Daily Papers

Large Language Models (LLMs) show promise as data analysis agents, but existing benchmarks overlook the iterative nature of the field, where experts' decisions evolve with deeper insights of the dataset. To address this, we introduce IDA-Bench, a novel benchmark evaluating LLM agents in multi-round interactive scenarios. Derived from complex Kaggle notebooks, tasks are presented as sequential natural language instructions by an LLM-simulated user. Agent performance is judged by comparing its final numerical output to the human-derived baseline. Initial results show that even state-of-the-art coding agents (like Claude-3.7-thinking) succeed on < 50% of the tasks, highlighting limitations not evident in single-turn tests. This work underscores the need to improve LLMs' multi-round capabilities for building more reliable data analysis agents, highlighting the necessity of achieving a balance between instruction following and reasoning.

As autonomous agents become adept at understanding and interacting with graphical user interface (GUI) environments, a new era of automated task execution is emerging. Recent studies have demonstrated that Reinforcement Learning (RL) can effectively enhance agents' performance in dynamic interactive GUI environments. However, these methods face two key limitations: (1) they overlook the significant variation in difficulty across different GUI tasks by treating the entire training data as a uniform set, which hampers the agent's ability to adapt its learning process; and (2) most approaches collapse task-specific nuances into a single, coarse reward, leaving the agent with a uniform signal that yields inefficient policy updates. To address these limitations, we propose CRAFT-GUI, a curriculum learning framework based on Group Relative Policy Optimization (GRPO) that explicitly accounts for the varying difficulty across trajectories. To enable more fine-grained policy optimization, we design a reward function that combines simple rule-based signals with model-judged evaluation, providing richer and more nuanced feedback during training. Experimental results demonstrate that our method achieves significant improvements over previous state-of-the-art approaches, outperforming them by 5.6% on public benchmarks Android Control and 10.3% on our internal online benchmarks, respectively. These findings empirically validate the effectiveness of integrating reinforcement learning with curriculum learning in GUI interaction tasks.

We introduce an open-source system called SIGMA (short for "Situated Interactive Guidance, Monitoring, and Assistance") as a platform for conducting research on task-assistive agents in mixed-reality scenarios. The system leverages the sensing and rendering affordances of a head-mounted mixed-reality device in conjunction with large language and vision models to guide users step by step through procedural tasks. We present the system's core capabilities, discuss its overall design and implementation, and outline directions for future research enabled by the system. SIGMA is easily extensible and provides a useful basis for future research at the intersection of mixed reality and AI. By open-sourcing an end-to-end implementation, we aim to lower the barrier to entry, accelerate research in this space, and chart a path towards community-driven end-to-end evaluation of large language, vision, and multimodal models in the context of real-world interactive applications.

Recent advances in GUI agents have achieved remarkable grounding and action-prediction performance, yet existing models struggle with unreliable reward signals and limited online trajectory generation. In this paper, we introduce Orcust, a framework that integrates Principle-Constrained Reward Modeling (PCRM) and Online VM-Grounded Trajectory Construction (OVTC) to enhance reasoning reliability and data efficiency in interactive GUI tasks. We leverages environment-verifiable and LLM-derived principle to enforce interpretable reward signals that constrain long chain-of-thought reasoning and rule-based feedback. OVTC spins up instrumented virtual machines to autonomously collect structured GUI interaction trajectories with explicit procedural and structural objectives, enabling the training of a stepwise reward model that robustly captures human preferences and adheres to task-specific constraints. Extensive experiments on standard GUI benchmarks covering perceptual grounding, foundational operations, and end-to-end task execution reveal that Orcust achieves state-of-the-art performance, improving by 22.2\% on ScreenSpot and 23.9\% on ScreenSpot-Pro over the base model (i.e. Qwen2.5-VL-7B). The results demonstrate Orcust's effectiveness in enhancing the reasoning, adaptability and scalability of GUI agents across various environments and task complexities.

With ChatGPT-like large language models (LLM) prevailing in the community, how to evaluate the ability of LLMs is an open question. Existing evaluation methods suffer from following shortcomings: (1) constrained evaluation abilities, (2) vulnerable benchmarks, (3) unobjective metrics. We suggest that task-based evaluation, where LLM agents complete tasks in a simulated environment, is a one-for-all solution to solve above problems. We present AgentSims, an easy-to-use infrastructure for researchers from all disciplines to test the specific capacities they are interested in. Researchers can build their evaluation tasks by adding agents and buildings on an interactive GUI or deploy and test new support mechanisms, i.e. memory, planning and tool-use systems, by a few lines of codes. Our demo is available at https://agentsims.com .

The development of autonomous agents increasingly relies on Multimodal Language Models (MLMs) to perform tasks described in natural language with GUI environments, such as websites, desktop computers, or mobile phones. Existing benchmarks for MLM agents in interactive environments are limited by their focus on a single environment, lack of detailed and generalized evaluation methods, and the complexities of constructing tasks and evaluators. To overcome these limitations, we introduce Crab, the first agent benchmark framework designed to support cross-environment tasks, incorporating a graph-based fine-grained evaluation method and an efficient mechanism for task and evaluator construction. Our framework supports multiple devices and can be easily extended to any environment with a Python interface. Leveraging Crab, we developed a cross-platform Crab Benchmark-v0 comprising 100 tasks in computer desktop and mobile phone environments. We evaluated four advanced MLMs using different single and multi-agent system configurations on this benchmark. The experimental results demonstrate that the single agent with GPT-4o achieves the best completion ratio of 35.26%. All framework code, agent code, and task datasets are publicly available at https://github.com/camel-ai/crab.

Recent advances in AI-assisted programming have empowered agents to execute complex workflows via command-line interfaces, however, existing benchmarks are limited by short task horizons, data contamination from GitHub scraping, and a lack of fine-grained evaluation metrics, fail to rigorously evaluate the long-horizon planning and execution capabilities essential for realistic software engineering. To address these gaps, we introduce LongCLI-Bench, a comprehensive benchmark designed to evaluate agentic capabilities across long-horizon, realistic tasks. We curated 20 high-quality, long-horizon tasks from over 1,000 computer science assignments and real-world workflows, covering four engineering categories: from scratch, feature addition, bug fixing, and refactoring. We propose a dual-set testing protocol for LongCLI-Bench, which measures requirement fulfillment (fail-to-pass) and regression avoidance (pass-to-pass), and incorporates step-level scoring to pinpoint execution failures. Extensive experiments reveal that even state-of-the-art agents achieve pass rates below 20% in LongCLI-Bench. Step-level analysis further indicates that the majority of tasks stall at less than 30% completion, highlighting that critical failures often occur in the early stages. Although self-correction offers marginal gains, human-agent collaboration through plan injection and interactive guidance yields significantly higher improvements. These results highlight that future research must emphasize the development of synergistic human-agent workflows alongside advances in agents' planning and execution capabilities to overcome key challenges in long-horizon task performance.

Recent advancements in parallel simulation and successful robotic applications are spurring a resurgence in sampling-based model predictive control. To build on this progress, however, the robotics community needs common tooling for prototyping, evaluating, and deploying sampling-based controllers. We introduce Judo, a software package designed to address this need. To facilitate rapid prototyping and evaluation, Judo provides robust implementations of common sampling-based MPC algorithms and standardized benchmark tasks. It further emphasizes usability with simple but extensible interfaces for controller and task definitions, asynchronous execution for straightforward simulation-to-hardware transfer, and a highly customizable interactive GUI for tuning controllers interactively. While written in Python, the software leverages MuJoCo as its physics backend to achieve real-time performance, which we validate across both consumer and server-grade hardware. Code at https://github.com/bdaiinstitute/judo.

Education represents one of the most promising real-world applications for Large Language Models (LLMs). However, conventional tutoring systems rely on static pre-training knowledge that lacks adaptation to individual learners, while existing RAG-augmented systems fall short in delivering personalized, guided feedback. To bridge this gap, we present DeepTutor, an agent-native open-source framework for personalized tutoring where every feature shares a common personalization substrate. We propose a hybrid personalization engine that couples static knowledge grounding with dynamic multi-resolution memory, distilling interaction history into a continuously evolving learner profile. Moreover, we construct a closed tutoring loop that bidirectionally couples citation-grounded problem solving with difficulty-calibrated question generation. The personalization substrate further supports collaborative writing, multi-agent deep research, and interactive guided learning, enabling cross-modality coherence. To move beyond reactive interfaces, we introduce TutorBot, a proactive multi-agent layer that deploys tutoring capabilities through extensible skills and unified multi-channel access, providing consistent experience across platforms. To better evaluate such tutoring systems, we construct TutorBench, a student-centric benchmark with source-grounded learner profiles and a first-person interactive protocol that measures adaptive tutoring from the learner's perspective. We further evaluate foundational agentic reasoning abilities across five authoritative benchmarks. Experiments show that DeepTutor improves personalized tutoring quality while maintaining general agentic reasoning abilities. We hope DeepTutor provides unique insights into next-generation AI-powered and personalized tutoring systems for the community.

Creating high-quality anime illustrations presents notable challenges, particularly for beginners, due to the intricate styles and fine details inherent in anime art. We present an interactive drawing guidance system specifically designed for anime illustrations to address this issue. It offers real-time guidance to help users refine their work and streamline the creative process. Our system is built upon the StreamDiffusion pipeline to deliver real-time drawing assistance. We fine-tune Stable Diffusion with LoRA to synthesize anime style RGB images from user-provided hand-drawn sketches and prompts. Leveraging the Informative Drawings model, we transform these RGB images into rough sketches, which are further refined into structured guidance sketches using a custom-designed optimizer. The proposed system offers precise, real-time guidance aligned with the creative intent of the user, significantly enhancing both the efficiency and accuracy of the drawing process. To assess the effectiveness of our approach, we conducted a user study, gathering empirical feedback on both system performance and interface usability.

Scalable Vector Graphics (SVGs) are fundamental to digital design and robot control, encoding not only visual structure but also motion paths in interactive drawings. In this work, we introduce RoboSVG, a unified multimodal framework for generating interactive SVGs guided by textual, visual, and numerical signals. Given an input query, the RoboSVG model first produces multimodal guidance, then synthesizes candidate SVGs through dedicated generation modules, and finally refines them under numerical guidance to yield high-quality outputs. To support this framework, we construct RoboDraw, a large-scale dataset of one million examples, each pairing an SVG generation condition (e.g., text, image, and partial SVG) with its corresponding ground-truth SVG code. RoboDraw dataset enables systematic study of four tasks, including basic generation (Text-to-SVG, Image-to-SVG) and interactive generation (PartialSVG-to-SVG, PartialImage-to-SVG). Extensive experiments demonstrate that RoboSVG achieves superior query compliance and visual fidelity across tasks, establishing a new state of the art in versatile SVG generation. The dataset and source code of this project will be publicly available soon.

While multimodal Large Language Models (MLLMs) excel at offline video understanding, an interesting question of how far they are from serving as a real-time procedural coach remains unknown. Such a role typically requires an MLLM to continuously monitor the execution, detect mistakes, and provide corrective guidance in a closed-loop interaction. In this paper, we construct GuideMe, the first multi-domain benchmark for streaming video that supports training and evaluation of MLLMs for closed-loop interactive task guidance. It comprises 2,458 videos spanning 223.7 hours across diverse domains (\eg, cooking, object manipulation, daily-life guidance, and fitness), with 47,775 interaction samples covering next-step instructions, completion feedback, error detection, and corrective guidance. To evaluate existing models on GuideMe, we design a three-component assessment framework to measure the capabilities of representative MLLMs, which consists of temporal-semantic bipartite matching for sequence-level alignment, behavioral classification for intervention timing, and LLM-as-a-Judge for content quality. Extensive experiments highlight a critical performance asymmetry: despite excelling at providing instructions, existing MLLMs consistently fail to identify execution errors and respond with corrective feedback. Code and data are released at https://fawnliu.github.io/project/guideme.

Video understanding is a fundamental capability for multimodal intelligence, and recent Multimodal Large Language Models (MLLMs) have achieved remarkable performance on Video Question Answering (VideoQA) benchmarks. However, existing benchmarks primarily evaluate whether models can perceive shallow visual cues, while rarely examining whether MLLMs can learn deeper knowledge or procedural skills from video tutorials and generalize them to downstream long-horizon agentic tasks. To address this gap, we introduce VG-GUIBench (Video-Guided GUI Benchmark), a new benchmark designed to evaluate whether MLLM-based GUI agents can follow video tutorials to complete corresponding GUI interactive tasks. Furthermore, we observe that the performance of models on both VideoQA and video-guided agentic tasks critically depends on effective keyframe extraction. Based on this observation, we propose TASKER (Task-driven And Scene-aware Keyframe searchER), a keyframe extraction algorithm that jointly considers task relevance and scene dynamics to identify informative frames. Experimental results demonstrate that TASKER achieves significant performance improvements on both VideoQA and video-guided agentic task benchmarks, outperforming the best baseline by 2.0% on the EgoSchema fullset and 1.8% on the NExT-QA dataset, respectively. These results further highlight the potential of generalized keyframe extraction methods for video understanding tasks. Our code and data are available at https://github.com/VG-GUI-TASKER/VG-GUI-TASKER.

In this paper, we focus on image inpainting task, aiming at recovering the missing area of an incomplete image given the context information. Recent development in deep generative models enables an efficient end-to-end framework for image synthesis and inpainting tasks, but existing methods based on generative models don't exploit the segmentation information to constrain the object shapes, which usually lead to blurry results on the boundary. To tackle this problem, we propose to introduce the semantic segmentation information, which disentangles the inter-class difference and intra-class variation for image inpainting. This leads to much clearer recovered boundary between semantically different regions and better texture within semantically consistent segments. Our model factorizes the image inpainting process into segmentation prediction (SP-Net) and segmentation guidance (SG-Net) as two steps, which predict the segmentation labels in the missing area first, and then generate segmentation guided inpainting results. Experiments on multiple public datasets show that our approach outperforms existing methods in optimizing the image inpainting quality, and the interactive segmentation guidance provides possibilities for multi-modal predictions of image inpainting.

AI agents have drawn increasing attention mostly on their ability to perceive environments, understand tasks, and autonomously achieve goals. To advance research on AI agents in mobile scenarios, we introduce the Android Multi-annotation EXpo (AMEX), a comprehensive, large-scale dataset designed for generalist mobile GUI-control agents. Their capabilities of completing complex tasks by directly interacting with the graphical user interface (GUI) on mobile devices are trained and evaluated with the proposed dataset. AMEX comprises over 104K high-resolution screenshots from 110 popular mobile applications, which are annotated at multiple levels. Unlike existing mobile device-control datasets, e.g., MoTIF, AitW, etc., AMEX includes three levels of annotations: GUI interactive element grounding, GUI screen and element functionality descriptions, and complex natural language instructions, each averaging 13 steps with stepwise GUI-action chains. We develop this dataset from a more instructive and detailed perspective, complementing the general settings of existing datasets. Additionally, we develop a baseline model SPHINX Agent and compare its performance across state-of-the-art agents trained on other datasets. To facilitate further research, we open-source our dataset, models, and relevant evaluation tools. The project is available at https://yuxiangchai.github.io/AMEX/

Text-to-video generative models have made remarkable advancements in recent years. However, generating RGBA videos with alpha channels for transparency and visual effects remains a significant challenge due to the scarcity of suitable datasets and the complexity of adapting existing models for this purpose. To address these limitations, we present TransAnimate, an innovative framework that integrates RGBA image generation techniques with video generation modules, enabling the creation of dynamic and transparent videos. TransAnimate efficiently leverages pre-trained text-to-transparent image model weights and combines them with temporal models and controllability plugins trained on RGB videos, adapting them for controllable RGBA video generation tasks. Additionally, we introduce an interactive motion-guided control mechanism, where directional arrows define movement and colors adjust scaling, offering precise and intuitive control for designing game effects. To further alleviate data scarcity, we have developed a pipeline for creating an RGBA video dataset, incorporating high-quality game effect videos, extracted foreground objects, and synthetic transparent videos. Comprehensive experiments demonstrate that TransAnimate generates high-quality RGBA videos, establishing it as a practical and effective tool for applications in gaming and visual effects.

The development of the transformer-based text-to-image models are impeded by its slow generation and complexity for high-resolution images. In this work, we put forward a solution based on hierarchical transformers and local parallel auto-regressive generation. We pretrain a 6B-parameter transformer with a simple and flexible self-supervised task, Cross-modal general language model (CogLM), and finetune it for fast super-resolution. The new text-to-image system, CogView2, shows very competitive generation compared to concurrent state-of-the-art DALL-E-2, and naturally supports interactive text-guided editing on images.

Graphical User Interface (GUI) agents show promising capabilities for automating computer-use tasks and facilitating accessibility, but existing interactive benchmarks are mostly English-only, covering web-use or Windows, Linux, and Android environments, but not macOS. macOS is a major OS with distinctive GUI patterns and exclusive applications. To bridge the gaps, we present macOSWorld, the first comprehensive benchmark for evaluating GUI agents on macOS. macOSWorld features 202 multilingual interactive tasks across 30 applications (28 macOS-exclusive), with task instructions and OS interfaces offered in 5 languages (English, Chinese, Arabic, Japanese, and Russian). As GUI agents are shown to be vulnerable to deception attacks, macOSWorld also includes a dedicated safety benchmarking subset. Our evaluation on six GUI agents reveals a dramatic gap: proprietary computer-use agents lead at above 30% success rate, while open-source lightweight research models lag at below 2%, highlighting the need for macOS domain adaptation. Multilingual benchmarks also expose common weaknesses, especially in Arabic, with a 27.5% average degradation compared to English. Results from safety benchmarking also highlight that deception attacks are more general and demand immediate attention. macOSWorld is available at https://github.com/showlab/macosworld.

We present CharacterChat, a concept and chatbot to support writers in creating fictional characters. Concretely, writers progressively turn the bot into their imagined character through conversation. We iteratively developed CharacterChat in a user-centred approach, starting with a survey on character creation with writers (N=30), followed by two qualitative user studies (N=7 and N=8). Our prototype combines two modes: (1) Guided prompts help writers define character attributes (e.g. User: "Your name is Jane."), including suggestions for attributes (e.g. Bot: "What is my main motivation?") and values, realised as a rule-based system with a concept network. (2) Open conversation with the chatbot helps writers explore their character and get inspiration, realised with a language model that takes into account the defined character attributes. Our user studies reveal benefits particularly for early stages of character creation, and challenges due to limited conversational capabilities. We conclude with lessons learned and ideas for future work.

Simulating realistic user shopping behavior underpins offline evaluation and reinforcement learning in e-commerce scenarios. While recent LLM- and VLM-based simulators have made encouraging progress, reproducing a real browsing session remains difficult for two reasons. (i) Memory Challenge: a shopping session spans dozens of pages, yet existing agents either discard long-range observation histories, losing the evolving user state, or naively concatenate them, overwhelming the context window and even degrading simulation quality. (ii) Optimization Challenge: current user simulators are typically supervised to match each logged action via imitation or step-level rewards; the resulting sessions often display unrealistic patterns, such as over-exploration or excessive passivity, which per-step supervision can neither detect nor correct. To address the above challenges, we present RecVerse, a GUI-grounded simulation agent that perceives pages through screenshots and produces faithful multi-turn trajectories. For the memory challenge, RecVerse adopts a cognitive-inspired hierarchical memory: Working Memory for short-term focus, Episodic Memory for in-session traces, and Preference Memory for high-level intent, with memory updates treated as actions so that the agent adaptively learns when and what to memorize. For the optimization challenge, RecVerse is optimized with a trajectory-level RL objective that scores entire sessions, aligning both macro-level action-type distributions and micro-level shopping intent with real users. We further release USB (User Simulation Benchmark), an interactive e-commerce GUI trajectory dataset for multi-turn user simulation. Experiments show that RecVerse significantly outperforms existing baselines in both behavioral fidelity and intent consistency.

During interactive segmentation, a model and a user work together to delineate objects of interest in a 3D point cloud. In an iterative process, the model assigns each data point to an object (or the background), while the user corrects errors in the resulting segmentation and feeds them back into the model. The current best practice formulates the problem as binary classification and segments objects one at a time. The model expects the user to provide positive clicks to indicate regions wrongly assigned to the background and negative clicks on regions wrongly assigned to the object. Sequentially visiting objects is wasteful since it disregards synergies between objects: a positive click for a given object can, by definition, serve as a negative click for nearby objects. Moreover, a direct competition between adjacent objects can speed up the identification of their common boundary. We introduce AGILE3D, an efficient, attention-based model that (1) supports simultaneous segmentation of multiple 3D objects, (2) yields more accurate segmentation masks with fewer user clicks, and (3) offers faster inference. Our core idea is to encode user clicks as spatial-temporal queries and enable explicit interactions between click queries as well as between them and the 3D scene through a click attention module. Every time new clicks are added, we only need to run a lightweight decoder that produces updated segmentation masks. In experiments with four different 3D point cloud datasets, AGILE3D sets a new state-of-the-art. Moreover, we also verify its practicality in real-world setups with real user studies.

Realistic and diverse multi-agent driving scenes are crucial for evaluating autonomous vehicles, but safety-critical events which are essential for this task are rare and underrepresented in driving datasets. Data-driven scene generation offers a low-cost alternative by synthesizing complex traffic behaviors from existing driving logs. However, existing models often lack controllability or yield samples that violate physical or social constraints, limiting their usability. We present OMEGA, an optimization-guided, training-free framework that enforces structural consistency and interaction awareness during diffusion-based sampling from a scene generation model. OMEGA re-anchors each reverse diffusion step via constrained optimization, steering the generation towards physically plausible and behaviorally coherent trajectories. Building on this framework, we formulate ego-attacker interactions as a game-theoretic optimization in the distribution space, approximating Nash equilibria to generate realistic, safety-critical adversarial scenarios. Experiments on nuPlan and Waymo show that OMEGA improves generation realism, consistency, and controllability, increasing the ratio of physically and behaviorally valid scenes from 32.35% to 72.27% for free exploration capabilities, and from 11% to 80% for controllability-focused generation. Our approach can also generate 5times more near-collision frames with a time-to-collision under three seconds while maintaining the overall scene realism.

In this paper, we propose GTA-VLA(Guide, Think, Act), an interactive Vision-Language-Action (VLA) framework that enables spatially steerable embodied reasoning by allowing users to guide robot policies with explicit visual cues. Existing VLA models learn a direct "Sense-to-Act" mapping from multimodal observations to robot actions. While effective within the training distribution, such tightly coupled policies are brittle under out-of-domain (OOD) shifts and difficult to correct when failures occur. Although recent embodied Chain-of-Thought (CoT) approaches expose intermediate reasoning, they still lack a mechanism for incorporating human spatial guidance, limiting their ability to resolve visual ambiguities or recover from mistakes. To address this gap, our framework allows users to optionally guide the policy with spatial priors, such as affordance points, boxes, and traces, which the subsequent reasoning process can directly condition on. Based on these inputs, the model generates a unified spatial-visual Chain-of-Thought that integrates external guidance with internal task planning, aligning human visual intent with autonomous decision-making. For practical deployment, we further couple the reasoning module with a lightweight reactive action head for efficient action execution. Extensive experiments demonstrate the effectiveness of our approach. On the in-domain SimplerEnv WidowX benchmark, our framework achieves a state-of-the-art 81.2% success rate. Under OOD visual shifts and spatial ambiguities, a single visual interaction substantially improves task success over existing methods, highlighting the value of interactive reasoning for failure recovery in embodied control. Details of the project can be found here: https://signalispupupu.github.io/GTA-VLA_ProjPage/

Natural language programming is a promising approach to enable end users to instruct new tasks for intelligent agents. However, our formative study found that end users would often use unclear, ambiguous or vague concepts when naturally instructing tasks in natural language, especially when specifying conditionals. Existing systems have limited support for letting the user teach agents new concepts or explaining unclear concepts. In this paper, we describe a new multi-modal domain-independent approach that combines natural language programming and programming-by-demonstration to allow users to first naturally describe tasks and associated conditions at a high level, and then collaborate with the agent to recursively resolve any ambiguities or vagueness through conversations and demonstrations. Users can also define new procedures and concepts by demonstrating and referring to contents within GUIs of existing mobile apps. We demonstrate this approach in PUMICE, an end-user programmable agent that implements this approach. A lab study with 10 users showed its usability.

Single image reflection removal is inherently ambiguous, as both the reflection and transmission components requiring separation may follow natural image statistics. Existing methods attempt to address the issue by using various types of low-level and physics-based cues as sources of reflection signals. However, these cues are not universally applicable, since they are only observable in specific capture scenarios. This leads to a significant performance drop when test images do not align with their assumptions. In this paper, we aim to explore a novel flexible interactive reflection removal approach that leverages various forms of sparse human guidance, such as points and bounding boxes, as auxiliary high-level prior to achieve robust reflection removal. However, incorporating the raw user guidance naively into the existing reflection removal network does not result in performance gains. To this end, we innovatively transform raw user input into a unified form -- reflection masks using an Interactive Segmentation Foundation Model. Such a design absorbs the quintessence of the foundational segmentation model and flexible human guidance, thereby mitigating the challenges of reflection separations. Furthermore, to fully utilize user guidance and reduce user annotation costs, we design a mask-guided reflection removal network, comprising our proposed self-adaptive prompt block. This block adaptively incorporates user guidance as anchors and refines transmission features via cross-attention mechanisms. Extensive results on real-world images validate that our method demonstrates state-of-the-art performance on various datasets with the help of flexible and sparse user guidance. Our code and dataset will be publicly available here https://github.com/ShawnChenn/FlexibleReflectionRemoval.

Existing text-guided image editing methods primarily rely on end-to-end pixel-level inpainting paradigm. Despite its success in simple scenarios, this paradigm still significantly struggles with compositional editing tasks that require precise local control and complex multi-object spatial reasoning. This paradigm is severely limited by 1) the implicit coupling of planning and execution, 2) the lack of object-level control granularity, and 3) the reliance on unstructured, pixel-centric modeling. To address these limitations, we propose I2E, a novel "Decompose-then-Action" paradigm that revisits image editing as an actionable interaction process within a structured environment. I2E utilizes a Decomposer to transform unstructured images into discrete, manipulable object layers and then introduces a physics-aware Vision-Language-Action Agent to parse complex instructions into a series of atomic actions via Chain-of-Thought reasoning. Further, we also construct I2E-Bench, a benchmark designed for multi-instance spatial reasoning and high-precision editing. Experimental results on I2E-Bench and multiple public benchmarks demonstrate that I2E significantly outperforms state-of-the-art methods in handling complex compositional instructions, maintaining physical plausibility, and ensuring multi-turn editing stability.

Video Virtual Try-On (VVT) aims to seamlessly replace a garment on a person in a video with a new one. While existing methods have made significant strides in maintaining temporal consistency, they are predominantly confined to non-interactive scenarios where models merely showcase garments. This limitation overlooks a crucial aspect of real-world apparel presentation: active human-garment interaction. To bridge this gap, we introduce and formalize a new challenging task: Interactive Video Virtual Try-On (Interactive VVT), where subjects in the video actively engage with their clothing. This task introduces unique challenges beyond simple texture preservation, including: (1) resolving the semantic ambiguity of interactions from standard pose information, and (2) learning complex garment deformations from video where interactive moments are sparse and brief. To address these challenges, we propose iTryOn, a novel framework built upon a large-scale video diffusion Transformer. iTryOn pioneers a multi-level interaction injection mechanism to guide the generation of complex dynamics. At the spatial level, we introduce a garment-agnostic 3D hand prior to provide fine-grained guidance for precise hand-garment contact, effectively resolving spatial ambiguity. At the semantic level, iTryOn leverages global captions for overall context and time-stamped action captions for localized interactions, synchronized via our novel Action-aware Rotational Position Embedding (A-RoPE). Extensive experiments demonstrate that iTryOn not only achieves state-of-the-art performance on traditional VVT benchmarks but also establishes a commanding lead in the new interactive setting, marking a significant step towards more dynamic and controllable virtual try-on experiences.

Understanding the vulnerabilities of Large Vision Language Models (LVLMs) to jailbreak attacks is essential for their responsible real-world deployment. Most previous work requires access to model gradients, or is based on human knowledge (prompt engineering) to complete jailbreak, and they hardly consider the interaction of images and text, resulting in inability to jailbreak in black box scenarios or poor performance. To overcome these limitations, we propose a Prior-Guided Bimodal Interactive Black-Box Jailbreak Attack for toxicity maximization, referred to as PBI-Attack. Our method begins by extracting malicious features from a harmful corpus using an alternative LVLM and embedding these features into a benign image as prior information. Subsequently, we enhance these features through bidirectional cross-modal interaction optimization, which iteratively optimizes the bimodal perturbations in an alternating manner through greedy search, aiming to maximize the toxicity of the generated response. The toxicity level is quantified using a well-trained evaluation model. Experiments demonstrate that PBI-Attack outperforms previous state-of-the-art jailbreak methods, achieving an average attack success rate of 92.5% across three open-source LVLMs and around 67.3% on three closed-source LVLMs. Disclaimer: This paper contains potentially disturbing and offensive content.

Accurate interpretation of land-cover changes in multi-temporal satellite imagery is critical for real-world scenarios. However, existing methods typically provide only one-shot change masks or static captions, limiting their ability to support interactive, query-driven analysis. In this work, we introduce remote sensing image change analysis (RSICA) as a new paradigm that combines the strengths of change detection and visual question answering to enable multi-turn, instruction-guided exploration of changes in bi-temporal remote sensing images. To support this task, we construct ChangeChat-105k, a large-scale instruction-following dataset, generated through a hybrid rule-based and GPT-assisted process, covering six interaction types: change captioning, classification, quantification, localization, open-ended question answering, and multi-turn dialogues. Building on this dataset, we propose DeltaVLM, an end-to-end architecture tailored for interactive RSICA. DeltaVLM features three innovations: (1) a fine-tuned bi-temporal vision encoder to capture temporal differences; (2) a visual difference perception module with a cross-semantic relation measuring (CSRM) mechanism to interpret changes; and (3) an instruction-guided Q-former to effectively extract query-relevant difference information from visual changes, aligning them with textual instructions. We train DeltaVLM on ChangeChat-105k using a frozen large language model, adapting only the vision and alignment modules to optimize efficiency. Extensive experiments and ablation studies demonstrate that DeltaVLM achieves state-of-the-art performance on both single-turn captioning and multi-turn interactive change analysis, outperforming existing multimodal large language models and remote sensing vision-language models. Code, dataset and pre-trained weights are available at https://github.com/hanlinwu/DeltaVLM.

Recent works on click-based interactive segmentation have demonstrated state-of-the-art results by using various inference-time optimization schemes. These methods are considerably more computationally expensive compared to feedforward approaches, as they require performing backward passes through a network during inference and are hard to deploy on mobile frameworks that usually support only forward passes. In this paper, we extensively evaluate various design choices for interactive segmentation and discover that new state-of-the-art results can be obtained without any additional optimization schemes. Thus, we propose a simple feedforward model for click-based interactive segmentation that employs the segmentation masks from previous steps. It allows not only to segment an entirely new object, but also to start with an external mask and correct it. When analyzing the performance of models trained on different datasets, we observe that the choice of a training dataset greatly impacts the quality of interactive segmentation. We find that the models trained on a combination of COCO and LVIS with diverse and high-quality annotations show performance superior to all existing models. The code and trained models are available at https://github.com/saic-vul/ritm_interactive_segmentation.

Developing multi-turn interactive tool-use agents is challenging because real-world user needs are often complex and ambiguous, yet agents must execute deterministic actions to satisfy them. To address this gap, we introduce CoVe (Constraint-Verification), a post-training data synthesis framework designed for training interactive tool-use agents while ensuring both data complexity and correctness. CoVe begins by defining explicit task constraints, which serve a dual role: they guide the generation of complex trajectories and act as deterministic verifiers for assessing trajectory quality. This enables the creation of high-quality training trajectories for supervised fine-tuning (SFT) and the derivation of accurate reward signals for reinforcement learning (RL). Our evaluation on the challenging τ^2-bench benchmark demonstrates the effectiveness of the framework. Notably, our compact CoVe-4B model achieves success rates of 43.0\% and 59.4\% in the Airline and Retail domains, respectively; its overall performance significantly outperforms strong baselines of similar scale and remains competitive with models up to 17times its size. These results indicate that CoVe provides an effective and efficient pathway for synthesizing training data for state-of-the-art interactive tool-use agents. To support future research, we open-source our code, trained model, and the full set of 12K high-quality trajectories used for training.

Coding agents are typically evaluated with desired behavior specified through issues or instructions. In practical web development, however, agents may need to infer behavior from working software and implement it in an incomplete application. We introduce ProgramDistill, a benchmark evaluating coding agents on features discovered through interaction with fully functional reference applications. We build ProgramDistill by factorizing applications into features of different granularities, each associated with replayable behaviors executable via its gold patch. Our pipeline, mine-craft-patch, discovers 1,975 replay-verified behaviors across 26 applications and constructs 4,063 tasks without human intervention. Across nine frontier coding agents, GPT-6 Astra and Claude Opus 5 achieve 49.2% and 28.8% success on cumulative workflows in full-application reconstruction. In partial-application reconstruction, success falls from 100% to 64.0% and from 96% to 32% as restoration depth increases from 1 to 8. ProgramDistill thus provides a scalable benchmark with controlled difficulty for evaluating and diagnosing coding agents, and a natural basis for future curriculum-based training.

As humans, we aspire to create media content that is both freely willed and readily controlled. Thanks to the prominent development of generative techniques, we now can easily utilize 2D diffusion methods to synthesize images controlled by raw sketch or designated human poses, and even progressively edit/regenerate local regions with masked inpainting. However, similar workflows in 3D modeling tasks are still unavailable due to the lack of controllability and efficiency in 3D generation. In this paper, we present a novel controllable and interactive 3D assets modeling framework, named Coin3D. Coin3D allows users to control the 3D generation using a coarse geometry proxy assembled from basic shapes, and introduces an interactive generation workflow to support seamless local part editing while delivering responsive 3D object previewing within a few seconds. To this end, we develop several techniques, including the 3D adapter that applies volumetric coarse shape control to the diffusion model, proxy-bounded editing strategy for precise part editing, progressive volume cache to support responsive preview, and volume-SDS to ensure consistent mesh reconstruction. Extensive experiments of interactive generation and editing on diverse shape proxies demonstrate that our method achieves superior controllability and flexibility in the 3D assets generation task.

Medical researchers and clinicians often need to perform novel segmentation tasks on a set of related images. Existing methods for segmenting a new dataset are either interactive, requiring substantial human effort for each image, or require an existing set of previously labeled images. We introduce a system, MultiverSeg, that enables practitioners to rapidly segment an entire new dataset without requiring access to any existing labeled data from that task or domain. Along with the image to segment, the model takes user interactions such as clicks, bounding boxes or scribbles as input, and predicts a segmentation. As the user segments more images, those images and segmentations become additional inputs to the model, providing context. As the context set of labeled images grows, the number of interactions required to segment each new image decreases. We demonstrate that MultiverSeg enables users to interactively segment new datasets efficiently, by amortizing the number of interactions per image to achieve an accurate segmentation. Compared to using a state-of-the-art interactive segmentation method, MultiverSeg reduced the total number of clicks by 36% and scribble steps by 25% to achieve 90% Dice on sets of images from unseen tasks. We release code and model weights at https://multiverseg.csail.mit.edu

Computer vision is increasingly used to automate recognition tasks in large ecological datasets, but more complex tasks such as multi-object tracking continue to pose challenges. As researchers seek to incorporate vision models in ecology workflows, various lines of research have explored how to make imperfect predictions useful through human-in-the-loop processes. We propose a new approach to working with imperfect tracking predictions through an interactive prediction correction workflow taking place as a conversation with a multimodal large language model, which we tailor to a sonar fish tracking dataset as an initial proof of concept. We investigate the performance of the tool, Molmo2Fish, across guided and unguided tasks, correcting its own predicted tracks and external tracks. We find that Molmo2Fish achieves high performance on fish tracking and track correction tasks, but there is still much room to improve on incorporating natural language guidance. The code and data are publicly available at https://github.com/tidalove/molmo2fish.

In this paper, we introduce NarrativePlay, a novel system that allows users to role-play a fictional character and interact with other characters in narratives such as novels in an immersive environment. We leverage Large Language Models (LLMs) to generate human-like responses, guided by personality traits extracted from narratives. The system incorporates auto-generated visual display of narrative settings, character portraits, and character speech, greatly enhancing user experience. Our approach eschews predefined sandboxes, focusing instead on main storyline events extracted from narratives from the perspective of a user-selected character. NarrativePlay has been evaluated on two types of narratives, detective and adventure stories, where users can either explore the world or improve their favorability with the narrative characters through conversations.

Many recent breakthroughs in machine learning have been enabled by the pre-trained foundation models. By scaling up model parameters, training data, and computation resources, foundation models have significantly advanced the state-of-the-art in many applications. However, it is still an open question of how to use these models to perform downstream tasks efficiently. Knowledge distillation (KD) has been explored to tackle this challenge. KD transfers knowledge from a large teacher model to a smaller student model. While KD has been successful in improving student model performance, recent research has discovered that a powerful teacher does not necessarily lead to a powerful student, due to their huge capacity gap. In addition, the potential distribution shifts between the pre-training data and downstream tasks can make knowledge transfer in KD sub-optimal for improving downstream task performance. In this paper, we extend KD with an interactive communication process to help students of downstream tasks learn effectively from pre-trained foundation models. Our design is inspired by the way humans learn from teachers who can explain knowledge in a way that meets the students' needs. Specifically, we let each model (i.e., student and teacher) train two components: (1) an encoder encoding the model's hidden states to a message and (2) a decoder decoding any messages to its own hidden states. With encoder and decoder, not only can the teacher transfer rich information by encoding its hidden states, but also the student can send messages with information of downstream tasks to the teacher. Therefore, knowledge passing from teacher to student can be tailored to the student's capacity and downstream tasks' distributions. We conducted experiments on benchmark datasets to show that our communication mechanism outperforms state-of-the-art distillation techniques.

An interactive world model must follow the user's actions, remember the places it has shown, and stream in real time. The tension is structural: control wants a short horizon, memory wants an unbounded one. ReWorld separates the two during training and bounds them at inference. Mixed per-head attention windows confine most heads to the recent past while a small set of global heads attends over the entire history, and random head routing keeps either capability from binding to particular heads; random chunk dropping makes sparse histories in-distribution. At inference the whole past lives under a fixed budget: a bounded KV cache backed by a pose-indexed landmark bank, from which the model retrieves the landmarks nearest the current pose. A metric-scale-aligned data engine places eight sources -- Unreal-rendered fly-throughs, game roaming, and real-world footage -- on one physical action scale, so the same key press moves the camera the same distance in every source, and palindrome trajectories supply the revisit evidence that memory training needs. Distribution-matching distillation confined to a LoRA adapter then compresses sampling to four steps: one backbone serves both a high-fidelity multi-step mode and a real-time interactive one, streaming 704x1280 video across photorealistic, game-style, and stylized worlds. Under a three-axis protocol covering action following, long-horizon recall, and video quality, against six recent interactive world models it attains the best control fidelity (11.95^circ rotation error and the best camera-motion consistency) and the best generation quality; and on minute-long out-and-back rollouts (64\,s, 384 latents), its fixed 12-chunk cache still regenerates the starting view -- at rollout lengths where a sliding window has long evicted the evidence and full-KV attention runs out of memory.

As Large Language Models increasingly automate complex, long-horizon tasks such as vibe coding, a supervision gap has emerged. While models excel at execution, users often struggle to guide them effectively due to insufficient domain expertise, the difficulty of articulating precise intent, and the inability to reliably validate complex outputs. It presents a critical challenge in scalable oversight: enabling humans to responsibly steer AI systems on tasks that surpass their own ability to specify or verify. To tackle this, we propose Scalable Interactive Oversight, a framework that decomposes complex intent into a recursive tree of manageable decisions to amplify human supervision. Rather than relying on open-ended prompting, our system elicits low-burden feedback at each node and recursively aggregates these signals into precise global guidance. Validated in web development task, our framework enables non-experts to produce expert-level Product Requirement Documents, achieving a 54\% improvement in alignment. Crucially, we demonstrate that this framework can be optimized via Reinforcement Learning using only online user feedback, offering a practical pathway for maintaining human control as AI scales.

Autoregressive video world models predict future visual observations conditioned on actions. While effective over short horizons, these models often struggle with long-horizon generation, as small prediction errors accumulate over time. Prior methods alleviate this by introducing pre-trained teacher models and sequence-level distribution matching, which incur additional computational cost and fail to prevent error propagation beyond the training horizon. In this work, we propose LIVE, a Long-horizon Interactive Video world modEl that enforces bounded error accumulation via a novel cycle-consistency objective, thereby eliminating the need for teacher-based distillation. Specifically, LIVE first performs a forward rollout from ground-truth frames and then applies a reverse generation process to reconstruct the initial state. The diffusion loss is subsequently computed on the reconstructed terminal state, providing an explicit constraint on long-horizon error propagation. Moreover, we provide an unified view that encompasses different approaches and introduce progressive training curriculum to stabilize training. Experiments demonstrate that LIVE achieves state-of-the-art performance on long-horizon benchmarks, generating stable, high-quality videos far beyond training rollout lengths.

Large language models (LLMs) have demonstrated remarkable prowess in language understanding and generation. Advancing from foundation LLMs to instructionfollowing LLMs, instruction tuning plays a vital role in aligning LLMs to human preferences. However, the existing LLMs are usually focused on English, leading to inferior performance in non-English languages. In order to improve the performance for non-English languages, it is necessary to collect language-specific training data for foundation LLMs and construct language-specific instructions for instruction tuning, both of which are heavy loads. To minimize human workload, we propose to transfer the capabilities of language generation and instruction following from English to other languages through an interactive translation task. We have developed BayLing, an instruction-following LLM by utilizing LLaMA as the foundation LLM and automatically constructing interactive translation instructions for instructing tuning. Extensive assessments demonstrate that BayLing achieves comparable performance to GPT-3.5-turbo, despite utilizing a considerably smaller parameter size of only 13 billion. Experimental results on translation tasks show that BayLing achieves 95% of single-turn translation capability compared to GPT-4 with automatic evaluation and 96% of interactive translation capability compared to GPT-3.5-turbo with human evaluation. To estimate the performance on general tasks, we created a multi-turn instruction test set called BayLing-80. The experimental results on BayLing-80 indicate that BayLing achieves 89% of performance compared to GPT-3.5-turbo. BayLing also demonstrates outstanding performance on knowledge assessment of Chinese GaoKao and English SAT, second only to GPT-3.5-turbo among a multitude of instruction-following LLMs. Demo, homepage, code and models of BayLing are available.

Building home assistant robots has long been a pursuit for vision and robotics researchers. To achieve this task, a simulated environment with physically realistic simulation, sufficient articulated objects, and transferability to the real robot is indispensable. Existing environments achieve these requirements for robotics simulation with different levels of simplification and focus. We take one step further in constructing an environment that supports household tasks for training robot learning algorithm. Our work, SAPIEN, is a realistic and physics-rich simulated environment that hosts a large-scale set for articulated objects. Our SAPIEN enables various robotic vision and interaction tasks that require detailed part-level understanding.We evaluate state-of-the-art vision algorithms for part detection and motion attribute recognition as well as demonstrate robotic interaction tasks using heuristic approaches and reinforcement learning algorithms. We hope that our SAPIEN can open a lot of research directions yet to be explored, including learning cognition through interaction, part motion discovery, and construction of robotics-ready simulated game environment.

Long-horizon planning is widely recognized as a core capability of autonomous LLM-based agents; however, current evaluation frameworks suffer from being largely episodic, domain-specific, or insufficiently grounded in persistent economic dynamics. We introduce EcoGym, a generalizable benchmark for continuous plan-and-execute decision making in interactive economies. EcoGym comprises three diverse environments: Vending, Freelance, and Operation, implemented in a unified decision-making process with standardized interfaces, and budgeted actions over an effectively unbounded horizon (1000+ steps if 365 day-loops for evaluation). The evaluation of EcoGym is based on business-relevant outcomes (e.g., net worth, income, and DAU), targeting long-term strategic coherence and robustness under partial observability and stochasticity. Experiments across eleven leading LLMs expose a systematic tension: no single model dominates across all three scenarios. Critically, we find that models exhibit significant suboptimality in either high-level strategies or efficient actions executions. EcoGym is released as an open, extensible testbed for transparent long-horizon agent evaluation and for studying controllability-utility trade-offs in realistic economic settings.

Recent advances in deep thinking models have demonstrated remarkable reasoning capabilities on mathematical and coding tasks. However, their effectiveness in embodied domains which require continuous interaction with environments through image action interleaved trajectories remains largely -unexplored. We present Embodied Reasoner, a model that extends o1 style reasoning to interactive embodied search tasks. Unlike mathematical reasoning that relies primarily on logical deduction, embodied scenarios demand spatial understanding, temporal reasoning, and ongoing self-reflection based on interaction history. To address these challenges, we synthesize 9.3k coherent Observation-Thought-Action trajectories containing 64k interactive images and 90k diverse thinking processes (analysis, spatial reasoning, reflection, planning, and verification). We develop a three-stage training pipeline that progressively enhances the model's capabilities through imitation learning, self-exploration via rejection sampling, and self-correction through reflection tuning. The evaluation shows that our model significantly outperforms those advanced visual reasoning models, e.g., it exceeds OpenAI o1, o3-mini, and Claude-3.7 by +9\%, 24\%, and +13\%. Analysis reveals our model exhibits fewer repeated searches and logical inconsistencies, with particular advantages in complex long-horizon tasks. Real-world environments also show our superiority while exhibiting fewer repeated searches and logical inconsistency cases.

We present Game-Guided Skill Discovery (GGSD), a framework that uses self-play in games to discover motor skills that are directly playable by humans. Playable skills provide a compact abstraction for controlling embodied agents through a small set of learned behaviors rather than low-level actions. To be effective, these skills should be semantically distinct, interpretable, and expressive; properties that existing unsupervised skill-discovery methods often fail to achieve simultaneously. GGSD achieves these desiderata by grounding skill discovery in competitive gameplay. A hierarchical agent competes against its past selves, with a high-level policy selecting from a small discrete skill set and a skill-conditioned low-level policy learning the corresponding behaviors. After training, a human can replace the high-level policy and directly control the agent through the same discrete skills. Despite the small number of high-level actions, skill transitions give rise to emergent combo behaviors, expanding expressivity beyond individual primitives. Across Ant, Franka-arm, and Unitree G1 environments, we show that GGSD produces human-playable skills that humans can compose to solve unseen tasks, such as Maze and CubePush, without additional training. An interactive demo is available at https://ggsd-demo.github.io.

Graphical User Interface (GUI) grounding is commonly framed as a coordinate prediction task -- given a natural language instruction, generate on-screen coordinates for actions such as clicks and keystrokes. However, recent Vision Language Models (VLMs) often fail to predict accurate numeric coordinates when processing high-resolution GUI images with complex layouts. To address this issue, we reframe GUI grounding as an interactive search task, where the VLM generates actions to move a cursor in the GUI to locate UI elements. At each step, the model determines the target object, evaluates the spatial relations between the cursor and the target, and moves the cursor closer to the target conditioned on the movement history. In this interactive process, the rendered cursor provides visual feedback to help the model align its predictions with the corresponding on-screen locations. We train our GUI grounding model, GUI-Cursor, using multi-step online reinforcement learning with a dense trajectory-based reward function. Our experimental results show that GUI-Cursor, based on Qwen2.5-VL-7B, improves the GUI grounding accuracy and achieves state-of-the-art results on ScreenSpot-v2 (88.8% rightarrow 93.9%) and ScreenSpot-Pro (26.8% rightarrow 56.5%). Moreover, we observe that GUI-Cursor learns to solve the problem within two steps for 95\% of instances and can adaptively conduct more steps on more difficult examples.

Interactive Generative Video (IGV) has emerged as a crucial technology in response to the growing demand for high-quality, interactive video content across various domains. In this paper, we define IGV as a technology that combines generative capabilities to produce diverse high-quality video content with interactive features that enable user engagement through control signals and responsive feedback. We survey the current landscape of IGV applications, focusing on three major domains: 1) gaming, where IGV enables infinite exploration in virtual worlds; 2) embodied AI, where IGV serves as a physics-aware environment synthesizer for training agents in multimodal interaction with dynamically evolving scenes; and 3) autonomous driving, where IGV provides closed-loop simulation capabilities for safety-critical testing and validation. To guide future development, we propose a comprehensive framework that decomposes an ideal IGV system into five essential modules: Generation, Control, Memory, Dynamics, and Intelligence. Furthermore, we systematically analyze the technical challenges and future directions in realizing each component for an ideal IGV system, such as achieving real-time generation, enabling open-domain control, maintaining long-term coherence, simulating accurate physics, and integrating causal reasoning. We believe that this systematic analysis will facilitate future research and development in the field of IGV, ultimately advancing the technology toward more sophisticated and practical applications.

Interactive medical questioning is essential in real-world clinical consultations, where physicians must actively gather information from patients. While medical Large Language Models (LLMs) have shown impressive capabilities in static medical question answering, they predominantly operate under a reactive paradigm: generating answers directly without seeking additional information, which risks incorrect diagnoses in such interactive settings. To address this limitation, we propose ProMed, a reinforcement learning (RL) framework that transitions medical LLMs toward a proactive paradigm, equipping them with the ability to ask clinically valuable questions before decision-making. At the core of ProMed is the Shapley Information Gain (SIG) reward, which quantifies the clinical utility of each question by combining the amount of newly acquired information with its contextual importance, estimated via Shapley values. We integrate SIG into a two-stage training pipeline: (1) SIG-Guided Model Initialization uses Monte Carlo Tree Search (MCTS) to construct high-reward interaction trajectories to supervise the model, and (2) SIG-Augmented Policy Optimization, which integrates SIG and enhances RL with a novel SIG-guided Reward Distribution Mechanism that assigns higher rewards to informative questions for targeted optimization. Extensive experiments on two newly curated partial-information medical benchmarks demonstrate that ProMed significantly outperforms state-of-the-art methods by an average of 6.29% and delivers a 54.45% gain over the reactive paradigm, while also generalizing robustly to out-of-domain cases.

Privileged on-policy distillation provides dense supervision for multi-turn agents by allowing a synchronized teacher to re-score the student's response at every turn with access to training-only references, such as successful trajectories. In interactive environments, however, the student's preceding actions continually change the execution state. As the student takes different actions or completes subgoals in a different order, its rollout may reach states not covered by the reference, making the reference an unreliable source of guidance for the state actually reached. Applying privileged distillation indiscriminately therefore creates state--reference mismatch. This mismatch motivates a central objective: providing privileged reference guidance that remains compatible with the student's current execution state. We introduce State-Matched Routing and Contextualized Self-Distillation (SMRC-SD), which explicitly determines when and how a privileged trajectory should guide an on-policy student. At each turn, SMRC-SD verifies whether the student's current execution state matches a supported state along the reference trajectory. Distillation is applied only at matched states, filtering out turns for which the reference lacks locally compatible guidance. For each matched state, SMRC-SD further constructs state-conditioned teacher context from the successful trajectory, grounding supervision in the state actually reached. Across ALFWorld and WebShop, SMRC-SD consistently outperforms unconditional successful full-path distillation. With Qwen3-1.7B, it improves task success from 0.746 to 0.865 on ALFWorld and from 0.574 to 0.693 on WebShop. Controlled routing and context ablations support both selecting locally supported turns and constructing state-compatible teacher context as contributors to these gains. Code is available at https://github.com/liujunzhuo/SMRC-SD.

Automated agent design improves agent harnesses through iterative revision, evaluation, and feedback summarization. Existing methods are largely candidate-centric: cross-round experience is organized around candidate agents, which leaves the repair progress implicit. This causes inefficient repair targeting, slow consolidation of partial progress, and propagation of ineffective interventions across rounds. Therefore, we formulate issue-centric agent optimization, in which repair progress is carried forward as an explicit persistent issue state to guide optimization, rather than re-derived from candidate history in each round. We instantiate the formulation in ADIAS, a framework for automated full-code agent design with two mechanisms. A persistent issue state maintains stable issue identities, lifecycle status, supporting evidence, and intervention-outcome histories. Issue-guided optimization uses this state to jointly propose repair targets and revision directions for subsequent focused full-code modification. Across five interactive benchmarks, ADIAS outperforms the strongest baseline by 25.2% on average and achieves consistent gains across four backbone models. Controlled ablations further show that removing persistent issue state or replacing issue-centric revision with candidate-centric policies leads to performance drops of up to 40.7%.

Deep learning models for natural language processing (NLP) are increasingly adopted and deployed by analysts without formal training in NLP or machine learning (ML). However, the documentation intended to convey the model's details and appropriate use is tailored primarily to individuals with ML or NLP expertise. To address this gap, we conduct a design inquiry into interactive model cards, which augment traditionally static model cards with affordances for exploring model documentation and interacting with the models themselves. Our investigation consists of an initial conceptual study with experts in ML, NLP, and AI Ethics, followed by a separate evaluative study with non-expert analysts who use ML models in their work. Using a semi-structured interview format coupled with a think-aloud protocol, we collected feedback from a total of 30 participants who engaged with different versions of standard and interactive model cards. Through a thematic analysis of the collected data, we identified several conceptual dimensions that summarize the strengths and limitations of standard and interactive model cards, including: stakeholders; design; guidance; understandability & interpretability; sensemaking & skepticism; and trust & safety. Our findings demonstrate the importance of carefully considered design and interactivity for orienting and supporting non-expert analysts using deep learning models, along with a need for consideration of broader sociotechnical contexts and organizational dynamics. We have also identified design elements, such as language, visual cues, and warnings, among others, that support interactivity and make non-interactive content accessible. We summarize our findings as design guidelines and discuss their implications for a human-centered approach towards AI/ML documentation.

Large-scale generative models are capable of producing high-quality images from detailed text descriptions. However, many aspects of an image are difficult or impossible to convey through text. We introduce self-guidance, a method that provides greater control over generated images by guiding the internal representations of diffusion models. We demonstrate that properties such as the shape, location, and appearance of objects can be extracted from these representations and used to steer sampling. Self-guidance works similarly to classifier guidance, but uses signals present in the pretrained model itself, requiring no additional models or training. We show how a simple set of properties can be composed to perform challenging image manipulations, such as modifying the position or size of objects, merging the appearance of objects in one image with the layout of another, composing objects from many images into one, and more. We also show that self-guidance can be used to edit real images. For results and an interactive demo, see our project page at https://dave.ml/selfguidance/

We present a deep learning-based method for propagating spatially-varying visual material attributes (e.g. texture maps or image stylizations) to larger samples of the same or similar materials. For training, we leverage images of the material taken under multiple illuminations and a dedicated data augmentation policy, making the transfer robust to novel illumination conditions and affine deformations. Our model relies on a supervised image-to-image translation framework and is agnostic to the transferred domain; we showcase a semantic segmentation, a normal map, and a stylization. Following an image analogies approach, the method only requires the training data to contain the same visual structures as the input guidance. Our approach works at interactive rates, making it suitable for material edit applications. We thoroughly evaluate our learning methodology in a controlled setup providing quantitative measures of performance. Last, we demonstrate that training the model on a single material is enough to generalize to materials of the same type without the need for massive datasets.

While large-scale pretrained language models have significantly improved writing assistance functionalities such as autocomplete, more complex and controllable writing assistants have yet to be explored. We leverage advances in language modeling to build an interactive writing assistant that generates and rephrases text according to fine-grained author specifications. Users provide input to our Intent-Guided Assistant (IGA) in the form of text interspersed with tags that correspond to specific rhetorical directives (e.g., adding description or contrast, or rephrasing a particular sentence). We fine-tune a language model on a dataset heuristically-labeled with author intent, which allows IGA to fill in these tags with generated text that users can subsequently edit to their liking. A series of automatic and crowdsourced evaluations confirm the quality of IGA's generated outputs, while a small-scale user study demonstrates author preference for IGA over baseline methods in a creative writing task. We release our dataset, code, and demo to spur further research into AI-assisted writing.

Via thousands of papers in Explainable AI (XAI), attention maps vaswani2017attention and feature attribution maps bansal2020sam have been established as a common means for explaining the input features that are important to AI's decisions. It is an interesting but unexplored question whether allowing users to edit the importance scores of input features at test time would improve the human-AI team's accuracy on downstream tasks. In this paper, we address this question by taking CHM-Corr, a state-of-the-art, ante-hoc explanation method taesiri2022visual that first predicts patch-wise correspondences between the input and the training-set images, and then uses them to make classification decisions. We build an interactive interface on top of CHM-Corr, enabling users to directly edit the initial feature attribution map provided by CHM-Corr. Via our CHM-Corr++ interface, users gain insights into if, when, and how the model changes its outputs, enhancing understanding beyond static explanations. Our user study with 18 machine learning researchers who performed sim1,400 decisions shows that our interactive approach does not improve user accuracy on CUB-200 bird image classification over static explanations. This challenges the belief that interactivity inherently boosts XAI effectiveness~sokol2020one,sun2022exploring,shen2024towards,singh2024rethinking,mindlin2024beyond,lakkaraju2022rethinking,cheng2019explaining,liu2021understanding and raises needs for future research. Our work contributes to the field by open-sourcing an interactive tool for manipulating model attention, and it lays the groundwork for future research to enable effective human-AI interaction in computer vision. We release code and data on https://anonymous.4open.science/r/CHMCorrPlusPlus/{github}. Our interface are available http://137.184.82.109:7080/{here}.

We present WonderWorld, a novel framework for interactive 3D scene generation that enables users to interactively specify scene contents and layout and see the created scenes in low latency. The major challenge lies in achieving fast generation of 3D scenes. Existing scene generation approaches fall short of speed as they often require (1) progressively generating many views and depth maps, and (2) time-consuming optimization of the scene geometry representations. We introduce the Fast Layered Gaussian Surfels (FLAGS) as our scene representation and an algorithm to generate it from a single view. Our approach does not need multiple views, and it leverages a geometry-based initialization that significantly reduces optimization time. Another challenge is generating coherent geometry that allows all scenes to be connected. We introduce the guided depth diffusion that allows partial conditioning of depth estimation. WonderWorld generates connected and diverse 3D scenes in less than 10 seconds on a single A6000 GPU, enabling real-time user interaction and exploration. We demonstrate the potential of WonderWorld for user-driven content creation and exploration in virtual environments. We will release full code and software for reproducibility. Project website: https://kovenyu.com/WonderWorld/.

SmartAvatar is a vision-language-agent-driven framework for generating fully rigged, animation-ready 3D human avatars from a single photo or textual prompt. While diffusion-based methods have made progress in general 3D object generation, they continue to struggle with precise control over human identity, body shape, and animation readiness. In contrast, SmartAvatar leverages the commonsense reasoning capabilities of large vision-language models (VLMs) in combination with off-the-shelf parametric human generators to deliver high-quality, customizable avatars. A key innovation is an autonomous verification loop, where the agent renders draft avatars, evaluates facial similarity, anatomical plausibility, and prompt alignment, and iteratively adjusts generation parameters for convergence. This interactive, AI-guided refinement process promotes fine-grained control over both facial and body features, enabling users to iteratively refine their avatars via natural-language conversations. Unlike diffusion models that rely on static pre-trained datasets and offer limited flexibility, SmartAvatar brings users into the modeling loop and ensures continuous improvement through an LLM-driven procedural generation and verification system. The generated avatars are fully rigged and support pose manipulation with consistent identity and appearance, making them suitable for downstream animation and interactive applications. Quantitative benchmarks and user studies demonstrate that SmartAvatar outperforms recent text- and image-driven avatar generation systems in terms of reconstructed mesh quality, identity fidelity, attribute accuracy, and animation readiness, making it a versatile tool for realistic, customizable avatar creation on consumer-grade hardware.

Recent interactive video world model methods generate scene evolution conditioned on user instructions. Although they achieve impressive results, two key limitations remain. First, they fail to fully exploit the correspondence between instruction-driven scene motion and the underlying 3D geometry, which results in structural instability under viewpoint changes. Second, they easily forget historical information during multi-step interaction, resulting in error accumulation and progressive drift in scene semantics and structure. To address these issues, we propose MagicWorld, an interactive video world model that integrates 3D geometric priors and historical retrieval. MagicWorld starts from a single scene image, employs user actions to drive dynamic scene evolution, and autoregressively synthesizes continuous scenes. We introduce the Action-Guided 3D Geometry Module (AG3D), which constructs a point cloud from the first frame of each interaction and the corresponding action, providing explicit geometric constraints for viewpoint transitions and thereby improving structural consistency. We further propose History Cache Retrieval (HCR) mechanism, which retrieves relevant historical frames during generation and injects them as conditioning signals, helping the model utilize past scene information and mitigate error accumulation. Experimental results demonstrate that MagicWorld achieves notable improvements in scene stability and continuity across interaction iterations.

Existing self-evolving memory systems mainly improve agent memory based on textual outputs, such as task trajectories and reflections. However, this text-based paradigm rarely incorporates internal mechanistic signals, leaving how retrieved memory is actually utilized during task execution underexplored. This limitation can lead to unreliable error attribution and hallucinated memory modifications. In this work, we show that retrieval-head attention provides a mechanistic signal for revealing segment-level memory utilization. By aggregating attention over memory segments and decision steps, we construct a context utilization matrix that exposes recurring memory-use patterns and indicates corresponding refinement strategies. Building on this observation, we propose Attention-Guided Memory Refinement (AGMR), a framework that uses utilization patterns revealed by attention to guide targeted segment-level memory updates. AGMR corrects or enhances memory for failed executions, simplifies memory for successful executions, and verifies each update through re-execution. Experiments on interactive decision-making benchmarks show that AGMR improves both task performance and memory efficiency over text-only memory refinement baselines. Code is available at https://anonymous.4open.science/r/AGMR_code-3262/

Large language model (LLM) agents may recover from a failure within an episode or after a retry, yet the same execution failure can recur in later tasks because post-episode feedback rarely revises the persistent harness that guides future interactions. Static harnesses improve reliability through fixed tools, context, memory, and workflow structures, but remain unchanged after deployment. We propose Living-Harness, a self-evolving agent harness that converts each completed trajectory and its evaluator signals into posterior evidence for bounded harness updates. Guided by a domain-level Evolution-SOP (Standard Operating Procedure), Living-Harness extracts an episode abstraction and structured update evidence, and writes two complementary forms of procedural knowledge: episodic memory that records trigger conditions, failure patterns, and recovery actions, and a state graph that records state nodes, repair edges, and transition rules. The updated harness state is retrieved to guide future interactions, while tools and base context remain frozen, allowing procedural repairs to accumulate across evolution cycles. On eight interactive environments derived from τ^2-Bench and MultiWOZ-2.4, Living-Harness improves average Pass@1 over the strongest interactive baseline by 10.07 and 9.91 percentage points, respectively, and supports retrieval-only reuse of the evolved harness state across model backbones.

This report presents an improved version of AlayaWorld. While the backbone architecture, chunk-wise autoregressive generation scheme, and training data remain unchanged from the previous release, we substantially revise how conditioning signals are represented and integrated into the model. The new design is guided by a simple principle: conditioning signals should match the generated content as closely as possible in both latent representation and temporal structure. To this end, we make two major changes. First, we replace the previous depth-warping-based spatial memory with a streaming 3D point-cache renderer. Second, we redesign the conditioning pipeline so that visual conditions are encoded in the same causal-VAE latent space, with temporal statistics consistent with those of the generated video. Concretely, the new version introduces six modifications: (1) replacing static-frame image conditioning with motion-aware latent conditioning; (2) causally encoding re-rendered spatial memory as a continuous sequence; (3) aligning the temporal-memory window in pixel space; (4) adopting hard memory dropout that removes memory tokens rather than zeroing them; (5) unifying the VAE encoding and decoding protocol across training and inference; and (6) removing the camera AdaLN branch, such that viewpoint control is provided entirely through the re-rendered spatial condition.

Most existing GUI agents typically depend on non-vision inputs like HTML source code or accessibility trees, limiting their flexibility across diverse software environments and platforms. Current multimodal large language models (MLLMs), which excel at using vision to ground real-world objects, offer a potential alternative. However, they often struggle with accurately localizing GUI elements -- a critical requirement for effective GUI automation -- due to the semantic gap between real-world objects and GUI elements. In this work, we introduce Ponder & Press, a divide-and-conquer framework for general computer control using only visual input. Our approach combines an general-purpose MLLM as an 'interpreter', responsible for translating high-level user instructions into detailed action descriptions, with a GUI-specific MLLM as a 'locator' that precisely locates GUI elements for action placement. By leveraging a purely visual input, our agent offers a versatile, human-like interaction paradigm applicable to a wide range of applications. Ponder & Press locator outperforms existing models by +22.5% on the ScreenSpot GUI grounding benchmark. Both offline and interactive agent benchmarks across various GUI environments -- including web pages, desktop software, and mobile UIs -- demonstrate that Ponder & Press framework achieves state-of-the-art performance, highlighting the potential of visual GUI agents. Refer to the project homepage https://invinciblewyq.github.io/ponder-press-page/

Graphical user interfaces (GUI) automation agents are emerging as powerful tools, enabling humans to accomplish increasingly complex tasks on smart devices. However, users often inadvertently omit key information when conveying tasks, which hinders agent performance in the current agent paradigm that does not support immediate user intervention. To address this issue, we introduce a Self-Correction GUI Navigation task that incorporates interactive information completion capabilities within GUI agents. We developed the Navi-plus dataset with GUI follow-up question-answer pairs, alongside a Dual-Stream Trajectory Evaluation method to benchmark this new capability. Our results show that agents equipped with the ability to ask GUI follow-up questions can fully recover their performance when faced with ambiguous user tasks.

Agent systems powered by large language models (LLMs) have demonstrated impressive performance on repository-level code-generation tasks. However, for tasks such as website codebase generation, which depend heavily on visual effects and user-interaction feedback, current code agents rely only on simple code execution for feedback and verification. This approach fails to capture the actual quality of the generated code. In this paper, we propose WebGen-Agent, a novel website-generation agent that leverages comprehensive and multi-level visual feedback to iteratively generate and refine the website codebase. Detailed and expressive text descriptions and suggestions regarding the screenshots and GUI-agent testing of the websites are generated by a visual language model (VLM), together with scores that quantify their quality. The screenshot and GUI-agent scores are further integrated with a backtracking and select-best mechanism, enhancing the performance of the agent. Utilizing the accurate visual scores inherent in the WebGen-Agent workflow, we further introduce Step-GRPO with Screenshot and GUI-agent Feedback to improve the ability of LLMs to act as the reasoning engine of WebGen-Agent. By using the screenshot and GUI-agent scores at each step as the reward in Step-GRPO, we provide a dense and reliable process supervision signal, which effectively improves the model's website-generation ability. On the WebGen-Bench dataset, WebGen-Agent increases the accuracy of Claude-3.5-Sonnet from 26.4% to 51.9% and its appearance score from 3.0 to 3.9, outperforming the previous state-of-the-art agent system. Additionally, our Step-GRPO training approach increases the accuracy of Qwen2.5-Coder-7B-Instruct from 38.9% to 45.4% and raises the appearance score from 3.4 to 3.7.

Personalized mobile agents that infer user preferences and calibrate proactive assistance hold great promise as everyday digital assistants, yet existing benchmarks fail to capture what this requires. Prior work evaluates preference recovery from static histories or intent prediction from fixed contexts. Neither tests whether an agent can elicit missing preferences through interaction, nor whether it can decide when to intervene, seek consent, or remain silent in a live GUI environment. We introduce KnowU-Bench, an online benchmark for personalized mobile agents built on a reproducible Android emulation environment, covering 42 general GUI tasks, 86 personalized tasks, and 64 proactive tasks. Unlike prior work that treats user preferences as static context, KnowU-Bench hides the user profile from the agent and exposes only behavioral logs, forcing genuine preference inference rather than context lookup. To support multi-turn preference elicitation, it instantiates an LLM-driven user simulator grounded in structured profiles, enabling realistic clarification dialogues and proactive consent handling. Beyond personalization, KnowU-Bench provides comprehensive evaluation of the complete proactive decision chain, including grounded GUI execution, consent negotiation, and post-rejection restraint, evaluated through a hybrid protocol combining rule-based verification with LLM-as-a-Judge scoring. Our experiments reveal a striking degradation: agents that excel at explicit task execution fall below 50% under vague instructions requiring user preference inference or intervention calibration, even for frontier models like Claude Sonnet 4.6. The core bottlenecks are not GUI navigation but preference acquisition and intervention calibration, exposing a fundamental gap between competent interface operation and trustworthy personal assistance.

We present a framework for building interactive, real-time, natural language-instructable robots in the real world, and we open source related assets (dataset, environment, benchmark, and policies). Trained with behavioral cloning on a dataset of hundreds of thousands of language-annotated trajectories, a produced policy can proficiently execute an order of magnitude more commands than previous works: specifically we estimate a 93.5% success rate on a set of 87,000 unique natural language strings specifying raw end-to-end visuo-linguo-motor skills in the real world. We find that the same policy is capable of being guided by a human via real-time language to address a wide range of precise long-horizon rearrangement goals, e.g. "make a smiley face out of blocks". The dataset we release comprises nearly 600,000 language-labeled trajectories, an order of magnitude larger than prior available datasets. We hope the demonstrated results and associated assets enable further advancement of helpful, capable, natural-language-interactable robots. See videos at https://interactive-language.github.io.

Long-horizon interactions between users and LLM-based assistants necessitate effective memory management, yet current approaches face challenges in training and evaluation of memory. Existing memory benchmarks rely on static, off-policy data as context, limiting evaluation reliability and scalability. To address these gaps, we introduce AMemGym, an interactive environment enabling on-policy evaluation and optimization for memory-driven personalization. AMemGym employs structured data sampling to predefine user profiles, state-dependent questions, and state evolution trajectories, enabling cost-effective generation of high-quality, evaluation-aligned interactions. LLM-simulated users expose latent states through role-play while maintaining structured state consistency. Comprehensive metrics based on structured data guide both assessment and optimization of assistants. Extensive experiments reveal performance gaps in existing memory systems (e.g., RAG, long-context LLMs, and agentic memory) and corresponding reasons. AMemGym not only enables effective selection among competing approaches but also can potentially drive the self-evolution of memory management strategies. By bridging structured state evolution with free-form interactions, our framework provides a scalable, diagnostically rich environment for advancing memory capabilities in conversational agents.

Remote sensing change understanding (RSCU) is essential for analyzing remote sensing images and understanding how human activities affect the environment. However, existing datasets lack deep understanding and interactions in the diverse change captioning, counting, and localization tasks. To tackle these gaps, we construct ChangeIMTI, a new large-scale interactive multi-task instruction dataset that encompasses four complementary tasks including change captioning, binary change classification, change counting, and change localization. Building upon this new dataset, we further design a novel vision-guided vision-language model (ChangeVG) with dual-granularity awareness for bi-temporal remote sensing images (i.e., two remote sensing images of the same area at different times). The introduced vision-guided module is a dual-branch architecture that synergistically combines fine-grained spatial feature extraction with high-level semantic summarization. These enriched representations further serve as the auxiliary prompts to guide large vision-language models (VLMs) (e.g., Qwen2.5-VL-7B) during instruction tuning, thereby facilitating the hierarchical cross-modal learning. We extensively conduct experiments across four tasks to demonstrate the superiority of our approach. Remarkably, on the change captioning task, our method outperforms the strongest method Semantic-CC by 1.39 points on the comprehensive S*m metric, which integrates the semantic similarity and descriptive accuracy to provide an overall evaluation of change caption. Moreover, we also perform a series of ablation studies to examine the critical components of our method. The source code and associated data for this work are publicly available at Github.

We present ABot-World-0, an action-conditioned video world model for real-time, long-horizon closed-loop interaction, supported by a multi-source data infrastructure spanning AAA games, simulation engines, and internet videos to learn controllable world dynamics. WorldExplorer performs agent-driven collection guided by training feedback, while a unified pipeline applies 14 deterministic quality checks, VLM-based assessment, and synchronized action and text annotation. We progressively distill a bidirectional action-conditioned teacher into a causal student through teacher forcing and ODE distillation, and introduce LongForcing to align long student self-rollouts with an extended-horizon teacher, mitigating accumulated distribution shift and autoregressive drift. Raw keyboard actions provide a unified control interface for scene roaming and third-person character interaction, while reference-character memory provides persistent appearance cues for identity consistency during third-person rollouts. For deployment, we co-design a streaming inference stack with a lightweight VAE decoder, efficient attention, memory-aware scheduling, and low-bit DiT inference. Across optimized low-bit configurations, ABot-World-0 streams 720P video at up to 16 FPS on a single NVIDIA RTX 5090 desktop GPU, with 1.2s action-to-first-frame latency and approximately 19GiB peak VRAM. Experiments on WorldRoamBench and extended interactive rollouts demonstrate competitive controllability and coherent long-horizon world evolution.

Selecting a complete 3D object from a reconstructed scene with minimal user effort is essential for practical scene editing and embodied interaction. Existing 3DGS-based methods either retrain the Gaussian representation to embed per-object labels, or build dense multi-view SAM observations, both requiring heavy computation and dense viewpoint coverage that is rarely available in practice. We present GaussianSelector, a training-free framework for interactive 3D object selection from sparse views and sparse scribble guidance. Operating directly on native Gaussian primitives, we coarsen dense Gaussians into geometrically coherent superpoints and construct a continuity-weighted graph using appearance and spatial cues. Sparse user scribbles are lifted into 3D via visibility-aware transmittance coverage, and selection is solved as a global graph-cut energy minimization that propagates sparse evidence to a complete 3D object. This design naturally supports multi-round refinement, where users iteratively correct the selection from additional viewpoints to progressively improve the result. Experiments demonstrate that GaussianSelector achieves competitive selection quality against state-of-the-art multi-view SAM-based methods, while requiring significantly fewer interaction views and substantially lower computational overhead. These properties make it well suited for human-in-the-loop 3D scene editing and 3D asset extraction in real-world deployment scenarios.

Interactive 3D head generation requires coordinated speaking and listening motion that responds to an evolving conversation. Existing generators use incoming observations as context but keep their parameters fixed, leaving conversational patterns unused as a learning signal. We introduce EvolvingAvatar, a causal generator that uses test-time training to adapt to user face video and dyadic audio during interaction. Its dyadic context prediction objective provides a self-supervised learning signal from audiovisual context without target motion labels at test time. Persistent fast weights accumulate these updates within each conversation to guide motion generation, while transient jaw adaptation responds to current audiovisual context. Predicted speech activity controls how persistent adaptation guides motion. We also introduce InterHead-Bench, a unified 455.95-hour benchmark built from single-view and dual-view conversation videos. Experiments show improved conversational motion statistics over strong baselines. On the hardest out-of-distribution split, generation improves as conversations unfold, reducing mismatch with recorded user-avatar expression statistics by up to 11.1% from the first interval.

Agent skills are portable packages of instructions and resources an agent consults at deployment. Self-evolving them fails in two ways today. First, skills evolved from scratch underperform human-curated ones and, on a weak model, using no skill at all. Second, an evolution-time pass records one lucky trajectory that a fresh stochastic agent often fails to reproduce at deployment. We present reSolve, a per-task, oracle-in-the-loop framework built on three components. It decouples interactive solving from a self-contained deliverable that is independently re-executed in a fresh container, a protocol we call solve-and-reproduce. It enhances the sparse reward signal with a surrogate verifier that cannot access hidden tests or reference answers. It then runs verifier-guided beam search over a solution-construction graph. Within a fixed harness, a cheap model self-evolves skills that reach 74.9% mean-of-3, +14.8 points over the 60.1% human-curated baseline, exceeding the strongest official curated-skill result (67.3%, GPT-5.5/OpenHands). We also report observed failure cases and domain-level results, including performance on the 14 Natural Science tasks, to clarify when the approach does and does not help.

Digital agents are increasingly employed to automate tasks in interactive digital environments such as web pages, software applications, and operating systems. While text-based agents built on Large Language Models (LLMs) often require frequent updates due to platform-specific APIs, visual agents leveraging Multimodal Large Language Models (MLLMs) offer enhanced adaptability by interacting directly with Graphical User Interfaces (GUIs). However, these agents face significant challenges in visual perception, particularly when handling high-resolution, visually complex digital environments. This paper introduces Iris, a foundational visual agent that addresses these challenges through two key innovations: Information-Sensitive Cropping (ISC) and Self-Refining Dual Learning (SRDL). ISC dynamically identifies and prioritizes visually dense regions using a edge detection algorithm, enabling efficient processing by allocating more computational resources to areas with higher information density. SRDL enhances the agent's ability to handle complex tasks by leveraging a dual-learning loop, where improvements in referring (describing UI elements) reinforce grounding (locating elements) and vice versa, all without requiring additional annotated data. Empirical evaluations demonstrate that Iris achieves state-of-the-art performance across multiple benchmarks with only 850K GUI annotations, outperforming methods using 10x more training data. These improvements further translate to significant gains in both web and OS agent downstream tasks.

GUI agent aims to enable automated operations on Mobile/PC devices, which is an important task toward achieving artificial general intelligence. The rapid advancement of VLMs accelerates the development of GUI agents, owing to their powerful capabilities in visual understanding and task planning. However, building a GUI agent remains a challenging task due to the scarcity of operation trajectories, the availability of interactive infrastructure, and the limitation of initial capabilities in foundation models. In this work, we introduce UItron, an open-source foundational model for automatic GUI agents, featuring advanced GUI perception, grounding, and planning capabilities. UItron highlights the necessity of systemic data engineering and interactive infrastructure as foundational components for advancing GUI agent development. It not only systematically studies a series of data engineering strategies to enhance training effects, but also establishes an interactive environment connecting both Mobile and PC devices. In training, UItron adopts supervised finetuning over perception and planning tasks in various GUI scenarios, and then develop a curriculum reinforcement learning framework to enable complex reasoning and exploration for online environments. As a result, UItron achieves superior performance in benchmarks of GUI perception, grounding, and planning. In particular, UItron highlights the interaction proficiency with top-tier Chinese mobile APPs, as we identified a general lack of Chinese capabilities even in state-of-the-art solutions. To this end, we manually collect over one million steps of operation trajectories across the top 100 most popular apps, and build the offline and online agent evaluation environments. Experimental results demonstrate that UItron achieves significant progress in Chinese app scenarios, propelling GUI agents one step closer to real-world application.

With the rapid development of Large Vision Language Models, the focus of Graphical User Interface (GUI) agent tasks shifts from single-screen tasks to complex screen navigation challenges. However, real-world GUI environments, such as PC software and mobile Apps, are often complex and proprietary, making it difficult to obtain the comprehensive environment information needed for agent training and evaluation. This limitation hinders systematic investigation and benchmarking of agent navigation capabilities. To address this limitation, we introduce GUI Exploration Lab, a simulation environment engine for GUI agent navigation research that enables flexible definition and composition of screens, icons, and navigation graphs, while providing full access to environment information for comprehensive agent training and evaluation. Through extensive experiments, we find that supervised fine-tuning enables effective memorization of fundamental knowledge, serving as a crucial foundation for subsequent training. Building on this, single-turn reinforcement learning further enhances generalization to unseen scenarios. Finally, multi-turn reinforcement learning encourages the development of exploration strategies through interactive trial and error, leading to further improvements in screen navigation performance. We validate our methods on both static and interactive benchmarks, demonstrating that our findings generalize effectively to real-world scenarios. These findings demonstrate the advantages of reinforcement learning approaches in GUI navigation and offer practical guidance for building more capable and generalizable GUI agents.

With the deep integration of artificial intelligence and interactive technology, Graphical User Interface (GUI) Agent, as the carrier connecting goal-oriented natural language and real-world devices, has received widespread attention from the community. Contemporary benchmarks aim to evaluate the comprehensive capabilities of GUI agents in GUI operation tasks, generally determining task completion solely by inspecting the final screen state. However, GUI operation tasks consist of multiple chained steps while not all critical information is presented in the final few pages. Although a few research has begun to incorporate intermediate steps into evaluation, accurately and automatically capturing this process information still remains an open challenge. To address this weakness, we introduce ProBench, a comprehensive mobile benchmark with over 200 challenging GUI tasks covering widely-used scenarios. Remaining the traditional State-related Task evaluation, we extend our dataset to include Process-related Task and design a specialized evaluation method. A newly introduced Process Provider automatically supplies accurate process information, enabling presice assessment of agent's performance. Our evaluation of advanced GUI agents reveals significant limitations for real-world GUI scenarios. These shortcomings are prevalent across diverse models, including both large-scale generalist models and smaller, GUI-specific models. A detailed error analysis further exposes several universal problems, outlining concrete directions for future improvements.

Text-to-image diffusion models are gradually introduced into computer graphics, recently enabling the development of Text-to-3D pipelines in an open domain. However, for interactive editing purposes, local manipulations of content through a simplistic textual interface can be arduous. Incorporating user guided sketches with Text-to-image pipelines offers users more intuitive control. Still, as state-of-the-art Text-to-3D pipelines rely on optimizing Neural Radiance Fields (NeRF) through gradients from arbitrary rendering views, conditioning on sketches is not straightforward. In this paper, we present SKED, a technique for editing 3D shapes represented by NeRFs. Our technique utilizes as few as two guiding sketches from different views to alter an existing neural field. The edited region respects the prompt semantics through a pre-trained diffusion model. To ensure the generated output adheres to the provided sketches, we propose novel loss functions to generate the desired edits while preserving the density and radiance of the base instance. We demonstrate the effectiveness of our proposed method through several qualitative and quantitative experiments. https://sked-paper.github.io/

This paper presents first successful steps in designing search agents that learn meta-strategies for iterative query refinement in information-seeking tasks. Our approach uses machine reading to guide the selection of refinement terms from aggregated search results. Agents are then empowered with simple but effective search operators to exert fine-grained and transparent control over queries and search results. We develop a novel way of generating synthetic search sessions, which leverages the power of transformer-based language models through (self-)supervised learning. We also present a reinforcement learning agent with dynamically constrained actions that learns interactive search strategies from scratch. Our search agents obtain retrieval and answer quality performance comparable to recent neural methods, using only a traditional term-based BM25 ranking function and interpretable discrete reranking and filtering actions.

Click-based interactive segmentation (IS) aims to extract the target objects under user interaction. For this task, most of the current deep learning (DL)-based methods mainly follow the general pipelines of semantic segmentation. Albeit achieving promising performance, they do not fully and explicitly utilize and propagate the click information, inevitably leading to unsatisfactory segmentation results, even at clicked points. Against this issue, in this paper, we propose to formulate the IS task as a Gaussian process (GP)-based pixel-wise binary classification model on each image. To solve this model, we utilize amortized variational inference to approximate the intractable GP posterior in a data-driven manner and then decouple the approximated GP posterior into double space forms for efficient sampling with linear complexity. Then, we correspondingly construct a GP classification framework, named GPCIS, which is integrated with the deep kernel learning mechanism for more flexibility. The main specificities of the proposed GPCIS lie in: 1) Under the explicit guidance of the derived GP posterior, the information contained in clicks can be finely propagated to the entire image and then boost the segmentation; 2) The accuracy of predictions at clicks has good theoretical support. These merits of GPCIS as well as its good generality and high efficiency are substantiated by comprehensive experiments on several benchmarks, as compared with representative methods both quantitatively and qualitatively.

Editing real facial images is a crucial task in computer vision with significant demand in various real-world applications. While GAN-based methods have showed potential in manipulating images especially when combined with CLIP, these methods are limited in their ability to reconstruct real images due to challenging GAN inversion capability. Despite the successful image reconstruction achieved by diffusion-based methods, there are still challenges in effectively manipulating fine-gained facial attributes with textual instructions.To address these issues and facilitate convenient manipulation of real facial images, we propose a novel approach that conduct text-driven image editing in the semantic latent space of diffusion model. By aligning the temporal feature of the diffusion model with the semantic condition at generative process, we introduce a stable manipulation strategy, which perform precise zero-shot manipulation effectively. Furthermore, we develop an interactive system named ChatFace, which combines the zero-shot reasoning ability of large language models to perform efficient manipulations in diffusion semantic latent space. This system enables users to perform complex multi-attribute manipulations through dialogue, opening up new possibilities for interactive image editing. Extensive experiments confirmed that our approach outperforms previous methods and enables precise editing of real facial images, making it a promising candidate for real-world applications. Project page: https://dongxuyue.github.io/chatface/

One of the primary driving forces contributing to the superior performance of Large Language Models (LLMs) is the extensive availability of human-annotated natural language data, which is used for alignment fine-tuning. This inspired researchers to investigate self-training methods to mitigate the extensive reliance on human annotations. However, the current success of self-training has been primarily observed in natural language scenarios, rather than in the increasingly important neural-symbolic scenarios. To this end, we propose an environment-guided neural-symbolic self-training framework named ENVISIONS. It aims to overcome two main challenges: (1) the scarcity of symbolic data, and (2) the limited proficiency of LLMs in processing symbolic language. Extensive evaluations conducted on three distinct domains demonstrate the effectiveness of our approach. Additionally, we have conducted a comprehensive analysis to uncover the factors contributing to ENVISIONS's success, thereby offering valuable insights for future research in this area. Code will be available at https://github.com/xufangzhi/ENVISIONS.

Academic documents are packed with texts, equations, tables, and figures, requiring comprehensive understanding for accurate Optical Character Recognition (OCR). While end-to-end OCR methods offer improved accuracy over layout-based approaches, they often grapple with significant repetition issues, especially with complex layouts in Out-Of-Domain (OOD) documents.To tackle this issue, we propose LOCR, a model that integrates location guiding into the transformer architecture during autoregression. We train the model on a dataset comprising over 77M text-location pairs from 125K academic document pages, including bounding boxes for words, tables and mathematical symbols. LOCR adeptly handles various formatting elements and generates content in Markdown language. It outperforms all existing methods in our test set constructed from arXiv, as measured by edit distance, BLEU, METEOR and F-measure.LOCR also reduces repetition frequency from 4.4% of pages to 0.5% in the arXiv dataset, from 13.2% to 1.3% in OOD quantum physics documents and from 8.1% to 1.8% in OOD marketing documents. Additionally, LOCR features an interactive OCR mode, facilitating the generation of complex documents through a few location prompts from human.

Navigating drones through natural language commands remains challenging due to the dearth of accessible multi-modal datasets and the stringent precision requirements for aligning visual and textual data. To address this pressing need, we introduce GeoText-1652, a new natural language-guided geo-localization benchmark. This dataset is systematically constructed through an interactive human-computer process leveraging Large Language Model (LLM) driven annotation techniques in conjunction with pre-trained vision models. GeoText-1652 extends the established University-1652 image dataset with spatial-aware text annotations, thereby establishing one-to-one correspondences between image, text, and bounding box elements. We further introduce a new optimization objective to leverage fine-grained spatial associations, called blending spatial matching, for region-level spatial relation matching. Extensive experiments reveal that our approach maintains a competitive recall rate comparing other prevailing cross-modality methods. This underscores the promising potential of our approach in elevating drone control and navigation through the seamless integration of natural language commands in real-world scenarios.

3D content creation has long been a complex and time-consuming process, often requiring specialized skills and resources. While recent advancements have allowed for text-guided 3D object and scene generation, they still fall short of providing sufficient control over the generation process, leading to a gap between the user's creative vision and the generated results. In this paper, we present iControl3D, a novel interactive system that empowers users to generate and render customizable 3D scenes with precise control. To this end, a 3D creator interface has been developed to provide users with fine-grained control over the creation process. Technically, we leverage 3D meshes as an intermediary proxy to iteratively merge individual 2D diffusion-generated images into a cohesive and unified 3D scene representation. To ensure seamless integration of 3D meshes, we propose to perform boundary-aware depth alignment before fusing the newly generated mesh with the existing one in 3D space. Additionally, to effectively manage depth discrepancies between remote content and foreground, we propose to model remote content separately with an environment map instead of 3D meshes. Finally, our neural rendering interface enables users to build a radiance field of their scene online and navigate the entire scene. Extensive experiments have been conducted to demonstrate the effectiveness of our system. The code will be made available at https://github.com/xingyi-li/iControl3D.

Open-ended learning agents must efficiently prioritize goals in vast possibility spaces, focusing on those that maximize learning progress (LP). When such autotelic exploration is achieved by LLM agents trained with online RL in high-dimensional and evolving goal spaces, a key challenge for LP prediction is modeling one's own competence, a form of metacognitive monitoring. Traditional approaches either require extensive sampling or rely on brittle expert-defined goal groupings. We introduce MAGELLAN, a metacognitive framework that lets LLM agents learn to predict their competence and LP online. By capturing semantic relationships between goals, MAGELLAN enables sample-efficient LP estimation and dynamic adaptation to evolving goal spaces through generalization. In an interactive learning environment, we show that MAGELLAN improves LP prediction efficiency and goal prioritization, being the only method allowing the agent to fully master a large and evolving goal space. These results demonstrate how augmenting LLM agents with a metacognitive ability for LP predictions can effectively scale curriculum learning to open-ended goal spaces.

Multi-hop question answering (QA) requires models to retrieve and reason over multiple pieces of evidence. While Retrieval-Augmented Generation (RAG) has made progress in this area, existing methods often suffer from two key limitations: (1) fixed or overly frequent retrieval steps, and (2) ineffective use of previously retrieved knowledge. We propose MIND (Memory-Informed and INteractive Dynamic RAG), a framework that addresses these challenges through: (i) prompt-based entity extraction to identify reasoning-relevant elements, (ii) dynamic retrieval triggering based on token-level entropy and attention signals, and (iii) memory-aware filtering, which stores high-confidence facts across reasoning steps to enable consistent multi-hop generation.

LLM-based Interactive Drama is a novel AI-based dialogue scenario, where the user (i.e. the player) plays the role of a character in the story, has conversations with characters played by LLM agents, and experiences an unfolding story. This paper begins with understanding interactive drama from two aspects: Immersion, the player's feeling of being present in the story, and Agency, the player's ability to influence the story world. Both are crucial to creating an enjoyable interactive experience, while they have been underexplored in previous work. To enhance these two aspects, we first propose Playwriting-guided Generation, a novel method that helps LLMs craft dramatic stories with substantially improved structures and narrative quality. Additionally, we introduce Plot-based Reflection for LLM agents to refine their reactions to align with the player's intentions. Our evaluation relies on human judgment to assess the gains of our methods in terms of immersion and agency.

Multimodal Large Language Models (MLLMs) strive to achieve a profound, human-like understanding of and interaction with the physical world, but often exhibit a shallow and incoherent integration when acquiring information (Perception) and conducting reasoning (Cognition). This disconnect leads to a spectrum of reasoning failures, with hallucination being the most prominent. Collectively, these issues expose a fundamental challenge: the ability to process pixels does not yet confer the ability to construct a coherent, credible internal world model. To systematically dissect and address this challenge, this survey introduces a novel and unified analytical framework: ``From Perception to Cognition." We deconstruct the complex process of vision-language interactive understanding into two interdependent layers: Perception, the foundational ability to accurately extract visual information and achieve fine-grained alignment with textual instructions; and Cognition, the higher-order capability for proactive, multi-step, goal-oriented reasoning built upon this perceptual foundation, the core of which is the formation of a dynamic observe-think-verify reasoning loop. Guided by this framework, this paper systematically analyzes the key bottlenecks of current MLLMs at both layers. It surveys the landscape of cutting-edge methods designed to address these challenges, spanning from techniques that enhance low-level visual representations to those that improve high-level reasoning paradigms. Furthermore, we review critical benchmarks and delineate future research directions. This survey aims to provide the research community with a clear, structured perspective for understanding the intrinsic limitations of current MLLMs and to illuminate the path toward building next-generation models capable of deep reasoning and a genuine understanding of the world.

While generative models have excelled at creating static 3D content, the pursuit of systems that understand how objects move and respond to interactions remains a fundamental challenge. Current methods for articulated motion lie at a crossroads: they are either physically consistent but too slow for real-time use, or generative but violate basic kinematic constraints. We present DragMesh, a robust framework for real-time interactive 3D articulation built around a lightweight motion generation core. Our core contribution is a novel decoupled kinematic reasoning and motion generation framework. First, we infer the latent joint parameters by decoupling semantic intent reasoning (which determines the joint type) from geometric regression (which determines the axis and origin using our Kinematics Prediction Network (KPP-Net)). Second, to leverage the compact, continuous, and singularity-free properties of dual quaternions for representing rigid body motion, we develop a novel Dual Quaternion VAE (DQ-VAE). This DQ-VAE receives these predicted priors, along with the original user drag, to generate a complete, plausible motion trajectory. To ensure strict adherence to kinematics, we inject the joint priors at every layer of the DQ-VAE's non-autoregressive Transformer decoder using FiLM (Feature-wise Linear Modulation) conditioning. This persistent, multi-scale guidance is complemented by a numerically-stable cross-product loss to guarantee axis alignment. This decoupled design allows DragMesh to achieve real-time performance and enables plausible, generative articulation on novel objects without retraining, offering a practical step toward generative 3D intelligence. Code: https://github.com/AIGeeksGroup/DragMesh. Website: https://aigeeksgroup.github.io/DragMesh.

Mathematical reasoning remains a significant challenge for Large Language Models (LLMs) due to hallucinations. When combined with formal proof assistants like Lean, these hallucinations can be eliminated through rigorous verification, making theorem proving reliable. However, even with formal verification, LLMs still struggle with long proofs and complex mathematical formalizations. While Lean with LLMs offers valuable assistance with retrieving lemmas, generating tactics, or even complete proofs, it lacks a crucial capability: providing a sense of proof progress. This limitation particularly impacts the overall development efficiency in large formalization projects. We introduce LeanProgress, a method that predicts the progress in the proof. Training and evaluating our models made on a large corpus of Lean proofs from Lean Workbook Plus and Mathlib4 and how many steps remain to complete it, we employ data preprocessing and balancing techniques to handle the skewed distribution of proof lengths. Our experiments show that LeanProgress achieves an overall prediction accuracy of 75.1\% in predicting the amount of progress and, hence, the remaining number of steps. When integrated into a best-first search framework using Reprover, our method shows a 3.8\% improvement on Mathlib4 compared to baseline performances of 41.2\%, particularly for longer proofs. These results demonstrate how proof progress prediction can enhance both automated and interactive theorem proving, enabling users to make more informed decisions about proof strategies.

We propose Infinite-World, a robust interactive world model capable of maintaining coherent visual memory over 1000+ frames in complex real-world environments. While existing world models can be efficiently optimized on synthetic data with perfect ground-truth, they lack an effective training paradigm for real-world videos due to noisy pose estimations and the scarcity of viewpoint revisits. To bridge this gap, we first introduce a Hierarchical Pose-free Memory Compressor (HPMC) that recursively distills historical latents into a fixed-budget representation. By jointly optimizing the compressor with the generative backbone, HPMC enables the model to autonomously anchor generations in the distant past with bounded computational cost, eliminating the need for explicit geometric priors. Second, we propose an Uncertainty-aware Action Labeling module that discretizes continuous motion into a tri-state logic. This strategy maximizes the utilization of raw video data while shielding the deterministic action space from being corrupted by noisy trajectories, ensuring robust action-response learning. Furthermore, guided by insights from a pilot toy study, we employ a Revisit-Dense Finetuning Strategy using a compact, 30-minute dataset to efficiently activate the model's long-range loop-closure capabilities. Extensive experiments, including objective metrics and user studies, demonstrate that Infinite-World achieves superior performance in visual quality, action controllability, and spatial consistency.

When answering questions about images, humans naturally point, label, and draw to explain their reasoning. In contrast, modern vision-language models (VLMs) such as Gemini-3-Pro and GPT-5 only respond with text, which can be difficult for users to verify. We present SketchVLM, a training-free, model-agnostic framework that enables VLMs to produce non-destructive, editable SVG overlays on the input image to visually explain their answers. Across seven benchmarks spanning visual reasoning (maze navigation, ball-drop trajectory prediction, and object counting) and drawing (part labeling, connecting-the-dots, and drawing shapes around objects), SketchVLM improves visual reasoning task accuracy by up to +28.5 percentage points and annotation quality by up to 1.48x relative to image-editing and fine-tuned sketching baselines, while also producing annotations that are more faithful to the model's stated answer. We find that single-turn generation already achieves strong accuracy and annotation quality, and multi-turn generation opens up further opportunities for human-AI collaboration. An interactive demo and code are at https://sketchvlm.github.io/.

Experiment trackers show how training is progressing, but changing a live run still usually requires trainer-specific code. We present Interactive Training 2, an open-source control plane for steering training through a shared protocol. Training applications declare which settings and actions they expose, humans and automated controllers submit requests through the same interface, and the training loop validates and applies them at safe control points. A customized Aim workspace combines live metrics and controls with a chronological record of requests and outcomes. We demonstrate the system across five NLP and reinforcement-learning workflows. The released code and traces provide a reusable foundation for auditable human- and agent-guided training.

Large language models (LLMs) often respond even when prompts omit critical details or include misleading information, leading to hallucinations or reinforced misconceptions. We study how to evaluate and improve LLMs' ability to decide when and what to ask for clarification without sacrificing task performance. We introduce AskBench, an interactive benchmark that converts standard QA pairs into multi-turn interactions with explicit checkpoints. A unified judge loop evaluates final answers and simulates user responses as needed. AskBench covers two settings: AskMind, with intent-deficient queries requiring clarification, and AskOverconfidence, with queries containing false premises that must be identified and corrected. We further propose rubric-guided reinforcement learning with verifier-based rewards (RLVR), which uses structured rubrics to encourage targeted clarification. Experiments show consistent improvements in accuracy, rubric adherence, and interaction efficiency, with strong generalization to unseen domains.

Training large language models (LLMs) as interactive agents for controlling graphical user interfaces (GUIs) presents a unique challenge to optimize long-horizon action sequences with multimodal feedback from complex environments. While recent works have advanced multi-turn reinforcement learning (RL) for reasoning and tool-using capabilities in LLMs, their application to GUI-based agents remains relatively underexplored due to the difficulty of sparse rewards, delayed feedback, and high rollout costs. In this paper, we investigate end-to-end policy optimization for vision-language-based GUI agents with the aim of improving performance on complex, long-horizon computer tasks. We propose Agentic Replay Policy Optimization (ARPO), an end-to-end RL approach that augments Group Relative Policy Optimization (GRPO) with a replay buffer to reuse the successful experience across training iterations. To further stabilize the training process, we propose a task selection strategy that filters tasks based on baseline agent performance, allowing the agent to focus on learning from informative interactions. Additionally, we compare ARPO with offline preference optimization approaches, highlighting the advantages of policy-based methods in GUI environments. Experiments on the OSWorld benchmark demonstrate that ARPO achieves competitive results, establishing a new performance baseline for LLM-based GUI agents trained via reinforcement learning. Our findings underscore the effectiveness of reinforcement learning for training multi-turn, vision-language GUI agents capable of managing complex real-world UI interactions. Codes and models:https://github.com/dvlab-research/ARPO.git.

Graphical user interface (GUI) agents have shown promise in automating mobile tasks but still struggle with input redundancy and decision ambiguity. In this paper, we present RecAgent, an uncertainty-aware agent that addresses these issues through adaptive perception. We distinguish two types of uncertainty in GUI navigation: (1) perceptual uncertainty, caused by input redundancy and noise from comprehensive screen information, and (2) decision uncertainty, arising from ambiguous tasks and complex reasoning. To reduce perceptual uncertainty, RecAgent employs a component recommendation mechanism that identifies and focuses on the most relevant UI elements. For decision uncertainty, it uses an interactive module to request user feedback in ambiguous situations, enabling intent-aware decisions. These components are integrated into a unified framework that proactively reduces input complexity and reacts to high-uncertainty cases via human-in-the-loop refinement. Additionally, we propose a dataset called ComplexAction to evaluate the success rate of GUI agents in executing specified single-step actions within complex scenarios. Extensive experiments validate the effectiveness of our approach. The dataset and code will be available at https://github.com/Fanye12/RecAgent.

Vision-language models are increasingly deployed as computer-use agents (CUAs) that operate desktops and browsers. Top-performing CUAs are framework-based systems that decompose planning and execution, while end-to-end screenshot-to-action policies are easier to deploy but lag behind on benchmarks such as OSWorld-Verified. GUI datasets like OSWorld pose two bottlenecks: they expose only a few hundred interactive, verifiable tasks and environments, and expert trajectories must be gathered by interacting with these environments, making such data hard to scale. We therefore ask how reinforcement learning from verifiable rewards (RLVR) can best exploit a small pool of exist expert trajectories to train end-to-end policies. Naively mixing these off-policy traces into on-policy RLVR is brittle: even after format conversion, expert trajectories exhibit structural mismatch and distribution shift from the learner. We propose BEPA (Bi-Level Expert-to-Policy Assimilation), which turns static expert traces into policy-aligned guidance via self-rolled reachable trajectories under the base policy (LEVEL-1) and a per-task, dynamically updated cache used in RLVR (LEVEL-2). On OSWorld-Verified, BEPA improves UITARS1.5-7B success from 22.87% to 32.13% and raises a held-out split from 5.74% to 10.30%, with consistent gains on MMBench-GUI and Online-Mind2Web. Our code and data are available at: https://github.com/LEON-gittech/Verl_GUI.git

Reinforcement learning with verifiable rewards (RLVR) is pivotal for the continuous evolution of GUI agents, yet existing evaluation paradigms face significant limitations. Rule-based methods suffer from poor scalability and cannot handle open-ended tasks, while LLM-as-a-Judge approaches rely on passive visual observation, often failing to capture latent system states due to partial state observability. To address these challenges, we advocate for a paradigm shift from passive evaluation to Agentic Interactive Verification. We introduce VAGEN, a framework that employs a verifier agent equipped with interaction tools to autonomously plan verification strategies and proactively probe the environment for evidence of task completion. Leveraging the insight that GUI tasks are typically "easy to verify but hard to solve", VAGEN overcomes the bottlenecks of visual limitations. Experimental results on OSWorld-Verified and AndroidWorld benchmarks demonstrate that VAGEN significantly improves evaluation accuracy compared to LLM-as-a-Judge baselines and further enhances performance through test-time scaling strategies.

We aim to tackle the problem of point-based interactive segmentation, in which the key challenge is to propagate the user-provided annotations to unlabeled regions efficiently. Existing methods tackle this challenge by utilizing computationally expensive fully connected graphs or transformer architectures that sacrifice important fine-grained information required for accurate segmentation. To overcome these limitations, we propose a cascade sparse feature propagation network that learns a click-augmented feature representation for propagating user-provided information to unlabeled regions. The sparse design of our network enables efficient information propagation on high-resolution features, resulting in more detailed object segmentation. We validate the effectiveness of our method through comprehensive experiments on various benchmarks, and the results demonstrate the superior performance of our approach. Code is available at https://github.com/kleinzcy/CSFPN{https://github.com/kleinzcy/CSFPN}.

Recent advancements in camera-trajectory-guided image-to-video generation offer higher precision and better support for complex camera control compared to text-based approaches. However, they also introduce significant usability challenges, as users often struggle to provide precise camera parameters when working with arbitrary real-world images without knowledge of their depth nor scene scale. To address these real-world application issues, we propose RealCam-I2V, a novel diffusion-based video generation framework that integrates monocular metric depth estimation to establish 3D scene reconstruction in a preprocessing step. During training, the reconstructed 3D scene enables scaling camera parameters from relative to absolute values, ensuring compatibility and scale consistency across diverse real-world images. In inference, RealCam-I2V offers an intuitive interface where users can precisely draw camera trajectories by dragging within the 3D scene. To further enhance precise camera control and scene consistency, we propose scene-constrained noise shaping, which shapes high-level noise and also allows the framework to maintain dynamic, coherent video generation in lower noise stages. RealCam-I2V achieves significant improvements in controllability and video quality on the RealEstate10K and out-of-domain images. We further enables applications like camera-controlled looping video generation and generative frame interpolation. We will release our absolute-scale annotation, codes, and all checkpoints. Please see dynamic results in https://zgctroy.github.io/RealCam-I2V.

Large language models (LLMs) have recently transformed from text-based assistants to autonomous agents capable of planning, reasoning, and iteratively improving their actions. While numerical reward signals and verifiers can effectively rank candidate actions, they often provide limited contextual guidance. In contrast, natural language feedback better aligns with the generative capabilities of LLMs, providing richer and more actionable suggestions. However, parsing and implementing this feedback effectively can be challenging for LLM-based agents. In this work, we introduce Critique-Guided Improvement (CGI), a novel two-player framework, comprising an actor model that explores an environment and a critic model that generates detailed nature language feedback. By training the critic to produce fine-grained assessments and actionable revisions, and the actor to utilize these critiques, our approach promotes more robust exploration of alternative strategies while avoiding local optima. Experiments in three interactive environments show that CGI outperforms existing baselines by a substantial margin. Notably, even a small critic model surpasses GPT-4 in feedback quality. The resulting actor achieves state-of-the-art performance, demonstrating the power of explicit iterative guidance to enhance decision-making in LLM-based agents.

A significant use case of instruction-finetuned Large Language Models (LLMs) is to solve question-answering tasks interactively. In this setting, an LLM agent is tasked with making a prediction by sequentially querying relevant information from the user, as opposed to a single-turn conversation. This paper explores sequential querying strategies that aim to minimize the expected number of queries. One such strategy is Information Pursuit (IP), a greedy algorithm that at each iteration selects the query that maximizes information gain or equivalently minimizes uncertainty. However, obtaining accurate estimates of mutual information or conditional entropy for LLMs is very difficult in practice due to over- or under-confident LLM probabilities, which leads to suboptimal query selection and predictive performance. To better estimate the uncertainty at each iteration, we propose Conformal Information Pursuit (C-IP), an alternative approach to sequential information gain based on conformal prediction sets. More specifically, C-IP leverages a relationship between prediction sets and conditional entropy at each iteration to estimate uncertainty based on the average size of conformal prediction sets. In contrast to conditional entropy, we find that conformal prediction sets are a distribution-free and robust method of measuring uncertainty. Experiments with 20 Questions show that C-IP obtains better predictive performance and shorter query-answer chains compared to previous approaches to IP and uncertainty-based chain-of-thought methods. Furthermore, extending to an interactive medical setting between a doctor and a patient on the MediQ dataset, C-IP achieves competitive performance with direct single-turn prediction while offering greater interpretability.

State-of-the-art Video Scene Graph Generation (VSGG) systems provide structured visual understanding but operate as closed, feed-forward pipelines with no ability to incorporate human guidance. In contrast, promptable segmentation models such as SAM2 enable precise user interaction but lack semantic or relational reasoning. We introduce Click2Graph, the first interactive framework for Panoptic Video Scene Graph Generation (PVSG) that unifies visual prompting with spatial, temporal, and semantic understanding. From a single user cue, such as a click or bounding box, Click2Graph segments and tracks the subject across time, autonomously discovers interacting objects, and predicts <subject, object, predicate> triplets to form a temporally consistent scene graph. Our framework introduces two key components: a Dynamic Interaction Discovery Module that generates subject-conditioned object prompts, and a Semantic Classification Head that performs joint entity and predicate reasoning. Experiments on the OpenPVSG benchmark demonstrate that Click2Graph establishes a strong foundation for user-guided PVSG, showing how human prompting can be combined with panoptic grounding and relational inference to enable controllable and interpretable video scene understanding.

Mental rotation -- the ability to compare objects seen from different viewpoints -- is a fundamental example of mental simulation and spatial world modelling in humans. Here we propose a mechanistic model of human mental rotation, leveraging advances in deep, equivariant, and neuro-symbolic learning. Our model consists of three stacked components: (1) an equivariant neural encoder, taking images as input and producing 3D spatial representations of objects, (2) a neuro-symbolic object encoder, deriving symbolic descriptions of objects from these spatial representations, and (3) a neural decision agent, comparing these symbolic descriptions to prescribe rotation simulations in 3D latent space via a recurrent pathway. Our model design is guided by the abundant experimental literature on mental rotation, which we complemented with experiments in VR where participants could at times manipulate the objects to compare, providing us with additional insights into the cognitive process of mental rotation. Our model captures well the performance, response times and behavior of participants in our and others' experiments. The necessity of each model component is shown through systematic ablations. Our work adds to a recent collection of deep neural models of human spatial reasoning, further demonstrating the potency of integrating deep, equivariant, and symbolic representations to model the human mind.

Web AI agents such as ChatGPT Agent and GenSpark are increasingly used for routine web-based tasks, yet they still rely on text-based input prompts, lack proactive detection of user intent, and offer no support for interactive data analysis and decision making. We present WebSeek, a mixed-initiative browser extension that enables users to discover and extract information from webpages to then flexibly build, transform, and refine tangible data artifacts-such as tables, lists, and visualizations-all within an interactive canvas. Within this environment, users can perform analysis-including data transformations such as joining tables or creating visualizations-while an in-built AI both proactively offers context-aware guidance and automation, and reactively responds to explicit user requests. An exploratory user study (N=15) with WebSeek as a probe reveals participants' diverse analysis strategies, underscoring their desire for transparency and control during human-AI collaboration.

Creative coding and real-time shader programming are at the forefront of interactive digital art, enabling artists, designers, and enthusiasts to produce mesmerizing, complex visual effects that respond to real-time stimuli such as sound or user interaction. However, despite the rich potential of tools like GLSL, the steep learning curve and requirement for programming fluency pose substantial barriers for newcomers and even experienced artists who may not have a technical background. In this paper, we present AI Co-Artist, a novel interactive system that harnesses the capabilities of large language models (LLMs), specifically GPT-4, to support the iterative evolution and refinement of GLSL shaders through a user-friendly, visually-driven interface. Drawing inspiration from the user-guided evolutionary principles pioneered by the Picbreeder platform, our system empowers users to evolve shader art using intuitive interactions, without needing to write or understand code. AI Co-Artist serves as both a creative companion and a technical assistant, allowing users to explore a vast generative design space of real-time visual art. Through comprehensive evaluations, including structured user studies and qualitative feedback, we demonstrate that AI Co-Artist significantly reduces the technical threshold for shader creation, enhances creative outcomes, and supports a wide range of users in producing professional-quality visual effects. Furthermore, we argue that this paradigm is broadly generalizable. By leveraging the dual strengths of LLMs-semantic understanding and program synthesis, our method can be applied to diverse creative domains, including website layout generation, architectural visualizations, product prototyping, and infographics.

Recent 3D world modeling systems based on generative scene synthesis, such as Marble, can create coherent and explorable 3D environments, yet their outputs are typically static monolithic assets with limited editability and physical interaction. This restricts their use in immersive content creation and embodied simulation, where generated worlds must be actively modified and manipulated. To tackle this challenge, we present WorldAct, a framework that converts static generated 3D worlds into editable and interaction-ready scenes. WorldAct uses a multimodal agent to guide scene decomposition, identify actionable objects, reconstruct geometrically aligned object-level meshes for interaction, and restore the residual background via 3D inpainting. The resulting scenes support object-level editing, collision-aware manipulation, and embodied task execution while preserving global scene coherence. Experiments show that WorldAct enables richer interaction scenarios than the original generated scenes, suggesting a practical path toward editable and interactive 3D world models.

Recent advancements in autonomous driving (AD) have explored the use of vision-language models (VLMs) within visual question answering (VQA) frameworks for direct driving decision-making. However, these approaches often depend on handcrafted prompts and suffer from inconsistent performance, limiting their robustness and generalization in real-world scenarios. In this work, we evaluate state-of-the-art open-source VLMs on high-level decision-making tasks using ego-view visual inputs and identify critical limitations in their ability to deliver reliable, context-aware decisions. Motivated by these observations, we propose a new approach that shifts the role of VLMs from direct decision generators to semantic enhancers. Specifically, we leverage their strong general scene understanding to enrich existing vision-based benchmarks with structured, linguistically rich scene descriptions. Building on this enriched representation, we introduce a multi-modal interactive architecture that fuses visual and linguistic features for more accurate decision-making and interpretable textual explanations. Furthermore, we design a post-hoc refinement module that utilizes VLMs to enhance prediction reliability. Extensive experiments on two autonomous driving benchmarks demonstrate that our approach achieves state-of-the-art performance, offering a promising direction for integrating VLMs into reliable and interpretable AD systems.

Interactive egocentric medical image segmentation (IEMIS) plays an important role in smart-glasses-assisted medical image review, segmenting the medical targets a clinician refers to from their egocentric view. Once it succeeds, the object-level visual evidence it provides strengthens the review and underpins fine-grained analysis and clinical decision-making. However, the instruction and the video both come from the user's egocentric perspective, which poses two challenges. (1) Semantic ambiguity leaves the model unable to confirm the user-intended target. (2) Visual variability makes the segmentation jump from frame to frame. In this paper, we propose EgoMed-Agent, a multi-agent system that understands the target from the human perspective through two workflows. (1) The Target Confirmation Workflow grounds the instruction against candidate targets with a reliability score, confirming the target when the grounding is reliable and asking the user to clarify when it is not, thereby confirming the segmentation target. (2) The Localization-Guided Propagation Workflow couples mask propagation with per-frame target localization, using the localized target to correct the propagated mask whenever the two diverge, so the segmentation stays on the target across the egocentric video. Extensive experiments show that EgoMed-Agent reaches 71.34\% average Dice, far above the best text-prompted baseline (11.70\%). Our code is available at https://github.com/wdyyyyyy/EgoMed-Agent{our project page}.

We propose a diffusion-based approach for Text-to-Image (T2I) generation with consistent and interactive 3D layout control and editing. While prior methods improve spatial adherence using 2D cues or iterative copy-warp-paste strategies, they often distort object geometry and fail to preserve consistency across edits. To address these limitations, we introduce a framework for Positioning Objects Consistently and Interactively (POCI-Diff), a novel formulation for jointly enforcing 3D geometric constraints and instance-level semantic binding within a unified diffusion process. Our method enables explicit per-object semantic control by binding individual text descriptions to specific 3D bounding boxes through Blended Latent Diffusion, allowing one-shot synthesis of complex multi-object scenes. We further propose a warping-free generative editing pipeline that supports object insertion, removal, and transformation via regeneration rather than pixel deformation. To preserve object identity and consistency across edits, we condition the diffusion process on reference images using IP-Adapter, enabling coherent object appearance throughout interactive 3D editing while maintaining global scene coherence. Experimental results demonstrate that POCI-Diff produces high-quality images consistent with the specified 3D layouts and edits, outperforming state-of-the-art methods in both visual fidelity and layout adherence while eliminating warping-induced geometric artifacts.

Interactive dialogue games test a capability that static benchmarks largely leave implicit: a model must carry state across turns, interpret feedback, and choose valid actions under changing constraints. We study this setting in the LM Playschool Challenge with a 2B open-weight model, and find that many failures are not only broad knowledge failures but also local decision failures: repeated guesses, malformed actions, and violations of feedback that the model has just seen. These diagnostics motivate a training recipe organized around three steps: acquire broad game participation through supervised fine-tuning, repair mechanically verifiable failures within one targeted dialogue-game family using turn-local preference pairs, and preserve general capabilities beyond these dialogue games. In the official final evaluation, our submission improves public clemscore from 10.67 to 38.92 and closed in-domain score from 13.41 to 41.17, while approximately preserving aggregate static performance (44.14 vs. 44.24 for the baseline). Out-of-domain clemscore remains low at 7.88, with the largest gains concentrated in unseen variants of the targeted family. Our results suggest that broad SFT brings most of the model's capability improvement; turn-local supervision can be effective when failure detection is precise, with observed transfer concentrated primarily within-family.

Online form filling is a common yet labor-intensive task involving extensive keyboard and mouse interactions. Despite the long-standing vision of automating this process with "one click", existing tools remain largely rule-based and lack generalizable, generative capabilities. Recent advances in Multimodal Large Language Models (MLLMs) have enabled promising agents for GUI-related tasks in general-purpose scenarios. However, they struggle with the unique challenges of form filling, such as flexible layouts and the difficulty of aligning textual instructions with on-screen fields. To bridge this gap, we formally define the form-filling task and propose FormFactory, an interactive benchmarking suite comprising a web-based interface, backend evaluation module, and carefully constructed dataset. Our benchmark covers diverse real-world scenarios, incorporates various field formats, and simulates high-fidelity form interactions. We conduct a comprehensive evaluation of state-of-the-art MLLMs and observe that no model surpasses 5% accuracy, underscoring the inherent difficulty of the task. These findings also reveal significant limitations in current models' visual layout reasoning and field-value alignment abilities. We hope our benchmark can serve as a stepping stone for further research into robust, practical form-filling agents.

Large Vision-Language Models (VLMs) have emerged as powerful engines for autonomous GUI agents, yet their deployment is severely constrained by the substantial memory footprint and latency of the Key-Value (KV) cache during long-horizon interactions. While existing cache compression methods have proven effective for LLMs, we empirically demonstrate that they suffer from suboptimal performance in GUI scenarios due to a fundamental misalignment: unlike general visual tasks where attention sparsity varies across layers, GUI attention patterns exhibit uniform high-sparsity across all transformer layers. Motivated by this insight, we propose ST-Lite, a training-free KV cache compression framework tailored for efficient GUI agents that explicitly addresses the dynamic spatio-trajectory dependencies within GUI data streams. ST-Lite introduces a novel dual-branch scoring policy incorporating Component-centric Spatial Saliency (CSS) and Trajectory-aware Semantic Gating (TSG). Specifically, CSS preserves the structural integrity of interactive UI elements by evaluating local neighborhood saliency, while TSG mitigates historical redundancy by dynamically filtering visually repetitive KV pairs within the interaction trajectory. Extensive evaluations demonstrate that with only a 10-20% cache budget, ST-Lite achieves a 2.45x decoding acceleration while maintaining comparable or even superior performance compared to full-cache baselines, offering a scalable solution for resource-constrained GUI agents.

Natural image matting algorithms aim to predict the transparency map (alpha-matte) with the trimap guidance. However, the production of trimaps often requires significant labor, which limits the widespread application of matting algorithms on a large scale. To address the issue, we propose Matte Anything model (MatAny), an interactive natural image matting model which could produce high-quality alpha-matte with various simple hints. The key insight of MatAny is to generate pseudo trimap automatically with contour and transparency prediction. We leverage task-specific vision models to enhance the performance of natural image matting. Specifically, we use the segment anything model (SAM) to predict high-quality contour with user interaction and an open-vocabulary (OV) detector to predict the transparency of any object. Subsequently, a pretrained image matting model generates alpha mattes with pseudo trimaps. MatAny is the interactive matting algorithm with the most supported interaction methods and the best performance to date. It consists of orthogonal vision models without any additional training. We evaluate the performance of MatAny against several current image matting algorithms, and the results demonstrate the significant potential of our approach.

In the real world, autonomous driving agents navigate in highly dynamic environments full of unexpected situations where pre-trained models are unreliable. In these situations, what is immediately available to vehicles is often only human operators. Empowering autonomous driving agents with the ability to navigate in a continuous and dynamic environment and to communicate with humans through sensorimotor-grounded dialogue becomes critical. To this end, we introduce Dialogue On the ROad To Handle Irregular Events (DOROTHIE), a novel interactive simulation platform that enables the creation of unexpected situations on the fly to support empirical studies on situated communication with autonomous driving agents. Based on this platform, we created the Situated Dialogue Navigation (SDN), a navigation benchmark of 183 trials with a total of 8415 utterances, around 18.7 hours of control streams, and 2.9 hours of trimmed audio. SDN is developed to evaluate the agent's ability to predict dialogue moves from humans as well as generate its own dialogue moves and physical navigation actions. We further developed a transformer-based baseline model for these SDN tasks. Our empirical results indicate that language guided-navigation in a highly dynamic environment is an extremely difficult task for end-to-end models. These results will provide insight towards future work on robust autonomous driving agents. The DOROTHIE platform, SDN benchmark, and code for the baseline model are available at https://github.com/sled-group/DOROTHIE.

Recent work in vision-and-language demonstrates that large-scale pretraining can learn generalizable models that are efficiently transferable to downstream tasks. While this may improve dataset-scale aggregate metrics, analyzing performance around hand-crafted subgroups targeting specific bias dimensions reveals systemic undesirable behaviors. However, this subgroup analysis is frequently stalled by annotation efforts, which require extensive time and resources to collect the necessary data. Prior art attempts to automatically discover subgroups to circumvent these constraints but typically leverages model behavior on existing task-specific annotations and rapidly degrades on more complex inputs beyond "tabular" data, none of which study vision-and-language models. This paper presents VLSlice, an interactive system enabling user-guided discovery of coherent representation-level subgroups with consistent visiolinguistic behavior, denoted as vision-and-language slices, from unlabeled image sets. We show that VLSlice enables users to quickly generate diverse high-coherency slices in a user study (n=22) and release the tool publicly.

An interactive robot framework accomplishes long-horizon task planning and can easily generalize to new goals or distinct tasks, even during execution. However, most traditional methods require predefined module design, which makes it hard to generalize to different goals. Recent large language model based approaches can allow for more open-ended planning but often require heavy prompt engineering or domain-specific pretrained models. To tackle this, we propose a simple framework that achieves interactive task planning with language models. Our system incorporates both high-level planning and low-level function execution via language. We verify the robustness of our system in generating novel high-level instructions for unseen objectives and its ease of adaptation to different tasks by merely substituting the task guidelines, without the need for additional complex prompt engineering. Furthermore, when the user sends a new request, our system is able to replan accordingly with precision based on the new request, task guidelines and previously executed steps. Please check more details on our https://wuphilipp.github.io/itp_site and https://youtu.be/TrKLuyv26_g.

Designing robotic agents to perform open vocabulary tasks has been the long-standing goal in robotics and AI. Recently, Large Language Models (LLMs) have achieved impressive results in creating robotic agents for performing open vocabulary tasks. However, planning for these tasks in the presence of uncertainties is challenging as it requires chain-of-thought reasoning, aggregating information from the environment, updating state estimates, and generating actions based on the updated state estimates. In this paper, we present an interactive planning technique for partially observable tasks using LLMs. In the proposed method, an LLM is used to collect missing information from the environment using a robot and infer the state of the underlying problem from collected observations while guiding the robot to perform the required actions. We also use a fine-tuned Llama 2 model via self-instruct and compare its performance against a pre-trained LLM like GPT-4. Results are demonstrated on several tasks in simulation as well as real-world environments. A video describing our work along with some results could be found here.

Reverse engineering in the realm of Computer-Aided Design (CAD) has been a longstanding aspiration, though not yet entirely realized. Its primary aim is to uncover the CAD process behind a physical object given its 3D scan. We propose CAD-SIGNet, an end-to-end trainable and auto-regressive architecture to recover the design history of a CAD model represented as a sequence of sketch-and-extrusion from an input point cloud. Our model learns visual-language representations by layer-wise cross-attention between point cloud and CAD language embedding. In particular, a new Sketch instance Guided Attention (SGA) module is proposed in order to reconstruct the fine-grained details of the sketches. Thanks to its auto-regressive nature, CAD-SIGNet not only reconstructs a unique full design history of the corresponding CAD model given an input point cloud but also provides multiple plausible design choices. This allows for an interactive reverse engineering scenario by providing designers with multiple next-step choices along with the design process. Extensive experiments on publicly available CAD datasets showcase the effectiveness of our approach against existing baseline models in two settings, namely, full design history recovery and conditional auto-completion from point clouds.

Interactive segmentation of 3D Gaussians opens a great opportunity for real-time manipulation of 3D scenes thanks to the real-time rendering capability of 3D Gaussian Splatting. However, the current methods suffer from time-consuming post-processing to deal with noisy segmentation output. Also, they struggle to provide detailed segmentation, which is important for fine-grained manipulation of 3D scenes. In this study, we propose Click-Gaussian, which learns distinguishable feature fields of two-level granularity, facilitating segmentation without time-consuming post-processing. We delve into challenges stemming from inconsistently learned feature fields resulting from 2D segmentation obtained independently from a 3D scene. 3D segmentation accuracy deteriorates when 2D segmentation results across the views, primary cues for 3D segmentation, are in conflict. To overcome these issues, we propose Global Feature-guided Learning (GFL). GFL constructs the clusters of global feature candidates from noisy 2D segments across the views, which smooths out noises when training the features of 3D Gaussians. Our method runs in 10 ms per click, 15 to 130 times as fast as the previous methods, while also significantly improving segmentation accuracy. Our project page is available at https://seokhunchoi.github.io/Click-Gaussian