence-guided numerical forecasting based on the ensemble forecast baseline, rather than from scratch. To optimize a fine-tuned domain-specific LLM, we further develop a two-stage workflow-oriented training that combines supervised fine-tuning (SFT) and reinforcement learning with verifiable rewards (RLVR). To evaluate the effectiveness of CastFlow, we conduct extensive experiments on diverse datasets and show that it achieves superior overall results against strong baselines. We hope that this work can serve as a step toward more adaptive and accurate time series forecasting.

Recent advancements in Large Language Models (LLMs) have shown significant progress in understanding complex natural language. One important application of LLM is LLM-based AI Agent, which leverages the ability of LLM as well as external tools for complex-task solving. To make sure LLM Agents follow an effective and reliable procedure to solve the given task, manually designed workflows are usually used to guide the working mechanism of agents. However, manually designing the workflows requires considerable efforts and domain knowledge, making it difficult to develop and deploy agents on massive scales. To address these issues, we propose AutoFlow, a framework designed to automatically generate workflows for agents to solve complex tasks. AutoFlow takes natural language program as the format of agent workflow and employs a workflow optimization procedure to iteratively optimize the workflow quality. Besides, this work offers two workflow generation methods: fine-tuning-based and in-context-based methods, making the AutoFlow framework applicable to both open-source and closed-source LLMs. Experimental results show that our framework can produce robust and reliable agent workflows. We believe that the automatic generation and interpretation of workflows in natural language represent a promising paradigm for solving complex tasks, particularly with the rapid development of LLMs. The source code of this work is available at https://github.com/agiresearch/AutoFlow.

Large language model (LLM) agents must generalize from tools seen during training to unseen tools at deployment. A key challenge is tool trialing, i.e., excessive trials waste the interaction budget, whereas selective trials enable exploration of unfamiliar tools. Existing outcome-based post-training leaves wasteful trials unguided, while turn-level supervision may suppress necessary exploration. We introduce ToolCompass, a post-training framework that guides tool trialing by organizing tool-call representations according to shared functions. Specifically, ToolCompass models each function class as a von Mises--Fisher distribution and jointly reduces intra-function variation across domains and increases inter-function separation. This structure transfers experience from seen tools to functionally similar unseen tools, directing exploration away from unrelated alternatives. ToolCompass requires no ground-truth call traces or unseen-tool access and incurs no inference overhead. Experiments on AppWorld and FTRL show consistent gains across GRPO, RFT, and DMPO. improves AppWorld OOD task success by up to 10.71 percentage points over vanilla post-training and performs best among competitive baselines on both benchmarks.

Multi-agent LLM workflows route inference through specialized roles to lift end-task accuracy, but jointly training those roles with reinforcement learning is unstable in ways that are poorly understood. We study when end-to-end RL training of multi-agent LLM workflows improves over their base models, comparing Shared-Policy training, where all roles update one policy, with Isolated-Policy training, where each role has its own parameters. Our experimental matrix spans Eval-Opt, Voting, and Orch-Workers workflows, math and code tasks, and three model scales (0.6B, 1.7B, 4B). We find that multi-agent RL usually improves over base models, but gains depend jointly on workflow, task, and scale, not on policy sharing alone. Isolated-Policy tends to reach higher peak accuracy yet more often falls off a terminal accuracy cliff, while Shared-Policy training does not eliminate failure; it redistributes failure into qualitatively different patterns. We then explain the strongest of these patterns through role-level gradient dynamics induced by workflow topology and policy routing: under Isolated-Policy, parallel same-role agents on shared prompts amplify per-role gradients and drive terminal degradation in Voting and Orch-Workers workflows; under Shared-Policy, asymmetric per-step gradient mass causes the shared policy to be captured by the dominant role, producing different failure signatures by task and workflow. Together, the empirical map and its underlying mechanisms show that policy sharing routes training pressure through different channels rather than offering uniform stability, making it a design choice with workflow- and task-conditional tradeoffs.

We present a novel framework for training large language models with continuously adjustable internal representations that span the full spectrum from localist (interpretable, rule-based) to distributed (generalizable, efficient) encodings. The key innovations are (1) a locality dial, a tunable parameter that dynamically controls the degree of localization during both training and inference without requiring model retraining, (2) an information-theoretic recruitment mechanism that adaptively allocates semantic blocks as needed, eliminating the requirement for complete domain knowledge at initialization, and (3) a hierarchical recruitment framework that extends capacity allocation to entire specialized LLMs, enabling multi-granularity architectural adaptation. This is achieved through group sparsity penalties on attention mechanisms, information-theoretic anchor design, dynamic rule injection, and principled recruitment criteria based on penalized likelihood with explicit units. We provide rigorous mathematical results establishing explicit threshold conditions under which attention provably concentrates on semantically relevant blocks at stationary points, with exact bounds on attention entropy and pointer fidelity. The hierarchical recruitment mechanism provides convergence guarantees at both the block level (fine-grained, within-LLM) and the LLM level (coarse-grained, cross-domain), ensuring the system discovers semantic partitions that balance model complexity against data encoding efficiency. This framework enables practitioners to continuously interpolate between interpretable and high-performance modes while adapting architectural capacity at multiple granularities, supporting applications in regulated domains requiring both transparency and capability.

Reliably composing Large Language Models (LLMs) for complex, multi-step workflows remains a significant challenge. The dominant paradigm -- optimizing discrete prompts in a pipeline -- is notoriously brittle and struggles to enforce the formal compliance required for structured tasks. We introduce Type-Compliant Adaptation Cascades (TACs), a framework that recasts workflow adaptation as learning typed probabilistic programs. TACs treat the entire workflow, which is composed of parameter-efficiently adapted LLMs and deterministic logic, as an unnormalized joint distribution. This enables principled, gradient-based training even with latent intermediate structures. We provide theoretical justification for our tractable optimization objective, proving that the optimization bias vanishes as the model learns type compliance. Empirically, TACs significantly outperform state-of-the-art prompt-optimization baselines. Gains are particularly pronounced on structured tasks, improving FinQA from 12.0% to 24.7% for a Qwen 3 8B model, MGSM-SymPy from 57.1% to 75.9% for a Gemma 2 27B model, MGSM from 1.6% to 27.3%, and MuSR from 36.5% to 62.6% for a Gemma 7B model. TACs offer a robust and theoretically grounded paradigm for developing reliable, task-compliant LLM systems.

Large Language Models (LLMs) have demonstrated effectiveness in code generation tasks. To enable LLMs to address more complex coding challenges, existing research has focused on crafting multi-agent systems with agentic workflows, where complex coding tasks are decomposed into sub-tasks, assigned to specialized agents. Despite their effectiveness, current approaches heavily rely on hand-crafted agentic workflows, with both agent topologies and prompts manually designed, which limits their ability to automatically adapt to different types of coding problems. To address these limitations and enable automated workflow design, we propose Self-Evolving Workflow (SEW), a novel self-evolving framework that automatically generates and optimises multi-agent workflows. Extensive experiments on three coding benchmark datasets, including the challenging LiveCodeBench, demonstrate that our SEW can automatically design agentic workflows and optimise them through self-evolution, bringing up to 33\% improvement on LiveCodeBench compared to using the backbone LLM only. Furthermore, by investigating different representation schemes of workflow, we provide insights into the optimal way to encode workflow information with text.

Foundation GUI agents can automate complex digital tasks, but deployment is hindered by scarce and biased training data, ambiguous prompts, and unreliable execution. Routine workflows rely on user-specific tools and tacit conventions, so unstated instructions can produce arbitrary variations across runs. We present UI-Mate, a foundation GUI agent that integrates an environment-grounded training stack with in-context demonstration learning. UI-Mate makes three contributions: A Scalable Environment-Grounded Training Stack: A closed-loop data engine automates task generation, environment construction, rollout, filtering, capability balancing, SFT, and online RL across massively parallel environments via unified task-verifier bundles. In-Context Demonstration Learning: A mechanism that transforms multimodal demonstrations into flexible subtask-level workflows, follows relevant demonstrated steps, and re-plans from the live interface. OSWorkerBench Benchmark and Insights: A benchmark of 100 long-horizon office tasks across 41 applications that supports instruction-only and demonstration-guided evaluation. Its demonstration resources separate a 33-task self-demo setting, built from successful strong-agent rollouts of the same targets, from a 45-task variant-demo setting, built from human recordings of related but non-identical tasks. Experiments show that UI-Mate-27B sets a new open-weight state of the art on general computer-use benchmarks, scoring 77.0% on OSWorld-Verified and 66.2% on WindowsAgentArena. On OSWorkerBench, it reaches 41.0% strict success and 76.9% progress, outperforming its Qwen3.6-27B base by 17.7 and 24.5 points. On the 33-task self-demo subset, one demonstration raises strict success from 17.2% to 35.4% and progress from 67.9% to 81.1%, substantially improving long-horizon reliability. Project page: https://ui-mate.github.io.

Language Agent could be endowed with different mechanisms for autonomous task accomplishment. Current agents typically rely on fixed mechanisms or a set of mechanisms activated in a predefined order, limiting their adaptation to varied potential task solution structures. To this end, this paper proposes Adaptive Language Agent Mechanism Activation Learning with Self-Exploration (ALAMA), which focuses on optimizing mechanism activation adaptability without reliance on expert models. Initially, it builds a harmonized agent framework (UniAct) to Unify different mechanisms via Actions. Then it leverages a training-efficient optimization method based on self-exploration to enable the UniAct to adaptively activate the appropriate mechanisms according to the potential characteristics of the task. Experimental results demonstrate significant improvements in downstream agent tasks, affirming the effectiveness of our approach in facilitating more dynamic and context-sensitive mechanism activation.

At present, executable visual workflows have emerged as a mainstream paradigm in real-world industrial deployments, offering strong reliability and controllability. However, in current practice, such workflows are almost entirely constructed through manual engineering: developers must carefully design workflows, write prompts for each step, and repeatedly revise the logic as requirements evolve-making development costly, time-consuming, and error-prone. To study whether large language models can automate this multi-round interaction process, we introduce Chat2Workflow, a benchmark for generating executable visual workflows directly from natural language, and propose a robust agentic framework to mitigate recurrent execution errors. Chat2Workflow is built from a large collection of real-world business workflows, with each instance designed so that the generated workflow can be transformed and directly deployed to practical workflow platforms such as Dify and Coze. Experimental results show that while state-of-the-art language models can often capture high-level intent, they struggle to generate correct, stable, and executable workflows, especially under complex or changing requirements. Although our agentic framework yields up to 5.34% resolve rate gains, the remaining real-world gap positions Chat2Workflow as a foundation for advancing industrial-grade automation. Code is available at https://github.com/zjunlp/Chat2Workflow.

Large Action Models (LAMs) extend large language models by enabling autonomous decision-making and tool execution, making them promising for automating scientific workflows. However, scientific workflows impose strict requirements on reproducibility, auditability, and deterministic execution, which are not satisfied by generic LLM-based agents. Unconstrained action generation can lead to silent state changes, non-deterministic executions, and irreproducible experimental results, limiting the applicability of LAMs in scientific settings. In this paper, we propose R-LAM, a reproducibility-constrained framework for applying Large Action Models to scientific workflow automation. R-LAM introduces structured action schemas, deterministic execution policies, and explicit provenance tracking to ensure that every action and intermediate artifact is auditable and replayable. The framework supports failure-aware execution loops and controlled workflow forking, enabling iterative experimentation without compromising reproducibility. We implement R-LAM as a lightweight Python framework and release it as an open-source PyPI package to facilitate reproducible research. An experimental evaluation of representative scientific workflows demonstrates that R-LAM improves reproducibility success rates and execution reliability compared to unconstrained LLM-based agents, while retaining adaptive control over workflow execution.

Memory, planning, reflection, and tool use are often compared as feature labels, obscuring the control semantics that determine how an agent actually runs. This review connects ten historical cognitive architectures, eight language-agent runtime families, and forty-two mechanism-focused modern systems. We reconstruct each mechanism through state, control, transition, persistence, failure, learning, and resource governance, then code evidence relation (E1-E4) separately from migration depth (D0-D4). The resulting landscape is uneven. Modern agents have operationalized substantial parts of adaptive memory, failure recovery, dynamic team selection, workflow search, skill induction, resource scheduling, and uncertainty-conditioned action, although often through independent convergence rather than documented inheritance. The strongest remaining opportunities lie in couplings among mechanisms. Closest-baseline screening closes one proposed gap: GraSP already combines calibrated multi-skill selection, typed compilation, verification, bounded repair, and replanning or ReAct fallback. Five residual bundles remain: activation with latency and action utility; typed impasse with isolated substates and resolution compilation; bounded content competition with broadcast and admission learning; persistent intention with reconsideration and live method authority; and uncertainty with resource allocation, interruption, and stopping. We contribute a distinctive-mechanism catalog, an auditable evidence-depth framework, and a falsifiable agenda for testing these bundles as composable runtime invariants.

Tool-use capability is a fundamental component of LLM agents, enabling them to interact with external systems through structured function calls. However, existing research exhibits inconsistent interaction representations, largely overlooks the structural distribution of tool-use trajectories, and relies on incompatible evaluation benchmarks. We present UniToolCall, a unified framework for tool learning that standardizes the entire pipeline from toolset construction and dataset generation to evaluation. The framework curates a large tool pool of 22k+ tools and constructs a hybrid training corpus of 390k+ instances by combining 10 standardized public datasets with structurally controlled synthetic trajectories. It explicitly models diverse interaction patterns, including single-hop vs. multi-hop and single-turn vs. multi-turn, while capturing both serial and parallel execution structures. To support coherent multi-turn reasoning, we further introduce an Anchor Linkage mechanism that enforces cross-turn dependencies. Furthermore, we convert 7 public benchmarks into a unified Query--Action--Observation--Answer (QAOA) representation with fine-grained evaluation at the function-call, turn, and conversation levels. Experiments show that fine-tuning Qwen3-8B on our dataset substantially improves tool-use performance. Under the distractor-heavy Hybrid-20 setting, achieves 93.0% single-turn Strict Precision, outperforming commercial models including GPT, Gemini, and Claude.

Large language models (LLMs) have demonstrated remarkable capabilities in complex reasoning tasks when equipped with external tools. However, current frameworks predominantly rely on sequential processing, leading to inefficient execution particularly for tasks requiring extensive tool interaction. This paper introduces Flash-Searcher, a novel parallel agent reasoning framework that fundamentally reimagines the execution paradigm from sequential chains to directed acyclic graphs (DAGs). Flash-Searcher decomposes complex tasks into subtasks with explicit dependencies, enabling concurrent execution of independent reasoning paths while maintaining logical constraints. Through dynamic workflow optimization, our framework continuously refines the execution graph based on intermediate results, effectively integrating summary module. Comprehensive evaluations across multiple benchmarks demonstrate that Flash-Searcher consistently outperforms existing approaches. Specifically, it achieves 67.7% accuracy on BrowseComp and 83% on xbench-DeepSearch, while reducing agent execution steps by up to 35% compared to current frameworks. Furthermore, when distilling this parallel reasoning pipeline into single models, we observe substantial performance gains across diverse backbone architectures, underscoring the generalizability of our methodology. Our work thus represents a significant advance in agent architecture design, offering a more scalable and efficient paradigm for complex reasoning tasks.

The ability of large language models (LLMs) to mimic human-like intelligence has led to a surge in LLM-based autonomous agents. Though recent LLMs seem capable of planning and reasoning given user instructions, their effectiveness in applying these capabilities for autonomous task solving remains underexplored. This is especially true in enterprise settings, where automated agents hold the promise of a high impact. To fill this gap, we propose WorkArena++, a novel benchmark consisting of 682 tasks corresponding to realistic workflows routinely performed by knowledge workers. WorkArena++ is designed to evaluate the planning, problem-solving, logical/arithmetic reasoning, retrieval, and contextual understanding abilities of web agents. Our empirical studies across state-of-the-art LLMs and vision-language models (VLMs), as well as human workers, reveal several challenges for such models to serve as useful assistants in the workplace. In addition to the benchmark, we provide a mechanism to effortlessly generate thousands of ground-truth observation/action traces, which can be used for fine-tuning existing models. Overall, we expect this work to serve as a useful resource to help the community progress toward capable autonomous agents. The benchmark can be found at https://github.com/ServiceNow/WorkArena/tree/workarena-plus-plus.

How should Large Language Model (LLM) practitioners select the right model for a task without wasting money? We introduce BELLA (Budget-Efficient LLM Selection via Automated skill-profiling), a framework that recommends optimal LLM selection for tasks through interpretable skill-based model selection. Standard benchmarks report aggregate metrics that obscure which specific capabilities a task requires and whether a cheaper model could suffice. BELLA addresses this gap through three stages: (1) decomposing LLM outputs and extract the granular skills required by using critic-based profiling, (2) clustering skills into structured capability matrices, and (3) multi-objective optimization to select the right models to maximize performance while respecting budget constraints. BELLA provides natural-language rationale for recommendations, providing transparency that current black-box routing systems lack. We describe the framework architecture, situate it within the landscape of LLM routing and evaluation, and discuss its application to financial reasoning as a representative domain exhibiting diverse skill requirements and cost-variation across models. Our framework enables practitioners to make principled and cost-performance trade-offs for deploying LLMs.

Agentic software-engineering and industrial systems increasingly operate through executable workflows rather than code genera- tion alone: they search artifacts, invoke tools, inspect structured observations, and query databases. Training these agents requires supervision data that captures valid tool interactions and executable workflows. However, traditional query-first data synthesis can fail because plausible user requests may not correspond to valid tool sequences, compatible parameters, or available data. To address this limitation, we propose SyntheticAgentTraceQA, an execution- first framework for generating scalable supervision data for tool- augmented agents. Our framework first constructs high-level work- flow structures, maps them to available tools through dependency- aware assignment, executes and validates the resulting traces in con- trolled environments, and only then synthesizes natural-language user tasks, teacher-generated reasoning annotations, and reference answers. We evaluate the framework across four tool ecosystems and use the resulting data to fine-tune and evaluate Qwen model variants. The results show that execution-grounded supervision improves tool execution behavior, reference-trace agreement, and answer-generation performance on the evaluated tasks. Further analysis reveals a supervision trade-off: masked supervision, which excludes reasoning annotations from the training objective, im- proves final-answer metrics, whereas full supervision, computing loss over the complete assistant output including reasoning tokens, underperforms on answer quality and does not consistently im- prove reference-trace agreement, particularly at the 9B scale. These findings highlight the importance of designing synthetic supervi- sion according to the desired capabilities of tool-augmented agents.

Large language model (LLM) routing aims to assign each query to the most suitable model from a heterogeneous candidate pool, improving the quality--efficiency trade-off of LLM inference. Existing routers are typically learned through local fitting: a router is optimized for a particular query workload and candidate pool, and often requires additional supervision or retraining as the routing environment changes. We ask whether LLM routing can instead be approached from a foundation-model perspective, learning a reusable routing capability that generalizes across tasks, candidate models, and deployment conditions. To this end, we introduce RouteFM, which learns to characterize anonymous candidate models from behavioral context and infer their target-specific capabilities, rather than binding routing decisions to fixed model identities or a single environment. Through episodic pretraining across heterogeneous routing environments, this capability can be reused by a frozen router and adapted to new environments through context alone. Experiments demonstrate transfer across changes in domains, modalities, candidate pools, and context budgets, with the largest gains when behavioral evidence is limited. On MMR-Bench, which is excluded from pretraining, RouteFM outperforms the strongest baseline by 2.23 quality points with only eight observations per candidate. These results support moving LLM routing from repeated local fitting toward a pretrain once, route anywhere paradigm. Our code is publicly available at https://github.com/LAMDA-Model-Reuse/RouteFM.

Existing computer-use agent benchmarks do not fully evaluate agents acting as assistants. A useful assistant retrieves information across complex, multi-step workflows, synthesizes it into artifacts (documents, presentations, spreadsheets), and navigates program interfaces to produce a coherent final product. Such workflows demand reasoning and synthesis, decomposition of complex tasks, as well as visual and spatial understanding. To study agents on workflows like these, we introduce KNOWS, a benchmark of open-ended, complex, browser-based tasks that jointly evaluate these capabilities, with each task culminating in a produced artifact. To write tasks, we develop a task design rubric and a protocol for ensuring that tasks meet the requirements. Each task is paired with an evaluator, a program that combines deterministic checks with LLM judgments to balance the richness, reliability, and automation tradeoff inherent to agent evaluation. We evaluate and analyze frontier computer-use agents and browser-based harnesses. They achieve moderate scores on partial-success metrics, but the best performer fully succeeds in fewer than 3% of our complex, long-horizon tasks. Failures on visual steps render the resulting artifacts unusable, even when agents complete more than 50% of other evaluation steps. Our results expose limitations of current agents acting as end-to-end assistants, and call for progress on tool use, visual understanding, and long-horizon reasoning.

Multi-agent LLM systems that generate structured workflows from natural-language requests are now deployed in production across cloud automation, DevOps, and enterprise process orchestration. Operating such systems exposes a recurring change-management problem. Routine updates, such as re-running the same input, swapping the underlying LLM, or refactoring an agent's prompt or orchestration code, frequently produce workflows that differ substantially from previously validated references. Engineers are then left without a principled way to decide whether a change is safe to ship. Automatic workflow evaluation is the natural tool for answering this question. In practice, however, metric scores are poorly calibrated, and a numeric change rarely communicates the severity of the underlying degradation. We introduce WorkflowPerturb, a controlled benchmark for studying workflow evaluation metrics by applying realistic, graded perturbations to golden workflows. WorkflowPerturb contains 4,973 golden workflows and 44,757 perturbed variants across three perturbation types (Missing Steps, Compressed Steps, and Description Changes), each applied at severity levels of 10%, 30%, and 50%. We benchmark multiple metric families and analyze their sensitivity and calibration using expected score trajectories and residuals. Our results characterize systematic differences across metric families and support severity-aware interpretation of workflow evaluation scores in change-management settings. Our dataset will be released upon acceptance.

Large Language Model (LLM) agents are increasingly deployed for complex, multi-step software engineering (SWE) tasks. However, their trajectories often contain costly inefficiencies, such as redundant exploration, looping, and failure to terminate once a solution is reached. Prior work has largely treated these errors in a post-hoc manner, diagnosing failures only after execution. In this paper, we introduce SWE-PRM, an inference-time Process Reward Model (PRM) that intervenes during execution to detect and course-correct trajectory-level errors. Our PRM design leverages a taxonomy of common inefficiencies and delivers lightweight, interpretable feedback without modifying the underlying policy. On SWE-bench Verified, closed-source PRMs improve resolution from 40.0% to 50.6% (+10.6 p.p.), with the largest gains on medium and hard tasks. Among feedback strategies, taxonomy-guided PRMs outperform unguided or explicit action-prescriptive variants, increasing success rate while reducing trajectory length. These benefits come at an acceptable added inference cost of as low as $0.2, making PRMs a practical and scalable mechanism for improving SWE agents' reliability and efficiency.

Agent harnesses have become the operational infrastructure of modern large language model agents, coordinating context, tools, verification, and execution control to translate latent model capability into reliable long-horizon behavior. However, reliable long-horizon behavior requires harness control to adapt to task demands, execution environments, and evolving execution states, whereas current harnesses predominantly rely on hand-crafted or globally fixed policies; this mismatch manifests as unnecessary computational overhead and, in adverse cases, reduced task success. To address this limitation, we formulate the task of enabling adaptive orchestration in harness systems as a causal learning problem and propose Counterfactual Harness Intervention Learning for Long-Horizon Agents (CHILL-Harness). CHILL-Harness intervenes at the orchestration layer to enable advantage-guided workflow adaptation, thereby improving reasoning and execution efficiency while preserving task performance. Specifically, we develop causal intervention effect learning as the effect-estimation component of CHILL-Harness to estimate intervention-relative workflow advantage from confidence-weighted execution evidence and identify advantageous workflow adaptations. We further introduce advantage-realizing causal orchestration as its realization component to adaptively allocate counterfactual reasoning and realize only workflow adjustments supported by sufficient expected advantage. Finally, we incorporate a success-preserving objective and advantage-margin authorization constraints into CHILL-Harness to promote reliable adaptation. Extensive experiments on heterogeneous long-horizon tasks spanning information seeking, software engineering, and terminal interaction show that CHILL-Harness consistently preserves or improves task success while substantially reducing token consumption and execution time.

Despite recent advancements in large language models (LLMs), their performance on complex reasoning problems requiring multi-step thinking and combining various skills is still limited. To address this, we propose a novel framework HDFlow for complex reasoning with LLMs that combines fast and slow thinking modes in an adaptive manner. Our approach consists of two key components: 1) a new approach for slow, deliberate reasoning called Dynamic Workflow, which automatically decomposes complex problems into more manageable sub-tasks and dynamically designs a workflow to assemble specialized LLM or symbolic reasoning tools to solve sub-tasks; 2) Hybrid Thinking, a general framework that dynamically combines fast and slow thinking based on problem complexity. Finally, we propose an easy-to-scale method for automatically synthesizing a large-scale dataset of 27K challenging reasoning problems for complex reasoning and a hybrid thinking tuning method that trains smaller LLMs on this dataset to internalize the fast/slow hybrid reasoning strategies. Experiments on four reasoning benchmark datasets demonstrate that our slow thinking with dynamic workflows significantly outperforms Chain-of-Thought, and hybrid thinking achieves the highest accuracy while providing an effective balance between computational efficiency and performance. Fine-tuning using our hybrid thinking approach also significantly boosts the complex reasoning capabilities of open-source language models. The results showcase the promise of slow thinking, dynamic workflows, and hybrid thinking in expanding the frontier of complex problem-solving with LLMsCode and data will be released at \url{https://github.com/wenlinyao/HDFlow.}.

Human-written agent skills encode rich workflows for real-world problem solving, but are typically used as external inference-time instructions rather than internalized as reusable model capabilities. We introduce SkillGym, a framework that transforms these skills into executable, verifiable training environments for large language model agents. Its skill-to-task pipeline instantiates concrete tasks, verifies outcomes with code-based checkers, and assesses empirical skill dependence through contrastive executions. We construct and release 2,756 environments across 12 categories and collect 8,364 successful trajectories from multiple models and harnesses, averaging 49 tool calls and over 60k logged text tokens. These resources support supervised fine-tuning on verified workflows and reinforcement learning with outcome-based rewards. Under Claude Code, supervised fine-tuning improves Qwen3.5-35B-A3B by 199 Elo on GDPval-AA v2, 19.10 percentage points on Terminal-Bench 2.1, and 28.13 and 12.38 points on SkillsBench v1.1 with and without skills, respectively. Our 35B SkillGym-Agent reaches 51.47\% on skill-assisted SkillsBench, exceeding reported scores for Claude Sonnet 4.6, GPT-5.4 Mini, and DeepSeek V4 Pro. Without skills, it also surpasses skill-assisted bases under Codex and Claude Code, suggesting reusable procedural competence.

The rapid advancement of Large Language Models (LLMs) and their integration into autonomous agent systems has created unprecedented opportunities for document analysis, decision support, and knowledge retrieval. However, the complexity of developing, evaluating, and iterating on LLM-based agent workflows presents significant barriers to researchers, particularly those without extensive software engineering expertise. We present FROAV (Framework for RAG Observation and Agent Verification), an open-source research platform that democratizes LLM agent research by providing a plug-and-play architecture combining visual workflow orchestration, a comprehensive evaluation framework, and extensible Python integration. FROAV implements a multi-stage Retrieval-Augmented Generation (RAG) pipeline coupled with a rigorous "LLM-as-a-Judge" evaluation system, all accessible through intuitive graphical interfaces. Our framework integrates n8n for no-code workflow design, PostgreSQL for granular data management, FastAPI for flexible backend logic, and Streamlit for human-in-the-loop interaction. Through this integrated ecosystem, researchers can rapidly prototype RAG strategies, conduct prompt engineering experiments, validate agent performance against human judgments, and collect structured feedback-all without writing infrastructure code. We demonstrate the framework's utility through its application to financial document analysis, while emphasizing its material-agnostic architecture that adapts to any domain requiring semantic analysis. FROAV represents a significant step toward making LLM agent research accessible to a broader scientific community, enabling researchers to focus on hypothesis testing and algorithmic innovation rather than system integration challenges.

Reinforcement learning (RL) has become a promising paradigm for optimizing Retrieval-Augmented Generation (RAG) in complex reasoning tasks. However, traditional outcome-based RL approaches often suffer from reward sparsity and inefficient credit assignment, as coarse-grained scalar rewards fail to identify specific erroneous steps within long-horizon trajectories. This ambiguity frequently leads to "process hallucinations", where models reach correct answers through flawed logic or redundant retrieval steps. Although recent process-aware approaches attempt to mitigate this via static preference learning or heuristic reward shaping, they often lack the on-policy exploration capabilities required to decouple step-level credit from global outcomes. To address these challenges, we propose ProRAG, a process-supervised reinforcement learning framework designed to integrate learned step-level supervision into the online optimization loop. Our framework consists of four stages: (1) Supervised Policy Warmup to initialize the model with a structured reasoning format; (2) construction of an MCTS-based Process Reward Model (PRM) to quantify intermediate reasoning quality; (3) PRM-Guided Reasoning Refinement to align the policy with fine-grained process preferences; and (4) Process-Supervised Reinforcement Learning with a dual-granularity advantage mechanism. By aggregating step-level process rewards with global outcome signals, ProRAG provides precise feedback for every action. Extensive experiments on five multi-hop reasoning benchmarks demonstrate that ProRAG achieves superior overall performance compared to strong outcome-based and process-aware RL baselines, particularly on complex long-horizon tasks, validating the effectiveness of fine-grained process supervision. The code and model are available at https://github.com/lilinwz/ProRAG.

Methods for knowledge editing and unlearning in large language models seek to edit or remove undesirable knowledge or capabilities without compromising general language modeling performance. This work investigates how mechanistic interpretability -- which, in part, aims to identify model components (circuits) associated to specific interpretable mechanisms that make up a model capability -- can improve the precision and effectiveness of editing and unlearning. We find a stark difference in unlearning and edit robustness when training components localized by different methods. We highlight an important distinction between methods that localize components based primarily on preserving outputs, and those finding high level mechanisms with predictable intermediate states. In particular, localizing edits/unlearning to components associated with the lookup-table mechanism for factual recall 1) leads to more robust edits/unlearning across different input/output formats, and 2) resists attempts to relearn the unwanted information, while also reducing unintended side effects compared to baselines, on both a sports facts dataset and the CounterFact dataset across multiple models. We also find that certain localized edits disrupt the latent knowledge in the model more than any other baselines, making unlearning more robust to various attacks.

Naturalistic computer-use traces, passively recorded screenshots and mouse or keyboard actions, are a valuable resource for deriving symbolic, auditable, and reusable models of how everyday work is done. Such models matter as computer-use agents enter real work, where agents need to learn how tasks are actually performed, and organizations need to audit and reuse that knowledge. However, inducing such task models is challenging, as activity is observed only as low-level events and real-world work is multi-threaded with interleaved goals. Existing methods assume a given task or a single workflow, and produce step-level summaries rather than structured task models. We introduce Task Model Induction (TMI), which (i) discovers the latent tasks in an unconstrained trace, disentangling concurrent activity, and (ii) for each latent task, induces a task model pairing a hierarchical objective model of recursive goal decomposition with a procedure model of the control flow that organized the execution. Intrinsically, on controlled human and agent trajectories, TMI recovers interleaved tasks with 0.974 agreement against ground-truth groupings and reconstructs 74.9% of the observed execution steps, far more than the strongest workflow induction baseline. Extrinsically, skills derived from TMI's task models improve held-out task accuracy by 30.0% over the strongest baseline.

Locating relevant files from natural-language requests is a core subtask for agents operating over code repositories. We investigate whether this task can be delegated to compact, specialized models to enable on-device search while reducing the token usage, latency, and inference cost of larger agents. We show that semantic search improves file localization, with gains in accuracy, cross-language transfer, and inference efficiency. To study this setting, we introduce a training framework for file-localization agents built around ColGREP, a local semantic search tool based on late-interaction retrieval models. Our recipe combines weighted supervised fine-tuning on teacher trajectories, assigning turn-level credit based on retrieval outcomes, with reinforcement learning on localization quality. We train three model families with fewer than two billion parameters to formulate search queries, inspect retrieved content, and identify relevant files. On localization tasks derived from SWE-bench Lite and Multi-SWE-bench Flash, ColGREP-equipped agents substantially improve over their base models and outperform corresponding GREP-based agents. In addition to improving localization accuracy, ColGREP reduces mean end-to-end trajectory latency by 44.1\% on CPU while using 29.1\% fewer tokens, and enables better generalization to programming languages unseen during fine-tuning. These results suggest that compact, tool-specialized localization agents can provide an efficient interface between natural-language requests and large codebases.

Issue localization, the process of identifying code locations that need modification to resolve software issues, is a critical yet challenging task in software development. The semantic gap between natural language issue descriptions and faulty code requires complex multi-hop reasoning through code dependencies. Existing LLM-based agents attempt to address this by integrating repository retrieval tools. However, this transforms issue localization into a demanding task we call Repo Deep Search, which requires the LLM to effectively utilize various repository retrieval tools throughout a multi-step reasoning and navigation process. To tackle this challenge, we present ToolTrain, a two-stage tool-integrated training framework combining rejection-sampled supervised fine-tuning and tool-integrated reinforcement learning to enhance LLMs' ability to use retrieval tools for issue localization. Experimental results show that ToolTrain-trained models achieve state-of-the-art performance, with our 32B model even surpassing Claude-3.7 on function-level localization. The results also show that improved localization performance translates to better end-to-end issue resolution performance. This further demonstrates that training for issue localization is a viable and effective strategy for improving automated software development.

Modern LLM deployments confront a widening cost-performance spectrum: premium models deliver strong reasoning but are expensive, while lightweight models are economical yet brittle on complex tasks. Static escalation rules and keyword heuristics under-utilize this spectrum and fail to adapt across task types. We present xRouter, a tool-calling-based routing system in which a learned router can either answer directly or invoke one or more external models. The router is trained end-to-end with reinforcement learning using an explicit, cost-aware reward that encodes cost-performance trade-offs, eliminating the need for hand-engineered routing rules. Our implementation encompasses the full reinforcement learning framework, including reward and cost accounting, as well as the deployment and evaluation pipelines. Across diverse benchmarks, xRouter achieves strong cost-performance trade-offs (e.g., substantial cost reductions at comparable task completion rates), and provides empirical insights into what reliably helps learned routing and what does not, ranging from model trainability to the difficulty of eliciting sophisticated orchestration behaviors in small open models. We hope these findings and our open implementation will serve as a practical substrate for advancing learned, cost-aware LLM orchestration.

Scientific reasoning inherently demands integrating sophisticated toolkits to navigate domain-specific knowledge. Yet, current benchmarks largely overlook agents' ability to orchestrate tools for such rigorous workflows. To bridge this gap, we introduce SciAgentGym, a scalable interactive environment featuring 1,780 domain-specific tools across four natural science disciplines, supported by a robust execution infrastructure. Complementing this, we present SciAgentBench, a tiered evaluation suite designed to stress-test agentic capabilities from elementary actions to long-horizon workflows. Our evaluation identifies a critical bottleneck: state-of-the-art models struggle with complex scientific tool-use. Even for a leading model like GPT-5, success rates drop sharply from 60.6% to 30.9% as interaction horizons extend, primarily due to failures in multi-step workflow execution. To address this, we propose SciForge, a data synthesis method that models the tool action space as a dependency graph to generate logic-aware training trajectories. By fine-tuning on these trajectories, our SciAgent-8B outperforms the significantly larger Qwen3-VL-235B-Instruct while exhibiting positive cross-domain transfer of scientific tool-use capabilities. These results underscore the promising potential of next-generation autonomous scientific agents.

Large language models (LLMs) embedded in multi-turn agentic harnesses are reshaping software engineering (SWE), but routing every task to a frontier model is wasteful when many issues admit cheap fixes. Existing LLM routers operate on the task description alone, which inherits an information-theoretic Bayes-error floor in agentic settings: a similar issue can hide either a localized typo or a multi-module refactor, and the prompt does not separate the two. We introduce SWE-Router, a value-based temporal approach that lets a cheap model run for a few exploratory turns and reads the resulting partial trajectory before deciding whether to continue cheaply or to escalate to an expensive model. We provide a Bayes-optimality theorem showing that conditioning on the partial trajectory never harms routing and is strictly better whenever exploration is informative. Across the LLM pairs of weak and strong models spanning the contemporary cost--capability frontier, we show that SWE-Router greatly improves the cost efficiency of SWE tasks, while maintaining the majority of the performances of the stronger model. We additionally release a multi-LLM trajectory dataset which allows reproduction of our trajectory-level routing.

Deep research agents integrate fragmented evidence through multi-step tool use. BrowseComp offers a text-only testbed for such agents, but existing multimodal benchmarks rarely require both weak visual cues composition and BrowseComp-style multi-hop verification. Geolocation is a natural testbed because answers depend on combining multiple ambiguous visual cues and validating them with open-web evidence. Thus, we introduce GeoBrowse, a geolocation benchmark that combines visual reasoning with knowledge-intensive multi-hop queries. Level 1 tests extracting and composing fragmented visual cues, and Level 2 increases query difficulty by injecting long-tail knowledge and obfuscating key entities. To support evaluation, we provide an agentic workflow GATE with five think-with-image tools and four knowledge-intensive tools, and release expert-annotated stepwise traces grounded in verifiable evidence for trajectory-level analysis. Experiments show that GATE outperforms direct inference and open-source agents, indicating that no-tool, search-only or image-only setups are insufficient. Gains come from coherent, level-specific tool-use plans rather than more tool calls, as they more reliably reach annotated key evidence steps and make fewer errors when integrating into the final decision. The GeoBrowse bernchmark and codes are provided in https://github.com/ornamentt/GeoBrowse

Large language models (LLMs) have demonstrated strong potential and impressive performance in automating the generation and optimization of workflows. However, existing approaches are marked by limited reasoning capabilities, high computational demands, and significant resource requirements. To address these issues, we propose DebFlow, a framework that employs a debate mechanism to optimize workflows and integrates reflexion to improve based on previous experiences. We evaluated our method across six benchmark datasets, including HotpotQA, MATH, and ALFWorld. Our approach achieved a 3\% average performance improvement over the latest baselines, demonstrating its effectiveness in diverse problem domains. In particular, during training, our framework reduces resource consumption by 37\% compared to the state-of-the-art baselines. Additionally, we performed ablation studies. Removing the Debate component resulted in a 4\% performance drop across two benchmark datasets, significantly greater than the 2\% drop observed when the Reflection component was removed. These findings strongly demonstrate the critical role of Debate in enhancing framework performance, while also highlighting the auxiliary contribution of reflexion to overall optimization.

Large Language Models (LLMs) have emerged as powerful conversational interfaces, and their application in process mining (PM) tasks has shown promising results. However, state-of-the-art LLMs struggle with complex scenarios that demand advanced reasoning capabilities. In the literature, two primary approaches have been proposed for implementing PM using LLMs: providing textual insights based on a textual abstraction of the process mining artifact, and generating code executable on the original artifact. This paper proposes utilizing the AI-Based Agents Workflow (AgWf) paradigm to enhance the effectiveness of PM on LLMs. This approach allows for: i) the decomposition of complex tasks into simpler workflows, and ii) the integration of deterministic tools with the domain knowledge of LLMs. We examine various implementations of AgWf and the types of AI-based tasks involved. Additionally, we discuss the CrewAI implementation framework and present examples related to process mining.

LLM agents operating over massive, dynamic tool libraries rely on effective retrieval, yet standard single-shot dense retrievers struggle with complex requests. These failures primarily stem from the disconnect between abstract user goals and technical documentation, and the limited capacity of fixed-size embeddings to model combinatorial tool compositions. To address these challenges, we propose TOOLQP, a lightweight framework that models retrieval as iterative query planning. Instead of single-shot matching, TOOLQP decomposes instructions into sub-tasks and dynamically generates queries to interact with the retriever, effectively bridging the semantic gap by targeting the specific sub-tasks required for composition. We train TOOLQP using synthetic query trajectories followed by optimization via Reinforcement Learning with Verifiable Rewards (RLVR). Experiments demonstrate that TOOLQP achieves state-of-the-art performance, exhibiting superior zero-shot generalization, robustness across diverse retrievers, and significant improvements in downstream agentic execution.

Large-scale formalization of advanced mathematics requires more than translating individual statements: it must reconstruct a coherent theory distributed across heterogeneous sources. This process raises four challenges: discovering implicit dependencies, correcting source defects, preserving semantic fidelity, and reconciling cross-source misalignments. We present FormaTheoria, an end-to-end, AI-assisted workflow that coordinates source acquisition, formalization, proof construction, recursive dependency discovery, independent review, and reconciliation, while preserving provenance and protecting approved declarations. A shared agent framework supports long-horizon execution through tool use, context compaction, review-gated termination, section-level source context, and dependency-aware batch parallelization. Applying FormaTheoria to major components of the Classification of Finite Simple Groups (CFSG), we construct a machine-checked Lean development extending through the Bender--Suzuki theorem and encompassing the Feit--Thompson Odd Order Theorem, Glauberman's Z^* theorem, and the Brauer--Suzuki theorem. This development verifies an extensive body of deeply interdependent finite-group theory while providing a foundation for continuing the CFSG formalization. An empirical analysis of the code and recorded construction process supports the practical relevance of the identified challenges and illustrates the roles of the corresponding workflow components. Together, these results demonstrate how AI-assisted workflows can reconstruct mathematically significant formal theories from distributed literature by combining language-model agents with formal verification, structured review, and explicit dependency management.

Most existing Large Language Model (LLM)-based Multi-Agent Systems (MAS) rely on predefined workflows, where human engineers enumerate task states in advance and specify routing rules and contextual injections accordingly. Such workflow-driven designs are essentially rule-based decision trees, which suffer from two fundamental limitations: they require substantial manual effort to anticipate and encode possible task states, and they cannot exhaustively cover the state space of complex real-world tasks. To address these issues, we propose an Information-Flow-Orchestrated Multi-Agent Paradigm via Agent-to-Agent (A2A) Communication from CORAL, in which a dedicated information flow orchestrator continuously monitors task progress and dynamically coordinates other agents through the A2A toolkit using natural language, without relying on predefined workflows. We evaluate our approach on the general-purpose benchmark GAIA, using the representative workflow-based MAS OWL as the baseline while controlling for agent roles and underlying models. Under the pass@1 setting, our method achieves 63.64% accuracy, outperforming OWL's 55.15% by 8.49 percentage points with comparable token consumption. Further case-level analysis shows that our paradigm enables more flexible task monitoring and more robust handling of edge cases. Our implementation is publicly available at: https://github.com/Coral-Protocol/Beyond-Rule-Based-Workflows

Modern agentic workflows decompose complex tasks into specialized subtasks and route them to diverse models to minimize cost without sacrificing quality. However, current routing architectures focus exclusively on performance optimization, leaving underlying trade-offs between model capability and cost unrecorded. Without clear rationale, developers cannot distinguish between intelligent efficiency -- using specialized models for appropriate tasks -- and latent failures caused by budget-driven model selection. We present Topaz, a framework that introduces formal auditability to agentic routing. Topaz replaces silent model assignments with an inherently interpretable router that incorporates three components: (i) skill-based profiling that synthesizes performance across diverse benchmarks into granular capability profiles (ii) fully traceable routing algorithms that utilize budget-based and multi-objective optimization to produce clear traces of how skill-match scores were weighed against costs, and (iii) developer-facing explanations that translate these traces into natural language, allowing users to audit system logic and iteratively tune the cost-quality tradeoff. By making routing decisions interpretable, Topaz enables users to understand, trust, and meaningfully steer routed agentic systems.

Reinforcement learning (RL) has become a pivotal technology in the post-training phase of large language models (LLMs). Traditional task-colocated RL frameworks suffer from significant scalability bottlenecks, while task-separated RL frameworks face challenges in complex dataflows and the corresponding resource idling and workload imbalance. Moreover, most existing frameworks are tightly coupled with LLM training or inference engines, making it difficult to support custom-designed engines. To address these challenges, we propose AsyncFlow, an asynchronous streaming RL framework for efficient post-training. Specifically, we introduce a distributed data storage and transfer module that provides a unified data management and fine-grained scheduling capability in a fully streamed manner. This architecture inherently facilitates automated pipeline overlapping among RL tasks and dynamic load balancing. Moreover, we propose a producer-consumer-based asynchronous workflow engineered to minimize computational idleness by strategically deferring parameter update process within staleness thresholds. Finally, the core capability of AsynFlow is architecturally decoupled from underlying training and inference engines and encapsulated by service-oriented user interfaces, offering a modular and customizable user experience. Extensive experiments demonstrate an average of 1.59 throughput improvement compared with state-of-the-art baseline. The presented architecture in this work provides actionable insights for next-generation RL training system designs.

As the capability frontier of autonomous agents continues to expand, they are increasingly able to complete specialized tasks through plug-and-play external skills. Yet current benchmarks mostly test whether models can use provided skills, leaving open whether they can discover skills from experience, repair them after failure, and maintain a coherent library over time. We introduce SkillFlow, a benchmark of 166 tasks across 20 families in which task construction within each family follows a Domain-Agnostic Execution Flow (DAEF) that defines an agent workflow framework, allowing these tasks to share a consistent workflow. Agents are evaluated under an Agentic Lifelong Learning protocol in which they begin without skills, solve tasks sequentially within each family, externalize lessons through trajectory- and rubric-driven skill patches, and carry the updated library forward. Experiments reveal a substantial capability gap. For Claude Opus 4.6, lifelong skill evolution improves task success from 62.65% to 71.08% (+8.43 points). However, high skill usage does not necessarily imply high utility: Kimi K2.5 gains only +0.60 points despite 66.87% skill usage, while Qwen-Coder-Next reaches only a 44.58% task completion rate and still regresses relative to the vanilla setting. SkillFlow contributes a structured testbed for this direction and an in-depth empirical analysis of skill discovery, patching, transfer, and their failure modes under lifelong evaluation.

The performance of LLM-based agents depends not only on the agent itself but also on the quality of the tool interfaces it consumes. While prior work has focused heavily on agent fine-tuning, tool interfaces-including natural language descriptions and parameter schemas-remain largely human-oriented and often become a bottleneck, especially when agents must select from large candidate tool sets. Existing approaches to improving tool interfaces rely on execution traces, which are frequently unavailable in cold-start or privacy-constrained settings, and typically optimize each tool independently, limiting scalability and generalization to unseen tools. We propose Trace-Free+, a curriculum learning framework that progressively transfers supervision from trace-rich settings to trace-free deployment, encouraging the model to abstract reusable interface-usage patterns and tool usage outcomes. To support this approach, we construct a large-scale dataset of high-quality tool interfaces using a structured workflow over a diverse collection of tools. Experiments on StableToolBench and RestBench show consistent gains on unseen tools, strong cross-domain generalization, and robustness as the number of candidate tools scales to over 100, demonstrating that tool interface optimization is a practical and deployable complement to agent fine-tuning.

Routing to select large language models (LLMs) with different cost-quality trade-offs has become a fundamental deployment feature of enterprise AI. Existing routers, primarily make independent routing decisions for each LLM call. However, agentic applications execute as long-horizon workflows whose quality is determined only by a delayed, task-level outcome. This mismatch prevents per-call routers from correctly attributing feedback to individual routing decisions. Towards mitigating this, we present TRACE-Router, a task-level routing framework that aligns routing with the unit of supervision. TRACE-Router assigns each task to a model once at admission using a contextual bandit, pins all subsequent LLM calls to the selected backend, and updates its policy using the task's terminal reward, jointly accounting for accuracy and latency. By leveraging delayed task feedback, TRACE-Router learns routing policies that adapt to the workload while avoiding explicit task-complexity estimation. Across three agentic benchmarks, TRACE-Router consistently improves the accuracy-latency trade-off, achieving non-dominated Pareto frontier points. On tau2-Bench, it outperforms latency-matched interpolation between individual models by 7-8 accuracy points, while on Terminal-Bench it achieves 7.1 higher accuracy points than the strongest single model baseline with 36% lower latency.

Large Language Model (LLM)-empowered multi-agent systems extend the cognitive boundaries of individual agents through disciplined collaboration and interaction, while constructing these systems often requires labor-intensive manual designs. Despite the availability of methods to automate the design of agentic workflows, they typically seek to identify a static, complex, one-size-fits-all system, which, however, fails to dynamically allocate inference resources based on the difficulty and domain of each query. To address this challenge, we shift away from the pursuit of a monolithic agentic system, instead optimizing the agentic supernet, a probabilistic and continuous distribution of agentic architectures. We introduce MaAS, an automated framework that samples query-dependent agentic systems from the supernet, delivering high-quality solutions and tailored resource allocation (e.g., LLM calls, tool calls, token cost). Comprehensive evaluation across six benchmarks demonstrates that MaAS (I) requires only 6sim45% of the inference costs of existing handcrafted or automated multi-agent systems, (II) surpasses them by 0.54%sim11.82%, and (III) enjoys superior cross-dataset and cross-LLM-backbone transferability.

Tool learning empowers large language models (LLMs) as agents to use external tools to extend their capability. Existing methods employ one single LLM-based agent to iteratively select and execute tools, thereafter incorporating the result into the next action prediction. However, they still suffer from potential performance degradation when addressing complex tasks due to: (1) the limitation of the inherent capability of a single LLM to perform diverse actions, and (2) the struggle to adaptively correct mistakes when the task fails. To mitigate these problems, we propose the ConAgents, a Cooperative and interactive Agents framework, which modularizes the workflow of tool learning into Grounding, Execution, and Observing agents. We also introduce an iterative calibration (IterCali) method, enabling the agents to adapt themselves based on the feedback from the tool environment. Experiments conducted on three datasets demonstrate the superiority of our ConAgents (e.g., 6 point improvement over the SOTA baseline). We further provide fine-granularity analysis for the efficiency and consistency of our framework.

With the development and widespread application of large language models (LLMs), the new paradigm of "Model as Product" is rapidly evolving, and demands higher capabilities to address complex user needs, often requiring precise workflow execution which involves the accurate understanding of multiple tasks. However, existing benchmarks focusing on single-task environments with limited constraints lack the complexity required to fully reflect real-world scenarios. To bridge this gap, we present the Extremely Complex Instruction Following Benchmark (EIFBENCH), meticulously crafted to facilitate a more realistic and robust evaluation of LLMs. EIFBENCH not only includes multi-task scenarios that enable comprehensive assessment across diverse task types concurrently, but also integrates a variety of constraints, replicating complex operational environments. Furthermore, we propose the Segment Policy Optimization (SegPO) algorithm to enhance the LLM's ability to accurately fulfill multi-task workflow. Evaluations on EIFBENCH have unveiled considerable performance discrepancies in existing LLMs when challenged with these extremely complex instructions. This finding underscores the necessity for ongoing optimization to navigate the intricate challenges posed by LLM applications.

While powerful, the inherent non-determinism of large language model (LLM) agents limits their application in structured operational environments where procedural fidelity and predictable execution are strict requirements. This limitation stems from current architectures that conflate probabilistic, high-level planning with low-level action execution within a single generative process. To address this, we introduce the Source Code Agent framework, a new paradigm built on the "Blueprint First, Model Second" philosophy. Our framework decouples the workflow logic from the generative model. An expert-defined operational procedure is first codified into a source code-based Execution Blueprint, which is then executed by a deterministic engine. The LLM is strategically invoked as a specialized tool to handle bounded, complex sub-tasks within the workflow, but never to decide the workflow's path. We conduct a comprehensive evaluation on the challenging tau-bench benchmark, designed for complex user-tool-rule scenarios. Our results demonstrate that the Source Code Agent establishes a new state-of-the-art, outperforming the strongest baseline by 10.1 percentage points on the average Pass^1 score while dramatically improving execution efficiency. Our work enables the verifiable and reliable deployment of autonomous agents in applications governed by strict procedural logic.

Large language models (LLMs) have demonstrated exceptional reasoning capabilities, enabling them to solve various complex problems. Recently, this ability has been applied to the paradigm of tool learning. Tool learning involves providing examples of tool usage and their corresponding functions, allowing LLMs to formulate plans and demonstrate the process of invoking and executing each tool. LLMs can address tasks that they cannot complete independently, thereby enhancing their potential across different tasks. However, this approach faces two key challenges. First, redundant error correction leads to unstable planning and long execution time. Additionally, designing a correct plan among multiple tools is also a challenge in tool learning. To address these issues, we propose Tool-Planner, a task-processing framework based on toolkits. Tool-Planner groups tools based on the API functions with the same function into a toolkit and allows LLMs to implement planning across the various toolkits. When a tool error occurs, the language model can reselect and adjust tools based on the toolkit. Experiments show that our approach demonstrates a high pass and win rate across different datasets and optimizes the planning scheme for tool learning in models such as GPT-4 and Claude 3, showcasing the potential of our method.

Agentic AI enables LLM to dynamically reason, plan, and interact with tools to solve complex tasks. However, agentic workflows often require many iterative reasoning steps and tool invocations, leading to significant operational expense, end-to-end latency and failures due to hallucinations. This work introduces Agent Workflow Optimization (AWO), a framework that identifies and optimizes redundant tool execution patterns to improve the efficiency and robustness of agentic workflows. AWO analyzes existing workflow traces to discover recurring sequences of tool calls and transforms them into meta-tools, which are deterministic, composite tools that bundle multiple agent actions into a single invocation. Meta-tools bypass unnecessary intermediate LLM reasoning steps and reduce operational cost while also shortening execution paths, leading to fewer failures. Experiments on two agentic AI benchmarks show that AWO reduces the number of LLM calls up to 11.9% while also increasing the task success rate by up to 4.2 percent points.

Automating enterprise workflows could unlock $4 trillion/year in productivity gains. Despite being of interest to the data management community for decades, the ultimate vision of end-to-end workflow automation has remained elusive. Current solutions rely on process mining and robotic process automation (RPA), in which a bot is hard-coded to follow a set of predefined rules for completing a workflow. Through case studies of a hospital and large B2B enterprise, we find that the adoption of RPA has been inhibited by high set-up costs (12-18 months), unreliable execution (60% initial accuracy), and burdensome maintenance (requiring multiple FTEs). Multimodal foundation models (FMs) such as GPT-4 offer a promising new approach for end-to-end workflow automation given their generalized reasoning and planning abilities. To study these capabilities we propose ECLAIR, a system to automate enterprise workflows with minimal human supervision. We conduct initial experiments showing that multimodal FMs can address the limitations of traditional RPA with (1) near-human-level understanding of workflows (93% accuracy on a workflow understanding task) and (2) instant set-up with minimal technical barrier (based solely on a natural language description of a workflow, ECLAIR achieves end-to-end completion rates of 40%). We identify human-AI collaboration, validation, and self-improvement as open challenges, and suggest ways they can be solved with data management techniques. Code is available at: https://github.com/HazyResearch/eclair-agents

We study a class of emergent misalignment in multi-agent systems (MAS), with a focus on automated workflows, which we refer to agentic misalignment. Although these systems can solve complex tasks, they often fail because agents act according to implicit proxy utilities that do not align with the intended human goals. We formally define these behaviors and analyze them within a Bayesian framework, showing that generic utilities naturally lead to posterior collapse of agents in automated workflows. To address this issue, we propose Agentic Evidence Attribution (AEA), a novel alignment paradigm that improves agent posteriors using context-specific evidence. AEA reasons over agent actions and provides structured evidence to correct misaligned behavior during collaboration. To better understand the role of evidence, we study two instantiations of AEA: self-reflection (internal evidence from the model) and weak-to-strong generalization (external evidence on the agentic trajectory). We show that a small evidence model effectively aligns the MAS by providing orthogonal failure attribution. Our results clarify the sources of agentic misalignment in automated workflows and show that evidence-based alignment can effectively improve agent collaboration and leads to reliable multi-agent systems built on automated workflows.

Code efficiency is a fundamental aspect of software quality, yet how to harness large language models (LLMs) to optimize programs remains challenging. Prior approaches have sought for one-shot rewriting, retrieved exemplars, or prompt-based search, but they do not explicitly distill reusable optimization knowledge, which limits generalization beyond individual instances. In this paper, we present EffiSkill, a framework for code-efficiency optimization that builds a portable optimization toolbox for LLM-based agents. The key idea is to model recurring slow-to-fast transformations as reusable agent skills that capture both concrete transformation mechanisms and higher-level optimization strategies. EffiSkill adopts a two-stage design: Stage I mines Operator and Meta Skills from large-scale slow/fast program pairs to build a skill library; Stage II applies this library to unseen programs through execution-free diagnosis, skill retrieval, plan composition, and candidate generation, without runtime feedback. Results on EffiBench-X show that EffiSkill achieves higher optimization success rates, improving over the strongest baseline by 3.69 to 12.52 percentage points across model and language settings. These findings suggest that mechanism-level skill reuse provides a useful foundation for execution-free code optimization, and that the resulting skill library can serve as a reusable resource for broader agent workflows.

Agentic tasks, which require multi-step problem solving with autonomy, tool use, and adaptive reasoning, are becoming increasingly central to the advancement of NLP and AI. However, existing instruction data lacks tool interaction, and current agentic benchmarks rely on costly human annotation, limiting their scalability. We introduce TaskCraft, an automated workflow for generating difficulty-scalable, multi-tool, and verifiable agentic tasks with execution trajectories. TaskCraft expands atomic tasks using depth-based and width-based extensions to create structurally and hierarchically complex challenges. Empirical results show that these tasks improve prompt optimization in the generation workflow and enhance supervised fine-tuning of agentic foundation models. We present a large-scale synthetic dataset of approximately 36,000 tasks with varying difficulty to support future research on agent tuning and evaluation.

Large language model agents can adapt to complex tasks by constructing workflows at inference time, but procedures discovered in one episode are usually discarded after execution. Existing skill libraries provide reusable executable routines, but are typically assembled offline and do not grow from the agent's own workflows. We introduce FlowEvo, a training-free framework in which workflows and skills co-evolve at inference time. FlowEvo compiles successful workflows into callable skills, stores them in a persistent bank, and uses retrieved skills either through direct execution or as context for constructing new workflows. It also tracks each skill's downstream utility and suppresses skills that cause negative transfer. Using a shared GPT-4o-mini backbone, FlowEvo achieves the highest accuracy among 8 baselines on the full standard splits of ALFWorld, HumanEval, MBPP, GSM8K, and MATH-500. On ALFWorld, it reaches 85.6%, 26.4 points above the strongest baseline, while using roughly one third as many tokens. Across 10 base models spanning 7B to 671B parameters, FlowEvo outperforms ExpeL in 49 of 50 model-dataset comparisons. Code is available at https://github.com/DEFENSE-SEU/FlowEvo.

Agentic workflows have emerged as a powerful paradigm for solving complex, multi-stage tasks, but serving them at scale is computationally expensive given the many LLM inferences that each request must pass through. Configuration selection, or the cost-aware assignment of workflow agents to specific LLMs, can reduce these costs, but existing approaches bind configuration decisions before request execution, making them ill-suited for the heterogeneous and lengthy execution of workflows. Specifically, system loads can fluctuate rapidly and substantially during a request's lifetime, causing fixed configurations to quickly become suboptimal. We present Aragog, a system that progressively adapts a request's configuration throughout its execution to match runtime dynamics. To make this practical despite the massive space of workflow configurations, Aragog decouples the problem into two core elements -- a one-time routing step that identifies all accuracy-preserving configurations, and a cheap per-stage scheduler that selects among them using up-to-date system observations -- and introduces novel strategies to accelerate each. Across diverse workflows and model families, Aragog increases maximum serving throughput by 50.0--217.0\% and reduces median latency by 32.5--78.9\% at peak request rates, while maintaining accuracy comparable to the most expensive configurations.

Text-to-image models like stable diffusion and DALLE-3 still struggle with multi-turn image editing. We decompose such a task as an agentic workflow (path) of tool use that addresses a sequence of subtasks by AI tools of varying costs. Conventional search algorithms require expensive exploration to find tool paths. While large language models (LLMs) possess prior knowledge of subtask planning, they may lack accurate estimations of capabilities and costs of tools to determine which to apply in each subtask. Can we combine the strengths of both LLMs and graph search to find cost-efficient tool paths? We propose a three-stage approach "CoSTA*" that leverages LLMs to create a subtask tree, which helps prune a graph of AI tools for the given task, and then conducts A* search on the small subgraph to find a tool path. To better balance the total cost and quality, CoSTA* combines both metrics of each tool on every subtask to guide the A* search. Each subtask's output is then evaluated by a vision-language model (VLM), where a failure will trigger an update of the tool's cost and quality on the subtask. Hence, the A* search can recover from failures quickly to explore other paths. Moreover, CoSTA* can automatically switch between modalities across subtasks for a better cost-quality trade-off. We build a novel benchmark of challenging multi-turn image editing, on which CoSTA* outperforms state-of-the-art image-editing models or agents in terms of both cost and quality, and performs versatile trade-offs upon user preference.

Prompt routing dynamically selects the most appropriate large language model from a pool of candidates for each query, optimizing performance while managing costs. As model pools scale to include dozens of frontier models with narrow performance gaps, existing approaches face significant challenges: manually defined task taxonomies cannot capture fine-grained capability distinctions, while monolithic routers struggle to differentiate subtle differences across diverse tasks. We propose a two-stage routing architecture that addresses these limitations through automated fine-grained task discovery and task-aware quality estimation. Our first stage employs graph-based clustering to discover latent task types and trains a classifier to assign prompts to discovered tasks. The second stage uses a mixture-of-experts architecture with task-specific prediction heads for specialized quality estimates. At inference, we aggregate predictions from both stages to balance task-level stability with prompt-specific adaptability. Evaluated on 10 benchmarks with 11 frontier models, our method consistently outperforms existing baselines and surpasses the strongest individual model while incurring less than half its cost.

Large language model (LLM) agents often handle streams of related tasks, yet standard harnesses repeatedly ask the model to reconstruct the same control decisions inside each task's context. We study whether task feedback can instead turn recurring control into reusable executable code, while reserving LLM calls for task-specific semantic reasoning. We introduce Growing Harness, a failure-guided training paradigm that learns the agent harness itself from a strategy-free scaffold that exposes fixed model and tool interfaces but encodes no task-solving controller. Function-level execution traces localize each failure to a bounded code surface, an optimizer repairs a window of failures jointly, and a success-first held-out gate rolls back repair sequences that harm prior capability. Accepted edits accumulate in one shared harness, allowing its control structure to emerge from task feedback. Across BrowseComp-Plus and WebArena-Verified with three deployment models from 4B to 120B parameters, Growing Harness achieves the highest mean success in five of six benchmark-model settings and trails the best mean by 0.7 pp. in the sixth. Relative to a Tool-Calling agent, it reduces LLM calls by 76.0-91.8% and deployed-agent inference cost by 74.4-98.6%. On WebArena-Verified, its success remains 44.7-45.3% across model scales, whereas Tool-Calling falls to 6.7% with the 4B model. Ablations show that trace-local edits, joint repair, and gate-based rollback each improve final success. These results show that persistent program growth can move recurring control out of model context and into low-cost code, yielding reusable specialist agents that remain effective with smaller deployment models.

Large foundation models have demonstrated a great ability to achieve general human-level intelligence far beyond traditional approaches. As the technique keeps attracting attention from the AI community, more and more large foundation models have become publically available. However, most of those models exhibit a major deficiency in specialized-task applications, where the step of finetuning is still required for obtaining satisfactory performance. As the number of available models and specialized tasks keeps growing, the job of general finetuning becomes highly nontrivial. In this paper, we take the first step to address this issue. We introduce an extensible and lightweight toolkit, LMFlow, which aims to simplify the finetuning and inference of general large foundation models. LMFlow offers a complete finetuning workflow for a large foundation model to support personalized training with limited computing resources. Furthermore, it supports continuous pretraining, instruction tuning, parameter-efficient finetuning, alignment tuning, and large model inference, along with carefully designed and extensible APIs. This toolkit has been thoroughly tested and is available at https://github.com/OptimalScale/LMFlow.

Understanding food recipe requires anticipating the implicit causal effects of cooking actions, such that the recipe can be converted into a graph describing the temporal workflow of the recipe. This is a non-trivial task that involves common-sense reasoning. However, existing efforts rely on hand-crafted features to extract the workflow graph from recipes due to the lack of large-scale labeled datasets. Moreover, they fail to utilize the cooking images, which constitute an important part of food recipes. In this paper, we build MM-ReS, the first large-scale dataset for cooking workflow construction, consisting of 9,850 recipes with human-labeled workflow graphs. Cooking steps are multi-modal, featuring both text instructions and cooking images. We then propose a neural encoder-decoder model that utilizes both visual and textual information to construct the cooking workflow, which achieved over 20% performance gain over existing hand-crafted baselines.

Recently, tool learning with large language models (LLMs) has emerged as a promising paradigm for augmenting the capabilities of LLMs to tackle highly complex problems. Despite growing attention and rapid advancements in this field, the existing literature remains fragmented and lacks systematic organization, posing barriers to entry for newcomers. This gap motivates us to conduct a comprehensive survey of existing works on tool learning with LLMs. In this survey, we focus on reviewing existing literature from the two primary aspects (1) why tool learning is beneficial and (2) how tool learning is implemented, enabling a comprehensive understanding of tool learning with LLMs. We first explore the "why" by reviewing both the benefits of tool integration and the inherent benefits of the tool learning paradigm from six specific aspects. In terms of "how", we systematically review the literature according to a taxonomy of four key stages in the tool learning workflow: task planning, tool selection, tool calling, and response generation. Additionally, we provide a detailed summary of existing benchmarks and evaluation methods, categorizing them according to their relevance to different stages. Finally, we discuss current challenges and outline potential future directions, aiming to inspire both researchers and industrial developers to further explore this emerging and promising area. We also maintain a GitHub repository to continually keep track of the relevant papers and resources in this rising area at https://github.com/quchangle1/LLM-Tool-Survey.